Hi Dennis,
I had hull #111, 1972 and the rudder log support
arrangement is just like that shown for Touch
é
including the three short plywood exposed gussets and grey paint. :)
Okay, I changed the water-pump grease cup to an
industrial style spring loaded unit for auto feed.
The "Red &
My hull number, in the photos, is #202, July '73.
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 1/29/2019 1:40 PM, Dennis C. via CnC-List wrote:
Yep. I wonder what hull number they made the design change? touche'
is #83.
Dennis C.
On Tue, Jan 29, 2019 at 10:54 AM schiller via CnC-List
m
The one right after C&C learned the chain stops failed.
From: Dennis C. via CnC-List
Sent: Tuesday, January 29, 2019 1:40 PM
To: CnClist
Cc: Dennis C.
Subject: Re: Stus-List Touche' steering system rebuild - update 1
Yep. I wonder what hull number they made the design change? touch
Correction: Thanks to Neil who sent pics.
Dennis C.
On Tue, Jan 29, 2019 at 8:21 AM Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:
> The original post is below.
>
> My buddy has the pedestal and associated parts for stripping and painting
> with AwlGrip. Aircraft stripper does indeed r
Yep. I wonder what hull number they made the design change? touche' is
#83.
Dennis C.
On Tue, Jan 29, 2019 at 10:54 AM schiller via CnC-List <
cnc-list@cnc-list.com> wrote:
> Dennis,
>
> Looks very similar to what was on Corsair, Hull #7.
>
> https://drive.google.com/open?id=1sTBZGtbZlym6_0Iw0
Dennis,
Looks very similar to what was on Corsair, Hull #7.
https://drive.google.com/open?id=1sTBZGtbZlym6_0Iw0S5DZOiWYHahCVI7
Neil Schiller
1983 C&C 35-3, #028. "Grace"
Whitehall, Michigan
WLYC
On 1/29/2019 9:20 AM, Dennis C. via CnC-List wrote:
The original post is below.
My buddy has the
Sounds like a good plan, Dennis.
The quadrant stop on my boat is entirely different, so that a single stop
pushes backwards instead of two stops pushing inwards (side to side). Based on
the photos, I doubt you could configure the style on my boat into your existing
set-up.
I’m trying to remem
