Quoting Radhakrishnan2 S (radhakrishnan...@tcs.com):
> Where hypervisor would be your Ceph nodes. I.e. you can connect your
> Ceph nodes on L2 or make them part of the L3 setup (more modern way of
> doing it). You can use "ECMP" to add more network capacity when you need
> it. Setting up a BGP EVPN
-"Stefan Kooman" wrote: -
To: "Radhakrishnan2 S"
From: "Stefan Kooman"
Date: 12/31/2019 07:25AM
Cc: ceph-users@lists.ceph.com, "ceph-users"
Subject: Re: [ceph-users] Architecture - Recommendations
"External email. Op
. IT Services
Business Solutions
Consulting
-"Stefan Kooman" wrote: -
To: "Radhakrishnan2 S"
From: "Stefan Kooman"
Date: 12/31/2019 07:41AM
Cc: ceph-users@lists.ceph.com, "ceph-users"
Subject: Re: [ce
Quoting Radhakrishnan2 S (radhakrishnan...@tcs.com):
> In addition, about putting all kinds of disks, putting all drives in
> one box was done for two reasons,
>
> 1. Avoid CPU choking
This depends only on what kind of hardware you select and how you
configure it. You can (if need be) restrict #C
Hi,
>
> Radha: I'm sure we are using BGP EVPN over VXLAN, but all deployments
> are through the infrastructure management network. We are a CSP and
> overlay means tenant network, if ceph nodes are in overlay, then
> multiple tenants will need to be able to communicate to the ceph
> nodes. If LB i
Consulting
-"ceph-users" wrote: -
To: "Stefan Kooman"
From: "Radhakrishnan2 S"
Sent by: "ceph-users"
Date: 12/30/2019 04:16PM
Cc: ceph-users@lists.ceph.com, "ceph-users"
Subject: Re: [ceph-users] Architecture - Recommendati
Services
Business Solutions
Consulting
-"Stefan Kooman" wrote: -
To: "Radhakrishnan2 S"
From: "Stefan Kooman"
Date: 12/27/2019 02:28PM
Cc: ceph-users@lists.ceph.com, "ceph-users"
Subject: Re: [ce
Quoting Radhakrishnan2 S (radhakrishnan...@tcs.com):
> Hello Everyone,
>
> We have a pre-prod Ceph cluster and working towards a production cluster
> deployment. I have the following queries and request all your expert tips,
>
>
> 1. Network architecture - We are looking for a private and pub
Hello Everyone,
We have a pre-prod Ceph cluster and working towards a production cluster
deployment. I have the following queries and request all your expert tips,
1. Network architecture - We are looking for a private and public network,
plan is to have L2 at both the networks. I understand
