HI
I have a rarely use STD HORIZON WS45 that appears not to work. I even
connected the masthead unit directly to the connector at the back of the
instrument and nada. Where can I get a competent electronics person to look to
fix it?
Failing that, what instruments are out there that fill the
+1 for Molly Tasker; my new (2-year old) genoa works well, and came just as
ordered.
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI
> On Oct 6, 2018, at 8:44 PM, Rick Brass via CnC-List
> wrote:
>
> Edd;
>
> I bought a 135 genoa for my 38 from Rolly Ta
Bruce,
I had a slow leak which I could by looking at coolant stains on the absorbent
pad kept under the engine. It is possible that your leak is slow enough that
the coolant evaporates before getting to the bilge.
To find mine, I used an ultraviolet flashlight
https://smile.amazon.com/g
Before the pressure tests, etc. suggested by Josh, check/replace radiator cap.
Gasket on it may be leaking or spring may be tired after many years of life and
lots of engine time.
Charlie Nelson
1995 C&C 36XL/kcb
Water Phantom
Sent from AOL Mobile Mail
Get the new AOL app: mail.mobile.aol.com
Buy/rent a coolant pressure tester. They attach to the radiator where the
cap screws on.
Do you have a water heater that is heated by the engine? I do and my
fittings weep a small amount.
Check for leaks in the engine heat exchanger tubes and heads. Disconnect
the inlet and outlet seawater hos
Hello all,
1 have a 1994 C&C 37/40+ with a Yanmar 3JH2E engine. When I changed the
coolant last year, it seemed like about 12 oz less coolant went back in. Since
then. I've noticed the overflow tank seems to be dropping a little, and I've
topped it off 3 or 4 times. In total, I've probably a
John,
I have been a fan of Aurora Marine products for years. Richard Kittar
used to contribute to the list. They make a couple of stainless cleaning
and polishing chemicals, Quick Silver is a cleaner that supposedly
re-passivates the stainless and Stainless Shield polish.
I have used Aurora
This month’s Cruising World has an awesome photo of a 30? (It could be a
27-29)I’m surprised no one has mentioned it, (unless I’m the only one still
reading it)
Richard
Sent from my iPhone
> On Oct 7, 2018, at 12:36 PM, Dennis Peters via CnC-List
> wrote:
>
> Hi,
>
> We suffered qu
https://www.kijiji.ca/v-sailboat/city-of-toronto/c-c-27-sailboat-maltese-falcon/1357986957
DonV34CC 29 1CC 24
On Sunday, October 7, 2018, 6:36 PM, Dennis Peters via CnC-List
wrote:
Hi,
We suffered quite a bit of damage due to a hard collision this season, so I’m
trying to source parts to
Hi,
We suffered quite a bit of damage due to a hard collision this season, so I’m
trying to source parts to repair. One that I haven’t been able to source is the
cast aluminum fairlead for the starboard quarter.
Here’s a few pics, including a couple of the port version, which isn’t broken.
ht
Dennis,
Have you tried Nevr-Dull? I use it on both my boat stainless and on the
chrome on my motorcycle.
Doug
>
>>
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions. Each
> and every one is greatly appreciated. If you wan
FLITZ is what I use and it works great! It even leaves a waxy residue to
protect the stainless
Bob
Bob Boyer
s/v Rainy Days
C&C Landfall 38 (Hull # 230)
(Presently in Baltimore for the summer)
blog: dainyrays.blogspot.com
email: dainyr...@icloud.com
> On Oct 6, 2018, at 10:59 PM, John Conk
I’ve had GREAT success with Krazy Kloth —
Krazy Kloth (Large Size) by Cadie
https://www.amazon.com/dp/B00D0SY6BS/ref=cm_sw_r_cp_api_dJDUBbWGFHNPE
If your stainless, metal, etc. is really stained, you may want to get more than
one to finish the whole job.
I’ve also heard, but have yet to try,
13 matches
Mail list logo
