A few more pictures of the progressMIRAGE PicturesHarryMIRAGE
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
I'd like to say there is a good story, but the name Fury came with boat.
Since it's done with special paint that changes colors as you walk by, I
couldn't change it.
Fred
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Lee
Youngblood
Sent: Friday, Mar
My J24 (and all others) lift from a single point, but there's a bar
that spans 2 keel bolts and we put a shackle around that bar.
Presumably you could rig a similar arrangement on a C&C 24.
It's a lot simpler than using slings...
Cheers
Colin
On 3/26/13, ok wrote:
> Wondering if anyone has mod
FWIW, Poly Glow is not recommended for deck. Purely the hull between waterline
and toerail.
PoliGlow doesn't standup to foot traffic.
Chuck
Resolute
1990 C&C 34R
Atlantic City, NJ
- Original Message -
From: "Persuasion"
To: cnc-list@cnc-list.com
Sent: Friday, March 29, 2013 4:07
Gary,
I gotta know the story regarding a "boat partner's husband"?
Chuck
Resolute
1990 C&C 34R
Atlantic City, NJ
- Original Message -
From: "Gary Nylander"
To: cnc-list@cnc-list.com
Sent: Friday, March 29, 2013 4:31:22 PM
Subject: Re: Stus-List Poly Glo removal
Try Zep Heavy
We had no luck with poly prep.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
-Original Message-
From: Colin Kilgour
Sent: Friday, March 29, 2013 5:14 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Poly Glo removal
Polyprep works too...
On 3/29/13, Gary Nylander wrote:
Try Zep
Fred,
I'm afraid to ask, but someone will, is that how you got your current
boat name?
Speaking of Admiral approved names, my wife suggested I name the
boat The Other Woman, because I was spending so much time with her.
Fred Hazzard
S/V Fury
--
___
Polyprep works too...
On 3/29/13, Gary Nylander wrote:
> Try Zep Heavy Duty Floor Stripper - concentrate - from Lowe's. Dilute it (or
> do as my boat partner's husband did and lay it on full strength - wow, it's
> strong). Wear gloves and be careful.
>
> Gary Nylander
> Penniless
> Maryland
>
>
Right, we also saw it in Schooner Cove on another trip. Went to a neat English Pub from Schooner Cove. Had to get a taxi but well worth the effort. Sam sam :-) 403-61
Try Zep Heavy Duty Floor Stripper - concentrate - from Lowe's. Dilute it (or do
as my boat partner's husband did and lay it on full strength - wow, it's
strong). Wear gloves and be careful.
Gary Nylander
Penniless
Maryland
- Original Message -
From: Fred Hazzard
To: cnc-list@cn
Sam,
You are correct:
http://amazinggrace45.shawwebspace.ca/
I believe one of "Gracie's" crew owns a C&C on Vancouver Island and is active
on this email list.
The web site details Amazing Grace's participation in the Van Isle 360 race. I
heard a rumor they are thinking of another round trip
Quite right Sam,
She's my racing ride, sails out of Schooner Cove YC. Her full name is
Amazing Grace V ...(five)
I do tactical, main, nav (we should be okay) and first mate (watch
capt, or whatever the current term is these days for a skipper's
back-up:). Also a lot of trim bitching and trying
Somebody will correct me if I'm wrong but I'm pretty sure "Amazing Grace" is still racing on the west coast. I was in the Swiftsure a couple of years ago and I'm pretty sure she was tied up quite close to us in Victoria. Sam Salter C&C 26 Liquorice Ghost Lake Alberta
Fred
I word of caution. If you use oven cleaner to remove Poly Glo from your deck
be careful oven cleaner is caustic and can burn. When we remove it from our
deck the Admiral was on her hands and knees scrubbing and receive a serious
chemical burn. Yes yes I was there too but I was using a s
Wow, that was excellent.
I really liked the shots of Amazing Grace and Red Jacket.
Rick Taillieu
Nemesis
'75 C&C 25 #371
Shearwater Yacht Club
Halifax, NS.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts
Sent: March-29-13 1:03 PM
To: 1 CnC List
Su
I also used a local Fast Signs. I had a custom logo artwork electronically.
For a nominal fee they tweaked it, converted it to several formats and gave me
a copy.
Nice thing about using them is the logo is scalable. 56 inches for the boat,
26 inches for the truck. When I had Touche' painted
Here is a link to a reasonably simple one (from our Club’s library):
http://nsc.ca/nsc_library/boatname.htm
a much more elaborate one (with explanations!), can be found here:
http://caribbean-pirates.com/naming_and_denaming_a_ship.php
enjoy
Marek___
Sam,
Contrary to Poly Glo recommendations I used Poly Glo on the decks. Over
time the Poly Glo became stained with air pollution and looked quite bad.
Thus, my need to remove it.
Fred
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
sam.c.sal...@gmail.com
Sent: Fri
Fred,Why did you give up on Poly Glow? I was thinking about trying it!Sam Salter C&C 26 Liquorice Ghost Lake Alberta sam :-) 403-617-6280
Terry
When we purchased Persuasion the name was painted on and we used Easy Off oven
cleaner for that job too. We did not sand but if I remember correctly we used
a polishing compound. What was interesting was that the gel coat appeared to
be thicker where a paint was. I chalked it up to UV
The active ingredient in the stripper for PolyGlow and Newglass is ammonium
hydroxide.
As a tip from a friend who works at a boatyard, I learned that they use
"Purple Power" purchased from the automotive section at Wal-Mart for $2.98 a
gallon instead of the PolyGlow stripper, which is somethin
When you use easy-off to remove boat name lettering, is there any sanding
required when the lettering is paint?
...Terry
From: Persuasion
Sent: Friday, March 29, 2013 9:42 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Fw: Poly Glo removal
Fred
When I gave up on PolyGlo we used Easy Off ove
Ammonia based solutions are less caustic and have been effective for me.
mfair
Cio Cio San
Padanaram, MA
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Persuasion
Sent: Friday, March 29, 2013 12:43 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Fw: Poly Glo removal
Fred
W
Fred
When I gave up on PolyGlo we used Easy Off oven cleaner to remove it completely.
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
From: Fred Hazzard
Sent: Friday, March 29, 2013 12:19 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Poly Glo removal
I am needing to remove stained Poly Glo.
Speaking of Admiral approved names, my wife suggested I name the boat The
Other Woman, because I was spending so much time with her.
Fred Hazzard
S/V Fury
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ &
Melody
Sent: Friday, March 29, 2013 9:11 AM
To: cnc-list@cnc
I am needing to remove stained Poly Glo. I have some liquid to remove it,
but if I need more I recall that someone on our list gave a homemade
solution.
Any suggestions what I should use?
Fred Hazzard
S/V Fury
C&C 44
Portland Or
___
This L
Hi Steve,
We renamed the boat because the Admiral didn't like the PO choice of
First Love.
We used sweet grass (for obvious reasons) from the prairie's for the
bow smudge. It smokes for quite awhile and smells like good old pot
(so I'm told...) anyhow, we were in the cockpit enjoying the las
http://www.youtube.com/watch?feature=player_embedded&v=6PxtfdXvfAE#!
There are a lot of C&C's in this (unfortunately poor) video, may be of
special interest to those who own some of the boats shown.
--
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
__
Hi Sam,
The R/C & Muslim guys' god is not dead, she is on a sabbatical :)
I am sure Neptune and the fellows are around and they still have that
ol' sense of humour. Try doing something stupid out there and find
out for yourself.
Cheers, Russ
I agree that you don't need to toss the
I had a local Fastsigns franchise do mine. If you're design-savvy and can use
some sort of program like Illustrator, you can send them an EPS file, and their
computer-controlled vinyl cutters will give you back exactly what you sent in.
One other trick I used: when I purchased and renamed my bo
I just did a name change last year.
Thankfully the previous owner used decals, they were easy to take off.
The bigger issue was cleaning down (white) gelcoat enough to remove shadows.
One very nice tip I'm sure I saw here on the list group was to have an auto
signage place make up the decals - 1/2
Chuck,
congrats and welcome!
For portlights, use cast acrylic. Mine are bronze color, but yours may be
different. For adhesive, the choices are Dow 795, Silpruf and a Sikaflex.
The first two are cheap and require no special tools.
Joel
35/3
Annapolis
On Fri, Mar 29, 2013 at 10:14 AM, Chuck S
Good morning...from what might actually be a spring morning in
Michigan...we'll see.
Have a 35-3 that I just purchased in the northern Michigan area, and need
to replace the name...the topsides are Awlgripped and name has painted
letters. Will the Awlgrip survive the toilet bowl cleaner? (Can't b
Yes, sodium Hydroxide, = Lye.
Either one will eat holes in your hand, but I used the easy off on my boats
name, worked well.
Bill Coleman
C&C 39 animated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of dwight
veinot
Sent: Friday, March 29, 2013 4:05 AM
To: cnc-
Is there hydrochloric acid in the oven cleaner? I thought sodium hydroxide
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts
Sent: March 29, 2013 2:31 AM
To: 1 CnC List
Subject: Re: St
35 matches
Mail list logo
