John, I winter in northern Michigan, and I have no doubt that the sun hitting
one side of my rudder when on the hard through the winter heated up that
side(vc 17 gray) drawing moisture to that side, and freezing at night. That
side of rudder developed hairline, very hairline, cracks in gel co
Finally Did this 2 years ago..best thing ever did for the boat. Look in
archives, there is recent thread with good ideas Bill Walker
On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List
wrote:
Looking at putting a garboard on my 35 mark 3. Has anyone done this? Loo
: Saturday, October 16, 2021 10:34:26 AM
To: Stus-List
Cc: Joel Delamirande
Subject: Stus-List Re: Fwd: Read Sarah’s review
What going on here
On Sat, Oct 16, 2021 at 10:30 AM Matthew via CnC-List
wrote:
And throw some used cotter pins on his deck.
From: WILLIAM WALKER via CnC-List
Sent: Saturday
No, I say we flood his inbox, and drill holes in his hull...Bill Walker
On Saturday, October 16, 2021, 08:06:14 AM EDT, Joel Delamirande via
CnC-List wrote:
Is this supposed to be here?
On Fri, Oct 15, 2021 at 11:55 PM Kevin Driscoll via CnC-List
wrote:
See private feedback
-
Good morning!First, I am not an electrical engineer. So I would appreciate
keeping that in mind.What I would appreciate is a recommendation with specific
model, make, etc. Of a solar charger with any gizmos built in that could keep
my house batteries, two agm (I think 200 amp hour?) topped up w
Guys and Gals,This is premature, but testing the water.I have a Main, #s 1, 2,
& 3 headsails for a 1981 CnC 36 in UK Tape Drive for sale. #s 1 & 3 are in
nearly new condition. Main in good to excellent condition. #2 was roller
furled and used a lot, needs new sun protection and some repair. No
On my 1981 C n C 36 the cabin interior headliner is a vinyl glued to a thin
sheet of Luan plywood. I have removed all and am going to seal coat the
plywood with epoxy. Wondering if anyone painted theirs and how it turned out
and lasted. I see some spray paint for plastics and wonder if that m
Great idea...I will put that in my data bank...Bill WalkerC n C 36Pentwater,
Mi.
On Thursday, August 12, 2021, 03:46:38 PM EDT, svrebeccaleah via CnC-List
wrote:
FWI. Back in the day of rigging airplanes. I would use heat shrink (non
adhesive type) to connect the old and new cables. P
Sent $ before you raise the goal, lol.Bill Walker
On Monday, August 9, 2021, 01:41:02 PM EDT, JohnKelly Cuthbertson via
CnC-List wrote:
I should have made it a harder challenge :-) Thanks to all that contributed to
the Marine Museum of the Great Lakes campaign to digitize the C&C dr
Steve, Raw water intake is drawing water in by means of a pump...no such
mechanism is involved with a PSS seal. Bill Walker CnC 36Pentwater, Mi.
On Tuesday, July 13, 2021, 12:45:23 PM EDT, Steve Thomas via CnC-List
wrote:
Bob,
In the 20 years I've had my C&C27, little bits of wo
I have had PSS droplets on two boats for over 20 years with absolutely no
issues. I wonder if failure related to fact it was power boat with more hours
of turning shaft at higher rpms and maybe not sufficient cooling?In the end,
it's what let's you sleep at night that's important.Bill Walker
Where is 37R located?
On Thursday, July 8, 2021, 08:04:26 AM EDT, Joel Delamirande via CnC-List
wrote:
Me too I would like to revive the brand I curious to see the boat
On Thu, Jul 8, 2021 at 6:22 AM Bob Tallman wrote:
Good morning,
37R is for the racing model of that line.You had:37+
Dont know your location. I am in Michigan. Have mine through Fremont
Insurance Co. Agreed value policy, inland marine policy terms with all gear,
etc. Reasonable and no problem. I have been with them 10 years. My boat is
40 this year. Bill Walker C&C 36Pentwater, Mi.
On Tuesday, June
Good morning, I dont have a loose gauge for my solid shrouds. Wondering how
much slack do you see on leeward shrouds when on beam reach in 10 knots of
wind? Shrouds seem tight enough when at the dock, but a little floppy on
leeward side when sailing.Bill Walker CnC 36-1Pentwater, Mi.Thanks
Yes, I got color strips from home depot, found a good match and took kiwis
grip there. They tinted for free. Color match was excellent and holding up
well after about 7 years. Thinking of recoating this summer, but wearing very
well.Bill Walker Evening StarCnC 36Pentwater, Mi
On M
side the cabin. There seems to be no
screws in those holes. Is the outside handrail attached to the cabin with
screws or something? Mine isn’t coming off yet. Thx Bo
On Mon, Mar 29, 2021 at 12:21 WILLIAM WALKER via CnC-List <
cnc-list@cnc-list.com> wrote:
Agree,
So, I haven't gotten any emails for a couple days. None in spam or trash. Is
it just quiet?Bill Walker Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://ww
Agree, I said glue but always use varnish.Bill Walker
On Monday, March 29, 2021, 06:47:16 AM EDT, James Hesketh via CnC-List
wrote:
WILLIAM wrote:
snip >>
After the glue dries use a Sharp chisel to level, a little sandpaper and the
apply finish.
I'd always been told it's bet
Yes, it is just plug covering screw head. Use point of knife or small
screwdriver to split plug with the grain of wood. You can buy a plug cutter
for your drill at most big bo stores and find a teak scrap to cut new plug.
Simple.When reinstall they will be proud of surface. After the glue d
Thanks all for comments and suggestions. Ran the idea past the commodore and
I am tabling idea. But, I did find a number of reasonable options on Amazon
with built in dvd players. Still may take the plunge.Bill Walker CnC
36Pentwater, Mi.
Thanks to all of the subscribers that contributed to
-5V-4-62A-/153437407849?_trksid=p2349624.m46890.l49292
Josh MuckleyS/V Sea Hawk 1989 C&C 37+Solomons, MD
On Thu, Mar 18, 2021, 15:33 WILLIAM WALKER via CnC-List
wrote:
Looking at installing 12 volt tv with built in dvd player and digital antenna
to entertain spouse with movi
Looking at installing 12 volt tv with built in dvd player and digital antenna
to entertain spouse with movies in the evening.Anybody tackled this? Issues I
haven't thought about? Bill Walker CnC 36Pentwater, Mi.Thanks to all of the subscribers that contributed to the list to help with the
cost
Ted, Could you provide info on parts you used? What material did you use as
base for track? I assume replace two of the toe rail machine screws with
proper length. Love this idea. Bill WalkerCnC 36Pentwater, Mi.
On Thursday, March 11, 2021, 06:32:04 AM EST, Dave S via CnC-List
wrote:
Guys, my apologies for leaving the Zoom meeting last night without saying
goodbye...I got a message on my computer that my internet was unstable (not me,
my internet) and then it just quite.Hope to join again in the future. Encourage
others to do so too.Thanks Stu for hosting.Bill Walker Evenin
Joel, You may have to copy the url and paste into your browser.BillCnC 36
On Sunday, February 28, 2021, 10:30:19 AM EST, Stu via CnC-List
wrote:
Joel – must be on your end. I tried and it worked – others have already
registered. Stay safe & healthyStu From: Joel Delamirande via CnC
Charlie, I sail and race Lake Michigan. I moved from a UK laminate to
Nordac in 2019. My previous UK was a 145, furled beautifully.I went with a 150
Nordac since I too felt I gave up too much on August light air days. It is a
MUCH heavier sail, but still furls nicely, though the furled p
I did my cockpit sole about 5 years ago. Still looks great. I am a OEM kind
of guy, and it looks and feels like original. Two suggestions, 1. Practice a
little on a piece of plywood to get the feel for texture you want. 2. Get a
bunch of paint chips from Home Depot, etc. to match your color
I agree with Jeff, likely will be unable to reuse the threaded holes, but I bet
the impact driver will remove. I have then drilled, tapped and installed
slightly larger machine screw with anti seize. Good luck.Bill Walker
-Original Message-
From: Jeff Nelson via CnC-List
To: cnc-lis
Get an impact drill driver with the right size bit and likely will not have
problem.Bill Walker C&C 36Pentwater, Mi.
-Original Message-
From: Adam Hayden via CnC-List
To: cnc-list@cnc-list.com
Cc: Adam Hayden
Sent: Thu, Jan 14, 2021 06:29 AM
Subject: Stus-List Screw removal
Hello
I
-Original Message-
From: Stu via CnC-List
To: Stus-List
Cc: Stu
Sent: Sat, Jan 9, 2021 11:56 AM
Subject: Stus-List C&C Rendezvous at Maritime Museum in Kingston?
I would love to know about campground. Gayle and I would come from Michagan
across, assuming late September or October.B
Stu, cant make it sorry...if you need my space for rendezvous cancel me
-Original Message-
From: Stu
To: C&C Email List
Sent: Mon, Dec 7, 2020 12:02 PM
Subject: Stus-List Rendezvous Reminder
We still have lots of dock space available for our Pre-Christmas Rendezvous.
We have qu
Martin, I am a member of Pentwater Yacht Club. Unfortunately because of high
water and its age the building will likely be replaced in the next year with a
new structure.If you have any old pictures or such from ymthat era qmi would be
interested. I sail my 36 out of Pentwater.Bill Walker
I have a blooper. Prior owner said he always gained half a knot when he put
it up and half a knot when he dropped it..Bill Walker Evening Star1981 CnC 36
-Original Message-
From: schiller
To: cnc-list
Sent: Sat, Dec 5, 2020 06:57 PM
Subject: Stus-List Re: Calypso 1971 C&C 43 update
Nate, I did this last fall. Best thing I have ever done for the boat. I
used rare earth magnets as you suggest. Taped one inside bilge where I wanted
drain and other magnet "pops" into place on outside. I drew a circle around
the outside magnet and drilled from the outside. Make sure w
https://goodoldboat.com/mail-buoy-august-2020/
Good old boat article this monthBill Walker CnC 36Pentwater, Mi.On the hard___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want
I was thinking it was insanity to repower with electric until Rob Ball
posted...obviously much respect for him.Still, I think if you have diesel
smell, overheating, excessive vibration, etc., it is a maintenance issue. I
have none of that.Of course any combustion engine will have some vibration.
Anyone installed bow anchor roller on a C&C36? Photo? Offline to me at
wwadjour...@gmail.com.bill Walker Evening StarC&C 36Pentwater, Mi.___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated.
You might not say it out loud, but you do have a favorite...boat that is..Bill
Walker C&C 36Pentwater, Michigan
-Original Message-
From: Rob Ball via CnC-List
To: Richard Bush ; cnc-list@cnc-list.com
Cc: Rob Ball
Sent: Wed, Jul 22, 2020 02:53 PM
Subject: Re: Stus-List New-guy C&C 40
Ok, I have resisted, but I am 72, 10 year owner of 81 CnC 36Bill
WalkerPentwater, Mi.___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to sen
Impact will get it...no worries.
On Tuesday, June 2, 2020 Robert Abbott via CnC-List
wrote:
Mike,
I have been applying the both the PB Blaster and 50% ATF - 50% Acetone
solution on the stanchion and screw for the past month.time is not going to
loosen it.
I need an 'impact screw driv
I drilled for garboard drain last fall. I will install perko drain in spring.
I used 2 earth magnets to locate where to drill...one low inside bilge taped
where I wanted the drain, then just moved the other on outside of keel stub
until it "located" it's mate and voila, knew exactly where to dr
Can't the race committee protest OBSERVED violation under RSS 60.2?
Bill Walker
On Sunday, December 22, 2019 detroito91 via CnC-List
wrote:
Race Committee cannot protest if they see something wrong. Only observe.Jim
Schwartz SEA YA !38 Landfall Washington nc
Sent from my Verizon, Samsung G
piece. In the gen 2 the rotating part attached to the shaft is
also a spring pack which is how compression is maintained. Since it is a
spring it is also less prone to relaxing over time such as a typical bellows
system.
Josh
On Wed, Dec 11, 2019, 2:21 PM WILLIAM WALKER via CnC-List
w
Josh,
The PYI seal also is capable of storing a spare seal on the shaft in front
of the seal. I have one.
Bill Walker
C & C 36
Evening Star
Pentwater, Michigan
On Wednesday, December 11, 2019 Josh Muckley via CnC-List
wrote:
Yep vented.
The PYI and Lasdrop seals rated the highest in a pract
grease fitting – issue is water / rain
leaking in
John
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of WILLIAM
WALKER via CnC-List
Sent: Saturday, November 16, 2019 1:22 PM
To: cnc-list@cnc-list.com
Cc: WILLIAM WALKER
Subject: Re: Stus-List 34 rudder shaft bearing
When was last time you put grease in the cup on the shaft log? If you don't
have play in the rudder shaft, this may be your problem. I am sure you know
there is a grease cup on the shaft log where it comes through thhe hull. Use
Green Grease, a waterproof grease. Fill the cup, tighten to fo
Hari, Sail numbers can be selected by owner, assigned by the manufacturer,
boat class, or sailing organizations. If you plan to join US Sailing and sail
in US or offshore coastal then US Sailing will assign you a number, if you
wish. If you are racing in a class, the class association will
17/2019 5:11 PM, WILLIAM WALKER via CnC-List wrote:
Anyone with a CnC 36 installed an anchor roller? Send photos please..
At 71 decided it's time..
Bill Walker
Pentwater, Mi.
___
Thanks everyone for supporting this list with your contribut
Anyone with a CnC 36 installed an anchor roller? Send photos please..
At 71 decided it's time..
Bill Walker
Pentwater, Mi.
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want t
Would love some pictures of install of eindlass on a 36-1.
Bill Walker
Pentwater, Mi.
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to se
the boat if you want to come down to Whitehall this weekend.
Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC
On 8/15/2019 8:40 AM, WILLIAM WALKER via CnC-List wrote:
Same problem here...
Bill Walker
CnC 36
On Wednesday, August 14, 2019 Ji
Tom, can you be more descriptive? Blade between track and bottom of car?
Bill Walker
On Thursday, August 15, 2019 sancton.tom via CnC-List
wrote:
Had the same thing happen to me this week. Took the edge of a knife and pried
up the pin enough to move it out of the hole and then inserted the pi
Same problem here...
Bill Walker
CnC 36
On Wednesday, August 14, 2019 Jim Reinardy via CnC-List
wrote:
#yiv8457587910 html {background-color:transparent !important;}#yiv8457587910
body {background-color:transparent
!important;color:#333;line-height:150%;font-family:"-apple-system",
"Helvetic
I saw that they went into receivership in 2017 and no buyers at sale. Don't
know if accurate..source Wikipedia.
A company wouldnt make me a doormat with logo and name of my boat without some
paperwork..
Bill Walker
CnC 36
On Monday, August 5, 2019 Stu via CnC-List wrote:
Bill and others – I do
I copied the CnC logo off the web someplace...Is there a current owner of these
copyrights that need permission from to use on an item not for sale, but for
personal use?
Bill Walker
CnC 36
___
Thanks everyone for supporting this list with your cont
Only issue I have encountered is that oil pickup may get above oil level if
heeled significantly...causing oil pressure alarm to go off...happened once to
me on port tack even though oil level good...yanmar 3GM30...
Bill Walker
CnC 36
On Wednesday, July 31, 2019 Matthew L. Wolford via CnC-List
If you want a cnc logo mug, download the logo to your device, go to Vistaprint
or another online mfg and order one.
10.49 on vistaprintand no, I don't have permission to use logo, but not
selling them either.
Need sale code SALE40.
Bill Walker
CnC 36
Pentwater, Mi
_
Tom, I did my cockpit sole with Kiwi Grip 5 years ago and it still looks great.
Kiwi Grip is tintable by Home Depot or any paint store just like a quart of
water based paint. I got a bunch of color chips and it matches very very well.
As to texture, I think those that have trouble matching the f
n be
sourced. If nothing else has changed on the boat and the halyard has just
started slipping, this is the usual culprit.
Chuck Gilchrest S/V HalfMagic1983 35 LFPadanaram, MA
Sent from my iPhone
On Jun 25, 2019, at 12:24 PM, WILLIAM WALKER via CnC-List
wrote:
I have hi tech low stretch but slip
I have hi tech low stretch but slippery halyard which my clutches just won't
hold. Thinking of adding another cover at the point where they pass through
clutch.
Any thoughts or solutions beyond replacing clutches or halyards. now I take to
a cleat, but cumbersome as I have both on same side w
I have had Garhauer on several boats with no problems.
Bill Walker
CnC 36
On Tuesday, June 25, 2019 Edd Schillay via CnC-List
wrote:
Listers,
My rigid boom vang has seen better days and I’m looking to do a replacement.
Can anyone recommend a good option for a boat in the 37-40’ range that won’t
Listen to Frwd...he is knowledgeable, unbiased and I trust him...i don't trust
easily..
Bill Walker
CnC 36
On Monday, June 24, 2019 Frederick G Street via CnC-List
wrote:
Alfred at Schooner rebuilds/remans tons of diesel engines per year; he markets
his service es through www.dieselenginetrade
Andrew,
I have had Kiwi Grip tinted at Home Depot. Get a paint chip from then that
matches color you want and they will do it...i did cockpit sole and got a good
match of color and texture. Dennis' comments are all good too.
Bill Walker
CnC 36
Evening Star
On Tuesday, June 4, 2019 Andrew
Anyone have source for some aluminum jam cleats like on early 80s cnc?
Bill Walker
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to sen
Mike,
I have done my cockpit sole with kiwi grip..it is easy to reduce the peaks
and valleys that great non skid by pressure used on the roller...i used the
roller provided by kiwi grip and it worked out great...practice on a piece of
plywood if you are concerned.
BTW, kiwi can be tinted by
It's probably the lawyer in me, but 1. don't give cash, 2. don't give a post
dated check...he needs to show some trust in you, and 3. don't trust him not to
peddle your offer. period. a contract is a contract.
The deal is with you or there is no deal. sorry, but I have seen a 1000 go bad.
Bil
Honestly, I would not let the seller peddle your offer to the other buyer.
Tell seller if he accepts your offer you expect to hold him to it. If he feels
he needs to give other buyer a last shot, he should say to him, sign a contract
or I am moving on to next in line...
Bill Walker
On Frida
Dennis has given best advice...go to Fibreglast website, rent the color books,
pick the closest or a little darker and let them tint for you...
The sun and weather are different everywhere...hoe the finish has been cared
fortoo many variables on a 30+ year old finish to just assume it will
I believe this is an April Fool waste of time..
Bill Walker
Bill Walker
On Monday, April 1, 2019 Della Barba, Joe via CnC-List
wrote:
I am more than a little confused here. Who is your insurance carrier? Why would
they take some random internet person’s word for a boat’s value over an
accr
Lake Michigan phrf limits whisker pole to J...
Bill Walker
Pentwater, No
C&C 36
Bill Walker
On Wednesday, March 20, 2019 David Knecht via CnC-List
wrote:
LP is 21’ on my boat and the pole is 12-18’ so this should be a non-issue. I
don’t remember seeing a rule on this in Sailing Instructions
Kiwi can be tinted by any paint shop...home depot, Lowe's, etc...and a few
years ago kiwi would give a guarantee...happy or replace.
Did my cockpit sole 5 years ago, still looks like original I think...get a
handful of color cards and match yours,take kiwi to home depot and you will be
happy...
On 3/9/2019 12:32 PM, WILLIAM WALKER via CnC-List wrote:
Don,
Isn't the use of rubber bands on spinnakers, or yarn, or anything that goes
overboard intentionally during a race, banned by Rule 55 of RRS?
That's what I have read and been told.
Bill Walker
C&C 36
Pent
Don,
Isn't the use of rubber bands on spinnakers, or yarn, or anything that goes
overboard intentionally during a race, banned by Rule 55 of RRS?
That's what I have read and been told.
Bill Walker
C&C 36
Pentwater, Mi
Bill Walker
On Saturday, March 9, 2019 Don Kern via CnC-List wrot
my 42 Custom, and I can’t point with Bill until the wind’s blowing over 12
and even then he gives me fits. There are one or two points of sail that my
boat excels against the 39; otherwise, I’m usually toast on corrected (and
sometimes boat for boat). From: WILLIAM WALKER via CnC-List Sent
Well, my region representative for Lake Michigan phrf says that they are
collecting data on a number of things that do not affect phrf, why he doesn't
know, but rudder stock is one. He says that lmphrf is taking a hard look at
several C&C models, the 39 being one..
I told him I guessed that mi
Thanks all for your replies..i guess it will have to wait until spring as I am
426 miles away from boat now.
I have no idea why they ask, but they did. I will try to find out their
thinking and let you know. I assume it o.j.us weight but seems trivial.
I answered "hollow tube" and will correct
should have more info.
From: CnC-List On Behalf Of WILLIAM WALKER via
CnC-List
Sent: Friday, March 1, 2019 11:57 AM
To: cnc-list@cnc-list.com
Cc: WILLIAM WALKER
Subject: Stus-List Rudder Shaft Material
Lake Michigan PHRF is asking whether my rudder shaft is solid stainless or
hollow
Lake Michigan PHRF is asking whether my rudder shaft is solid stainless or
hollow stainless. Any one know with sufficient confidence?
1981 C & C 36
Bill Walker
Bill Walker
___
Thanks everyone for supporting this list with your contributions. Each a
Plastic? Stainless? Sorry, I am sure they are great, but I am an OEM kind of
guy...teak.
That said, I made a new set of handrails for my C&C 36 six years ago.
varnished with Minwax spar varnish. Still going strong in northern latitudes.
I think the secret to varnish is to seal all sides, then
I hesitate to comment because of the status on this list of Dennis and others,
whose technical expertise far surpasses mine, but here we go...
My friends think of me as VERY particular about my CnC...
5 years ago my pedestal was looking rough. I decided to paint it. Removed
what I could easily,
Josh, For the places you need to cut headliner you might consider going to Ace hardware or a big box store and looking at their selection of plastic hole plugs first. If you can measure carefully you may be able to use a properly sized hole saw to gain access to nuts on bottom side of deck throu
Just poking you...I own a 36...i think phrf is near or identical to 35mk1...at
least in lake Michigan
Bill Walker CnC 36
Pentwater, Mi.
Bill Walker
On Saturday, December 1, 2018 Russ & Melody via CnC-List
wrote:
Hi Bill,
I didn't think so. The 36 that I was on is a very nice boat to sail,
So Russ,
Is the 36 considered a landfill series?
Bill Walker ___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- h
Ditto soft shackle.. Make your own, good winter evening project...plenty of
videos on line.
CnC 36
Pentwater, Mi.
(Winter Cincinnati, Ohio)
Bill Walker
On Wednesday, November 7, 2018 Richard Bush via CnC-List
wrote:
Edd, I went to the "soft shackle" last year and love it...I have have not ha
Dan,
If you have the correct plug to replace the sensor it isnt risky at all.
Done it many times on every boat I have owned. Just do.it.
Bill Walker
CnC 36
Pentwater, Mi.
Bill Walker
On Thursday, October 11, 2018 Dan via CnC-List wrote:
I had a tech support ticket open with Actisense (the
Halyard restrainer.
Bill Walker
On Wednesday, September 5, 2018 Wade Harrogate via CnC-List
wrote:
Hey Everyone,
I have a small problem, hoping someone has seen before. I recently had a piece
of equipment break or fail at the top of my mast. I am pretty sure it was used
to hold the genoa
Final thought, ordered at about 2:30, Fawcett Marine shipped by 4, arriving
from east coast to.michigam Thursday...what a world we live in.
Bill Walker
On Tuesday, August 28, 2018 WILLIAM WALKER via CnC-List
wrote:
Help! Lost the feeder on headfoil off the mark iii harken furler Sunday
Thanks to everyone. Called Harken and determined that my furler was Mark III,
unit 1 as Dennis suspected. 7.5 inch drum. Feeder is Part #812, again as Dennis
said.
Found at Fawcett Marine for $80 and free shipping.
Thanks to all..wish harken had a better design on this...
Never try to remove a
On Tuesday, August 28, 2018 Dennis C. via CnC-List
wrote:
Bill,
I show the feeder for a Harken MKIII Unit 1 as part 812. Is this same as yours?
The fastener shows as Harken 192.
Mauripro lists it.
https://www.mauriprosailing.com/us/product/XZHAR812.html
Fisheries Supplies says ships in 1
Help! Lost the feeder on headfoil off the mark iii harken furler Sunday after a
race. Part # 962. Can't find a dealer who stocks. Not pre feeder, but part
that goes on extrusion. Several emails out to dealers.
Bill Walker
CnC 36
Pentwater, Mi.
Bill Walker
Google "flex a rail"..something like that?
Bill Walker
CnC 36
Bill Walker
On Friday, August 10, 2018 bushmark4--- via CnC-List
wrote:
Jim, thanks, they don't have it; they suggested the same thing that Russ
did...have slugs put on the boltrope!
Richard
Richard N. Bush Law Offices
2950 B
DENNIS HAS GOOD ADVICE. easy project. If you want to add a liitle something,
notice the top.of handrail.is slightly more narrow than.base, and trim.a little
on the table saw before routing the edges. Makes a lottle more graceful..
BILL Walker
Cnc36
Bill Walker
On Friday, July 27, 2018 D
I hope this is ok to post, I have an 8 year old winter cover for a cnc 36,
professional construction, out of Maritime cotton/polyester fabric. Showing
some wear, but still serviceable. Make me an offer. Weighs about 40 lbs, ship
from.49449 zip code. PM me for picture from last fall when insta
Anyone using Nordac Sails? Comments?
Bill Walker
CnC 36
Pentwater, Mi.
Sent from AOL Mobile Mail___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use P
Outstandingcongratulations..
Sent from AOL Mobile Mail
On Monday, June 25, 2018 Josh Muckley via CnC-List
wrote:
That's awesome! Congrats Dennis!
On Mon, Jun 25, 2018, 10:33 AM Dreuge via CnC-List
wrote:
This past weekend was the Gulfport to Pensacola Race, a 100 NM offshore
sailbo
A great summary of the race and conditions Neil. It was challenging. We too
had equipment issues, with a horizontal tear in our headsail about 5 feet from
the head, and a vertical tear in our race main 2 feet back from mast. both
held on with a little babying through the night. Finished 8th
Find A Fastenal store nearby and take it there. They have everything or will
get it.
Bill Walker
CnC 36
Sent from AOL Mobile Mail
On Wednesday, June 6, 2018 Garry Cross via CnC-List
wrote:
I tried a 1/8 straight punch. It was too big. I could not find a smaller
straight punch. Had to use a
Very cool, I will remember this
Bill Walker
CnC 36
Pentwater, Mi.
Sent from AOL Mobile Mail
On Saturday, June 2, 2018 Dennis C. via CnC-List wrote:
Recently, my furler swivel got inadvertently hoisted to the masthead (sans
sail). Used a simple technique to retrieve it with having to go al
Thanks Paul..I saw the same resources and that is why I only had one new
thermostat...lol. I think now I will disassemble and take a harder look at the
configuration of the thermostat housing.
Bill
Sent from AOL Mobile Mail
On Tuesday, May 29, 2018 Dreuge via CnC-List wrote:
Hi,
The thermo
ater temperature setpoint.
Josh
On Sun, May 27, 2018, 10:41 AM William Walker via CnC-List
wrote:
Josh,
Thanks, but I must have older or newer than that diagram (1981 boat). My
thermostat housing is on top of exhaust manifold, square in shape with 4
distinct chambers, two of which are mach
1 - 100 of 259 matches
Mail list logo
