cnc-list@cnc-list.com

2017-11-17 Thread schiller via CnC-List
From somebody who has lost a rig.  Of all of the things we spend our money on, the rig is one where spending the money on a rigger makes sense.  It is no fun to be bobbing a mile off shore trying to collect rigging and sails in three foot waves, afraid to engage the motor for fear of tangling i

cnc-list@cnc-list.com

2017-11-17 Thread bobmor99 . via CnC-List
Thank you for the replies. After some research it looks like I should use double jaw toggles to connect the eyes of the new shrouds to the eyes in the existing shroud plates. http://hayn.com/marine/rigging/tj.html#djt On Fri, Nov 17, 2017 at 6:41 PM, Josh Muckley via CnC-List < cnc-list@cnc-list

cnc-list@cnc-list.com

2017-11-17 Thread Josh Muckley via CnC-List
Yeah I kinda misinterpreted the description. The swadged end fittings should be properly attached to a tang which could then be through bolted to the mast. On Fri, Nov 17, 2017, 8:10 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > You can’t run a bolt through the eye on the en

Re: Stus-List Bimini for C&C 30 MKI

2017-11-17 Thread Della Barba, Joe via CnC-List
Did you mean Genco? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mike Casey via CnC-List Sent: Friday, November 17, 2017 4:52 PM To: cnc-list@cnc-list.com Cc: Mike Casey Subject: Stus-List Bimini for C&C 30 MKI Hi folks, I see some threads on this. If you have one from enc

Stus-List Bimini for C&C 30 MKI

2017-11-17 Thread Mike Casey via CnC-List
Hi folks, I see some threads on this. If you have one from enco, are you happy with the results? Thanks, Mike Casey C&C 30 1980 #636 Virus-free. www.avg.com

Stus-List My email

2017-11-17 Thread Mike Casey via CnC-List
islandpacketrac...@gmail.com Virus-free. www.avg.com <#DAB4FAD8-2DD7-40B

cnc-list@cnc-list.com

2017-11-17 Thread Della Barba, Joe via CnC-List
Or it would flatten the eye to the mast and the shroud would be coming out of the eye fitting at an angle. Either way will fail. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Friday, November 17, 2017 8:09 AM To: 'cnc-list@cnc-list.com' Cc

cnc-list@cnc-list.com

2017-11-17 Thread Della Barba, Joe via CnC-List
You can't run a bolt through the eye on the end of a shroud. The tangs line up the direction of pull, a bolt would be getting pulled on at an angle trying to yank the head/nut off from one side. Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Neil Gallagher via Cn