Re: Stus-List New foredeck hatch

Wal and JIm I'll try the router first.  Template taped underneath the hole to guide the trim bit, frame of 1x4s on top of the deck to provide a flat surface for the router base. That should keep it under control. Did the very rough cut with the jig saw already.  Very solid deck with a glass cor

Re: Stus-List New foredeck hatch

Maybe some scrap wood and clamps would help the router stay under control. Else I'd use a sabre saw to trace the outline. Carbonite bits cut through fiberglass well. Good caulk fixes many minor errors. Sorry if someone else already said this... I'm about 145 emails behind. Wal On 3/27/2015

Stus-List Viking 34 for sale on Lake Ontario (Toronto)

A good friend at the yacht club is selling his boat for health reasons. This boat has been well maintained and I promised to put it on the cnc-list for him. Boat is on the hard and it was surveyed last year. Contact the owner direct via the email at the bottom of the post. Details are as fol

Re: Stus-List running wire for chart plotter etc

I've also got a bunch of wires running through my pedestal guard - Ray E7 cable (the big one), NMEA 2000, autopilot, 12 volt. It is MUCH easier if you have a helper on one end to grab/guide the wires. There is a small bulkhead just behind the guard, so it is easy to put terminal strips there. T

Re: Stus-List running wire for chart plotter etc

I changed to a more robust pedestal guard and installed extra wiring for eventual needs. Made sense to me. -Original Message- From: "Jean-Francois J Rivard via CnC-List" Sent: ‎2015-‎03-‎31 1:08 PM To: "cnc-list@cnc-list.com" Cc: "lumg...@hotmail.com" Subject: Stus-List running wire f

Re: Stus-List running wire for chart plotter etc

Ron, When you ran your wires through your pedestal guard, where did they come out and where did you run them from there? All the best, Edd Edd M. Schillay Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log

Re: Stus-List Raymarine wind mast unit. ..

The sticky but working MHU might be repairable. There are kits available: http://www.ebay.ca/itm/Raymarine-Autohelm-ST50-Wind-Vane-Bearings-O-Rings-/390530744370 That will do the ST50 units with black ends, some of the ST60 units. The bearings are available separately, NMB DDR-830ZZRA1P25LY121.

Re: Stus-List running wire for chart plotter etc

Brad, My boat has a Raymarine chart plotter in a NavPod enclosure. The NavPod bolts directly to an Edson pedestal guard. All wiring runs through the pedestal guard and directly into the Chartplotter. There is quite a bit of stuff in the pedestal guard's tubing including power for the chart plot

Re: Stus-List Wheelpilot ST-4000 bracket...

Spencer, Judging from your email, you do not have the 4000 anymore? I still have mine and would love to buy any extras you may still have for the 4000. I do not need the bracket however. An upgraded pilot would be nice for our boat, but a baby is on the way (in 2 weeks) and I am hoping to upgrade

Stus-List running wire for chart plotter etc

Hi Brad, I ran all the wires through the pedestal when I installed the Zeus and there was plenty of space in the pedestal / holes at the bottom to run the wires. Like you I already had power and other wheelpilot related wiring in addition to the NMEA2000 backbone and power for the Zeus.. No

Re: Stus-List running wire for chart plotter etc

Brad, Try Edsonmarine.com. http://www.edsonmarine.com/support/customer_service/index.php They have cataloges, tech manuals and videos. Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md - Original Message - From: "Bradley Lumgair via CnC-List" To: cnc-list@cnc-list.com