[c-nsp] BGP Routes

Greetings I have two ASR9K connected to different providers (Uplinks). I am receiving around 90K routes from each provider , as well , I have iBGP between the ASR9K. What am noticing is that ASR9K1 is advertising around 87K to ASR9K2 where ASR9Ks is advertising around 7K routes. Any hints? __

Re: [c-nsp] BGP Routes

@puck.nether.net Subject: Re: [c-nsp] BGP Routes On 3/12/23 20:21, Mohammad Khalil via cisco-nsp wrote: > Greetings > I have two ASR9K connected to different providers (Uplinks). > I am receiving around 90K routes from each provider , as well , I have iBGP > between the ASR9

Re: [c-nsp] BGP Routes

Thanks Saku and Gert for the kind replies , well received. From: cisco-nsp on behalf of Gert Doering via cisco-nsp Sent: Sunday, March 12, 2023 9:58 PM To: Saku Ytti Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] BGP Routes Hi, On Sun, Mar 12, 2023 at 08:

[c-nsp] BGP Extended Communities

Greetings Hope all is well. I need to check if Juniper's BGP extended community settings are compatible with Cisco's BGP extended community settings. Is it possible to intercommunicate Juniper's BGP extended community with Cisco BGP extended community ? Defining BGP Extended Communities for Use

[c-nsp] Midpoint RSVP LSP stats

Greetings I am looking for similar command to obtain forwarding information at the midpoint (no te interfaces) https://www.juniper.net/documentation/us/en/software/junos/mpls/topics/ref/command/show-mpls-lsp.html This is on NCS5500 therefore “traffic collector” is not supported. ___

[c-nsp] Pnet XRV 6.6.2

Greetings I have uploaded image xrv 6.2.2 on pnet for a lab environment and the image booted successfuly. However , I am not able to ping any connected neighbor on any interface though all interfaces are up/up. Interface IP-Address Status Protocol Vrf-Name Loopb

Re: [c-nsp] Pnet XRV 6.6.2

It was interface mapping issue , G0/0/0/0 is actually G0/0/0/2 Thanks everyone. From: cisco-nsp on behalf of Mohammad Khalil via cisco-nsp Sent: Wednesday, December 27, 2023 3:42 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] Pnet XRV 6.6.2 Greetings I have

[c-nsp] C2C ASR9K

Greetings I am trying to configure C2C with BGP as the PE-CE routing protocol and Static as the C to CE routing protocol. The main issue am running now is the eBGP session (VPNv4) between the CEs , routes are delivered but there is no connectivity and hence the eBGP session is not coming up. Per

Re: [c-nsp] C2C ASR9K

-source on both CE2 and CE7. For instance on CE2: neighbor 10.1.100.7 update-source lo0 Regards, Harold De : cisco-nsp de la part de Mohammad Khalil via cisco-nsp Date : vendredi, 19 janvier 2024 à 06:00 À : cisco-nsp@puck.nether.net Objet : [c-nsp] C2C ASR9K Greetings I am trying

Re: [c-nsp] IOS-XR unsuppressed map BGP

Hello TP is the below what you are looking for? P4-P5 (IOS-IOSXR). route-policy BGP unsuppress-route end-policy router bgp 5 address-family ipv4 unicast network 192.168.64.0/24 network 192.168.65.0/24 aggregate-address 192.168.64.0/23 summary-only ! neighbor 10.1.45.4 remote-as 4

[c-nsp] Login Alarms

Greetings Do Cisco has similar feature to :https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/login-alarms-edit-system.html Appreciated. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.ne

[c-nsp] CFM Configuration

Greetings all I am trying to configure CFM using simple topology with xconnect as L2VPN service. CE1 - PE2 - PE3 - CE7 ethernet cfm ieee ethernet cfm global ethernet cfm traceroute cache ethernet cfm alarm notification all ethernet cfm domain SPCOR_DOMAIN level 7 service EVC_SRVC evc EVC1 mep

[c-nsp] MPLS TE FRR - IOS XR

Greetings I have the below topology for which am trying to deploy MPLS TE FRR (Link protection) on IOS XR. CE1 – PE2 – P3 – PE6 – CE7 ||   |    P4P5  Nothing special about the deployment , static routing running between PE and CE for VRF trans