It would be, most of the time. I have seen some manuals where the oil filter
capacity is in addition to the sump capacity. Sent from my T-Mobile 4G LTE
DeviceDoug MountjoyPort Orchard YCPort Orchard, WARebecca Leah1988 LF39
Original message From: Richard Bush Date:
5/16/21
Wouldn't the oil held in the filter be considered part of the total oil
capacity?
Richard
s/v Bushmark4; 1985 C&C 37l Ohio River, mile 584.4
Richard N. Bush Law Offices
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255
-Original Message-
From: Doug M
Diesel engines typically have a larger oil sump than a gas engine of the same
size. That being said. A lot of the time engine manuals list total oil
capacity. What would be added after an overhaul. You could have undrainable oil
left behind, what might be in a cooler, turbo etc. If you change yo
Tom, we have the same experience 4-4.5 quarts max oil change. Ours is a universal 35 and it’s on the same angle. Considering we only use a half tank of diesel a year I can live with a short oil change. Len MitchellS/V Crazy Legs1989 C&C 37+Midland On. Thanks to all of the subscribers that contribut
I have a Yanmar 2GMF which calls for 2 quarts of oil...I use 2 quarts of
oil every change...always do it when the boat is in the water just
before Fall haulout as the oil pan is most likely level. And I use a
larger Napa oil filter than the small Yanmar filter.
But 6 quarts of oilwhat mari
I can't recall exactly but if you asked me how much oil I buy in preps for
an oil change I would have said 6 qts without even thinking about it. I
use a hand vacuum pump but can't recall it's capacity. As I recall it was
the larger of the 2 Moeller models at the time when I bought it. The
suctio
I have a similar issue with our Yanmar 3JH2E.
Curious to see what everyone days,
Bruce
On Sun, May 16, 2021, 8:18 PM Tom Buscaglia via CnC-List <
cnc-list@cnc-list.com> wrote:
> Every time I change oil on Alera I check the engine spec for the Yanmar 3HM35F
> that calls for 5.7 quarts. I have n
Every time I change oil on Alera I check the engine spec for the Yanmar 3HM35F
that calls for 5.7 quarts. I have never been able to get more than 4 quarts
out or in.
I use an electric pump extractor via the dip stick hole. I understand that the
angle of the engine on my 37+ results in the oil
