On Sat, Sep 12, 2020 at 6:41 PM Adam Thornton via cctalk
wrote:
>
> I got an LK201 recently that was a little damaged in transit. A couple of
> the keycap assemblies and their corresponding leaf springs have come off. I
> can see how the leaf springs fit on the little posts on the keycap
> as
One thing I've tried and seems to work quite well (on another
application) is UV curable plastic. The last thing I fixed was when the
post holding one side of the exit paper tray broke off, and I used the
UV curable plastic to fix it (still working just fine.) The trade name
is Bondic, and I
I picked up a pair (1 set) of these very neat old graphics boards.
Alas I have no idea what they are or if there is hope of using them. One is
a dual
slot 9U VME board that has gobs of video ram all over it, including a board
labeled Z buffer.
The only output are (3) BNC connectors
(R,G, and B) a
> Alas I have no idea what they are or if there is hope of using them.
Megatek built graphics terminals and I think plotters that were used in
CAD shops. Prime used them with some of their CAD offerings. Megatek
also did boards for at least DG, -11, Modcomp systems, maybe others. In
fact, some
This is a VME board with 3D acceleration, and RGB out.
There is no terminal for it.
Sent from NeXTMail
> On Sep 13, 2020, at 13:28, Dennis Boone wrote:
>
>
>>
>> Alas I have no idea what they are or if there is hope of using them.
>
> Megatek built graphics terminals and I think plotters th
On 9/13/20 2:48 PM, null via cctalk wrote:
There is no terminal for it.
Megatek started out making caligraphic displays for DG systems
those evolved into the Wizzard series. I have one with a Unibus
interface.
They switched to raster in the late 70s eventually moving to
standalone 3D color ra
On 9/13/20 3:44 PM, Al Kossow via cctalk wrote:
Like all of the specialized 80's VME boards, it is going to be pretty
much impossible to find software for them today.
You'll note on bitsavers there is almost no documentation on 3rd party VME
boards outside of Motorola. They were so specialize
Hi
I've had a VAX 4000/300 sitting around for the past couple of years. The
second time I tried to switch it on there was a bit pop from the power
supply. The 12v module of the H7874 PSU is completely dead and despite
my best efforts I have not been able to fix it.
Tonight I decided to remove tha
Tony said
> On Sat, Sep 12, 2020 at 6:41 PM Adam Thornton via cctalk
> wrote:
>>
>> I got an LK201 recently that was a little damaged in transit. A couple of
>> the keycap assemblies and their corresponding leaf springs have come off. I
>> can see how the leaf springs fit on the little posts o
At 10:41 AM 12/09/2020 -0700, you wrote:
>I got an LK201 recently that was a little damaged in transit. A couple of the
>keycap assemblies and their corresponding leaf springs have come off. I can
>see how the leaf springs fit on the little posts on the keycap assemblies, and
>I can see where
10 matches
Mail list logo
