Thanks guys for the info and suggestions. I'm thinking of using SS also
since I have no experience with Dyneema line, but Dyneema sounds like it
may be easier to work with.
thanks
Rod Fisk
On Wed, Oct 2, 2019 at 12:47 PM CHARLES SCHEAFFER
wrote:
> FWIW, I like amsteel where I can see it. I spli
I wasn’t looking in the right place. The currently listed address is:
mana...@marmuseum.ca
From: Bill Coleman via CnC-List
Sent: Thursday, October 03, 2019 11:58 AM
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Subject: Re: Stus-List 36-1 centerboard pendant
My last membership card lists a
Subject: Re: Stus-List 36-1 centerboard pendant
I was looking for contact info on the Museum’s website but couldn’t find
anything other than “moderator” e-mail addresses. Will check the C&C list
archives. Thanks.
From: Tim <mailto:cnc-list@cnc-list.com> Rutherford via CnC-L
list
Subject: Re: Stus-List 36-1 centerboard pendant
Thanks Richard - I just joined the museum and sent an email request to the
curator. It appears the museum is operational by their web presence and active
phone number (that went to voicemail). I'll reply and let the group know what I
; Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
> -Original Message-
> From: Tim Rutherford via CnC-List
> To: cnc-list
> Cc: Tim Rutherford
> Sent: Thu, Oct 3, 2019 12:44 am
> Subject: Re: Stus-List 36-1 centerboard pendant
>
> This is really good dis
5 C&C 37 CB; Ohio River, Mile 584.4
Richard N. Bush Law Offices
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255
-Original Message-
From: Tim Rutherford via CnC-List
To: cnc-list
Cc: Tim Rutherford
Sent: Thu, Oct 3, 2019 12:44 am
Subject: Re: Stus-
is about the same.
>
> Since that disaster, I have the pennant replaced every 5-6 years with SS
> cable. This cost is but a small fraction of building a new board and
> installing the boat over it--believe me I know!
>
> Charlie Nelson
> 1995 C&C 36 XL/kcb
> Water
ant replaced every 5-6 years with SS
cable. This cost is but a small fraction of building a new board and
installing the boat over it--believe me I know!
>
> Charlie Nelson
> 1995 C&C 36 XL/kcb
> Water Phantom
>
>
>
>
>
>
> -Original Message-
> From: Bruce Whitmore via C
-Original Message-
From: Bruce Whitmore via CnC-List
To: cnc-list
Cc: Bruce Whitmore
Sent: Wed, Oct 2, 2019 2:25 pm
Subject: Re: Stus-List 36-1 centerboard pendant
Hi Charles,
I agree with you. However I have a related question...
On our C&C 37/40+, our centerboard is HEAVY! I'
This cost is but a small fraction of
building a new board and installing the boat over it--believe me I know!
Charlie Nelson1995 C&C 36 XL/kcbWater Phantom -Original Message-
From: Bruce Whitmore via CnC-List
To: cnc-list
Cc: Bruce Whitmore
Sent: Wed, Oct 2, 2019 2:25 pm
Subje
Hi Charles,
I agree with you. However I have a related question...
On our C&C 37/40+, our centerboard is HEAVY! I'm talking enough that I not
only have to use the cabintop winch to get it up, but even in the slow speed
when I am feeling particularly wimpy. I have also heard of another 37/40+
FWIW, I like amsteel where I can see it. I spliced my lifelines in amsteel. And
I replaced a SS cable in my vang with dyneema. I use soft schackles. But I
think I'd prefer a centerboard pendant to be SS where it can stand up to unseen
abrasion & barnacles and will last 20 + years. Am I overthink
Hi Rod,
My setup is a little different, but may be more easily serviced.
I've done this a couple of times last year and had to follow up to get the
dimensions exactly right. We did it in the water - diver worked below. We
sent down a light gauge messenger line and used it to pull in the new
penda
Rod, the arrangement on my boat is a thimble to a shackle at the centerboard.
You will have to cut the wire the remove it as the thimble will not fit
through the tube. My pendant has an aircraft fork on deck. The only thimble
is at the board.
I hope this helps,
Mike
Mike Brannon
XL/kcbWater Phantom
-Original Message-
From: Rod Fisk via CnC-List
To: cnc-list
Cc: Rod Fisk
Sent: Tue, Oct 1, 2019 1:08 pm
Subject: Stus-List 36-1 centerboard pendant
I have to replace the wire pendant on my 1981 36-1. There are some broken wires
where the cable wraps around the thimb
I have to replace the wire pendant on my 1981 36-1. There are some broken
wires where the cable wraps around the thimble at the deck end. Does anyone
have any detailed specs or drawings? I work at an industrial rigging shop
so I can have a new one made. I also want to know what to expect when I
lif
16 matches
Mail list logo
