Graham,
Girlfriends grandmother was there, but recently passed. 99 yrs old she had a
good run and was ready. Florence Chisholm.
All have a patient who managed the facility - she saw some photos I had taken
around the province in my clinic and asked if they could get copies. In the end
they have
If the valves all move that is great. What sort are they? The issue I
had was that mine are the tapered plug type, and a couple were worn
enough that they leaked. The temporary fix was to put a grease fitting
on the drain plug holes and crank some grease in, the longer term fix
was to re-mach
Absolutely - your work is much appreciated
John and Maryann
Legacy III
1982 C&C 34
Noank, CT
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della
Barba, Joe via CnC-List
Sent: Friday, May 02, 2014 12:28 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List thanks for
Stu,
Lighten up! You need to get out more!!!
sam :-)
From: cnc-list@cnc-list.com
Sent: Friday, May 02, 2014 5:19 PM
To: cnc-list@cnc-list.com
Okay, so we had problems, lots of emails sent out (none were spam), people got
upset and some actually left the list.
T
Calypso’s new backing plates (replacing 43 year old aluminum) are 2 layers of
.030 epoxy board with a thick layer of glass cloth and epoxy in the middle.
They sand and paint like fiberglass and will not corrode. We are filling and
back drilling the hardware mounting holes so the risk of crushi
Okay, so we had problems, lots of emails sent out (none were spam), people got
upset and some actually left the list.
The list problems were not ours but that of other ISP’s trying to provide some
kind of security that did not work for everyone.
We are working on keeping this list active and ho
“All I ask is a tall ship, and a star to steer her by…”
Captain Kirk, in the TOS episode The Ultimate Computer, quoting John Masefield.
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
On May 2, 2014, at 6:03 PM, Chuck S via CnC-List wrote:
> D
Hi Edd,
Had to check Wikipedia:
The original series was so unique and ground breaking but on air for only 3
years and was cancelled in 1969 before we landed men on the moon, then it went
into reruns.
The next generation version ran for 7 years, 1987 to 1994 w Patrick Stewart as
a more Hornbl
I get a digest and the top of each email looks like this:
Subject: CnC-List Digest, Vol 100, Issue 6
To: cnc-list@cnc-list.com
From: via CnC-List
Send CnC-List mailing list submissions to
cnc-list@cnc-list.com
To subscribe or unsubscribe via the World Wide Web, visit
http://cnc
Unfortunately, she died of a heart attack in 1998:
http://en.wikipedia.org/wiki/Persis_Khambatta
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
On May 2, 2014, at 5:41 PM, Rick Brass via CnC-List
wrote:
> Now you have me wondering whatever h
Now you have me wondering whatever happened to Perses
Kimbata.
Interesting theory. Wonder if you could do a script treatment about getting
Kirk and Piccard together again to go back in time to eliminate the Borg, and
then sell the script for enough money to buy a 60 foot C&C?
See, the discussi
I was thinking the same thing.
Hopefully its in good shape. Not expecting I'd want to try and change it out my
first time while its in the water! But a quick haul is not that bad.
And I've wondered about the thru hull valves - exercised them all back and
forth a few times. They 'seem' OK, and t
I like it. Sounds very strong. You could also paint the aluminum backing plates
to match the interior?
Chuck
Resolute
1990 C&C 34R
Atlantic City, NJ
- Original Message -
From: "CNC boat owners, cnc-list"
To: "CNC boat owners, cnc-list"
Sent: Friday, May 2, 2014 6:11:58 PM
Su
Hi Mark,
I used to store my boat an hour away for 7 winters. More recently I kept her
closer, 30 minutes away, but it's the same amount of work. If you have
everything with you, it goes well. Make a list of what you want to do, be
flexible, have plan B and C as you may be fighting over power an
Rick,
That's right.
But for me, it's wrong generation, wrong quadrant. I'm a Kirk-era fan. Those
Borg things belong in the 24th Century.
That is, unless you think (like some do) that the Borg were created when Will
Decker merged with V'Ger at the end of the first movie.
All the best,
Just thought I'd share my current project.
I'm repairing a boat with a ripped off cabin top winch. The winch was
mounted on a pad molded in the deck. Molded in the deck under the pad was
an aluminum disc. The winch fasteners were tapped into the disc. The
cabin liner was immediately under that
I'd leave it alone without reason to change it. My boat had been on the
hard a while before launch, stuffing box was fine. The valves on the
thru-hulls on the other hand
Graham Collins
Secret Plans
C&C 35-III #11
On 2014-05-02 3:15 PM, M Bod via CnC-List wrote:
This spring is challengin
This entire discussion is giving me Hives… :^)
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
On May 2, 2014, at 4:02 PM, Rick Brass via CnC-List
wrote:
> That is "Borg Collective Vessel 34J51"... Though wouldn't all Borg Collective
> ship
That is "Borg Collective Vessel 34J51"... Though wouldn't all Borg Collective
ships operate as one entity?
Right generation, wrong quadrant.
Right, Edd?
Rick Brass
Sent from my iPad
> On May 2, 2014, at 13:57, "Dennis C. via CnC-List"
> wrote:
>
> We are the "listers". You will be assimil
Derek,
Cracks on the hull/keel joint are a frequent topic on the list. There are
lots of ways to deal with it. One thing we all agree on is the need to
properly torque the keel bolts. The specs can be found in the "Technical
Info" section of the C&C photo album.
The next thing you need to ask
-- next part --
An HTML attachment was scrubbed...
URL: <
http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20140502/e39816e0/attachment-0001.html
>
Tom Buscaglia
SV Alera
C&C 37
I would suspect that it is a bit dry. On the other hand, it has to be dry
after 6 months on the hard (each winter).
The only problem I see is that if there is a problem you would have to haul
it out.
Marek (in Ottawa)
-Original Message-
From: M Bod via CnC-List
Sent: Friday, May 02
"For minor fairing you can use AwlFair or 3M Premium Filler. For deeper spots
start with 3M High Strength Filler then smooth with the lighter fillers."
I also have some cracking on the trailing edges near the keel/hull joint.
I'm thinking I should dig it out and re-fair it. I was reading a blog i
If it ain't broke don't fix it. Are you sure it needs attention?
-Original Message-
From: "M Bod via CnC-List"
Sent: 2014-05-02 2:15 PM
To: "C&C list"
Subject: Stus-List Spring prep
This spring is challenging - the weather is just starting to warm up. Hopefully
this weekend I can
This spring is challenging - the weather is just starting to warm up. Hopefully
this weekend I can strip off the boat cover, get the boat paint done, quick
polish/wax topsides and do some initial interior cleaning on the new boat.
Target is to splash Friday next week. Bit of a challenge because
m]
>> On Behalf Of william drose via CnC-List
>> Sent: Friday, May 02, 2014 8:28 AM
>> To: cnc-list@cnc-list.com
>> Subject: Stus-List list
>>
>> Hi, I do not want to receive ALL these e-mails, please stop sending them.
>> Thanks.
>> -- nex
illiam drose via CnC-List
> Sent: Friday, May 02, 2014 8:28 AM
> To: cnc-list@cnc-list.com
> Subject: Stus-List list
>
> Hi, I do not want to receive ALL these e-mails, please stop sending them.
> Thanks.
> -- next part --
> An HTML attachment was scrub
HTML attachment was scrubbed...
URL:
<http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20140502/e39816e0/attachment-0001.html>
Tom Buscaglia
SV Alera
C&C 37+/40
Vashon Island WA
(206) 463-9200
www.sv-alera.com
___
Thi
Yes - thanks!
Joe Della Barba
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of George Cone
via CnC-List
Sent: Friday, May 02, 2014 10:52 AM
To: cnc-list@cnc-list.com
Subject: Stus-List thanks for all your effort
Stu,
I manage numerous sites and locations so I know the
Stu,
I manage numerous sites and locations so I know the amount of effort this
takes. I want to make sure you know the pleasure (and value) I get from this
site . thanks for all your help
George Cone
C &C 40 - LaVida
___
This List is provided by th
Perhaps every third email will do?
Joe Della Barba
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of william
drose via CnC-List
Sent: Friday, May 02, 2014 8:28 AM
To: cnc-list@cnc-list.com
Subject: Stus-List list
Hi, I do not want to receive ALL these e-mails, please sto
Hi, I do not want to receive ALL these e-mails, please stop sending them.
Thanks.
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
32 matches
Mail list logo
