I used 1.5 - 2 gallons on my 30MKI
Depending on the year and how much of the old stuff I took off.
Two good coats and a third on the waterline and leading edges of the
keel/hull/ruddder would still be less than two gallons on Ultra.
That paint worked out great for me. I switched to petit because
January 10, 2016 12:17:51 PM
Subject: Re: Stus-List Bottom paint help needed
Thanksfor all the advise.
I will purchase 2 gallons. Its what The yard put on last time and it did well.
I will use Ultra again.
The yard did it last time. I am going to save on the labor this time and DYI.
Just
.
Steve Thomas
Port Stanley, ON
- Original Message -
From: Ronald B. Frerker via CnC-List
To: cnc-list@cnc-list.com
Cc: Ronald B. Frerker
Sent: Sunday, January 10, 2016 13:04
Subject: Re: Stus-List Bottom paint help needed
Curtis,
I wet sand with one of those abrasive
:* Curtis
> *Sent:* Sunday, January 10, 2016 11:17 AM
> *Subject:* Re: Stus-List Bottom paint help needed
>
> Thanksfor all the advise.
> I will purchase 2 gallons. Its what The yard put on last time and it did
> well. I will use Ultra again.
> The yard did it last time. I am
List
To: "cnc-list@cnc-list.com"
Cc: Curtis
Sent: Sunday, January 10, 2016 11:17 AM
Subject: Re: Stus-List Bottom paint help needed
Thanksfor all the advise. I will purchase 2 gallons. Its what The yard put on
last time and it did well. I will use Ultra again. The yard did it la
Thanksfor all the advise.
I will purchase 2 gallons. Its what The yard put on last time and it did
well. I will use Ultra again.
The yard did it last time. I am going to save on the labor this time and
DYI.
Just not sure if a light sand will be suffice.I will heavy on the leading
edges and the
Curtis
Where are you located? I have a half gallon or so of Ultra for discounted
price if you are local
John and Maryann
Legacy III
1982 C&C 34
Noank, CT
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Curtis via
CnC-List
Sent: Saturday, January 09, 2016 10:39 PM
Curtis, I use a gallon of Hydrocoat (it is thick) each time I paint. It barely
covers – one coat. I, like others, paint the waterline, keel leading edge,
rudder first and then fill in while spreading the paint out. The old paint does
not leach away on the flat parts of the middle hull, but does
Hi Curtis,
You'll probably need 5 litres. I use about 6 litres.
Sucks, yes. On the bright side, if you had the larger boat you would
need 9 litres. :)
Cheers, Russ
Sweet 35 mk-1
At 07:39 PM 09/01/2016, you wrote:
Interlux Ultra with Biolux. How much paint should I need to pa
I've always needed just over 1gal to do a complete job. Maybe I could do it
thinner, but I don't think so. When I try to get by with one gallon, I paint
the first third completely, the leading edge of the keel, the complete rudder
and the first foot of depth. Then I do a very light and incomp
1 gallon will probably be sufficient. I buy 2 for my 37+ and I usually
have plenty for a second coat on the leading edges and the waterline and
still have left over. The cans often have advice on the square footage of
coverage per can.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Jan 9,
11 matches
Mail list logo
