Re: Stus-List cracked boom

My tub still has one, works OK. Cheers, Paul Orange Crush C&C27 MkII, Sidney BC. From: CnC-List on behalf of Russ & Melody via CnC-List Sent: November 6, 2016 9:36 AM To: cnc-list@cnc-list.com Cc: Russ & Melody Subject: Re: Stus-List cracke

Re: Stus-List cracked boom

Wow. A sliding gooseneck! That takes me way back in time, like the 60s & early 70s. Thanks for sharing. Cheers, Russ Sweet 35 mk-1 At 08:47 AM 06/11/2016, Jerome wrote: From: "SAIL Magazine" <sailmagaz...@e.sailmagazine.com> Date: No

Re: Stus-List cracked boom

Sent from my iPhone Begin forwarded message: > From: "SAIL Magazine" > Date: November 6, 2016 at 11:31:50 AM EST > To: > Subject: DIY: Installing a New Boom > Reply-To: "Marine Group" > > > > View online > > > November 06, 2016 > > > CONNECT WITH US >

Re: Stus-List Cracked Boom

Boom cracked at boom vang attachment: I'd get it welded and ask for some reinforcement like an aluminum pipe be welded or screwed inside to spread the load of the vang. You have a chance to make the thing stronger, take it. If you replace it, I'd highly recommend Selden. My personal favori

Re: Stus-List Cracked Boom

I'll be there earlier. There will probably be a parking problem, as SYSCO has combined their awards banquet with OCSA's. Look for me when you arrive, and I'll look at your boom if it's convenient. Alan On Thu, Nov 3, 2016 at 10:00 AM, Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: >

Re: Stus-List Cracked Boom

Alan I'll be there around 5 Fred On Nov 3, 2016 8:07 AM, "ALAN BERGEN via CnC-List" wrote: > Fred: > > If you're going to be at the Tropical Awards Party on Saturday, maybe I > can take a look at your boom. > > Alan > > On Thu, Nov 3, 2016 at 6:45 AM, Fred Hazzard via CnC-List < > cnc-list@cnc-l

Re: Stus-List Cracked Boom

Fred: If you're going to be at the Tropical Awards Party on Saturday, maybe I can take a look at your boom. Alan On Thu, Nov 3, 2016 at 6:45 AM, Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: > Alan, my boom had been welded in the same place. The weld broke. I had a > large fibergl

Re: Stus-List Cracked Boom

Alan, my boom had been welded in the same place. The weld broke. I had a large fiberglass and carbon boot made that was epoxied in place. So far all good after almost 10,000 miles. I think if you can have crack welded and then a plate formed and welded over the area it is cheaper solution. Fre

Re: Stus-List Cracked Boom

I would not recommend welding. There is a lot of force on the boom at the boom bang attachment point so my recommendation is to get a replacement. Mine broke during a race because of a small crack I had not seen. Interestingly my rigger suggested the boom section (the original boom) was not strong

Re: Stus-List Cracked Boom

The race boat I crew on had this happen. IIRC they went to Annapolis Spars to get a replacement. I wouldn't hesitate to contact a welder to see if they can repair it. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Nov 2, 2016 9:54 PM, "ALAN BERGEN via CnC-List" wrote: > After a race o