Re: Stus-List Docking seamanship

2018-07-31 Thread Rod Randow via CnC-List
long dock (sometimes winch cranking is required). For single-handing the helmperson must puzzle out how and where to drop/throw the loop over the cleat. Practice throwing the loop – arms parallel at start but spread wide at release. Not easy with lifelines. Rod Randow C&C 33-1 On Tue, Ju

Re: Stus-List C&C33-1 -- Shift cable attachement at engine stringer

2016-04-15 Thread Rod Randow via CnC-List
yoke because I could not find a replacement. There is more fun at the other end (cockpit) when it’s time to attach and adjust the cable. I disassembled the cable “tubes” from the binnacle to accomplish this. Rod Randow C&C33-1 On Thu, Apr 14, 2016 at 11:51 AM, David Paine via CnC-List <

Re: Stus-List Auto pilot installation

2016-03-28 Thread Rod Randow via CnC-List
On my 1976/77 C&C33 the ST 4000 control head is installed (2001) on the port T bulkhead (similar to the engine control panel on the opposite side). It is mounted as high and aft as quarter berth access will allow. There is a round inspection port next to and aft of the control head. I do occasiona

Re: Stus-List Masthead sheaves replacement

2014-12-05 Thread Rod Randow via CnC-List
years and the bronze/brass bushing is probably worn and no longer round. Rod Randow C&C 33-1 _ bstratton wrote I have a '74 33 3/4tonner. I believe our rigs are very similar if not identical. I just had my m

Stus-List Exhaust hose replacement for 33-1

2014-11-12 Thread Rod Randow via CnC-List
With all the talk about the 3/4 tons and the 33-1, how do you replace the exhaust hose on the 33-1? Have any 33-1 owners had the exhaust hose replaced? I would like to replace the exhaust hose, muffler to transom, on my 33-1. The issue is removing the hose from the “tailpipe” on the reverse tran

Re: Stus-List where to secure spring lines - toe rail cleat stabilization

2013-07-05 Thread Rod Randow
I have some Johnson folding cleats on my C&C 33 toe rails. Due to the shape of our toe rail these cleats have a tendency to wriggle even when tightly bolted. To keep the cleats from “rotating” (any side to side, forward/aft movement) I made some inserts from 1/8 x 1 x 48 aluminum. I cut the aluminu

Re: Stus-List where to secure spring lines -toe rail cleat stabilization

2013-07-05 Thread Rod randow
I have some Johnson folding cleats on my C&C 33 toe rails. Due to the shape of our toe rail these cleats have a tendency to wriggle even when tightly bolted. To keep the cleats from "rotating" (any side to side, forward/aft movement) I made some inserts from 1/8 x 1 x 48 aluminum. I cut the alu

Re: Stus-List Folding/Feathering Prop for 33-1

2012-09-05 Thread Rod randow
Bob, My C&C 33-1 owner's manual (1976) lists props & engines supplied by C&C Yachts as C&C 33Std Atomic four - gas 16x10x1 2blade (fixed or folder) (comes with V-drive 2:1 reduction standard) I have inquired at boat show about folding props for my boat and I believe s