Very nice photos although I am confused by some. Some of them appear to
be moving but a lot of stuff stays still. What is happening??
This one for example:
https://photos.google.com/share/AF1QipMxQT03fXAj3rZSF8jUm5IrLnmLnVYTTP_hgiNtZ6z-0-pKjaFeKB3aw1ItxldqKA/photo/AF1QipPyuT8UHx84MIB-PxX5L04jePbF6
On Fri, 3 May 2019 at 10:41, Aaron Jackson via cctalk
wrote:
>
> Very nice photos although I am confused by some. Some of them appear to
> be moving but a lot of stuff stays still. What is happening??
Please bottom-post on the list.
It looks to me like an Apple "live photo".
--
Liam Proven - P
Some you might want, since they go to Link terminals.
http://www.elecshopper.com/nmb-rt8255c-at-keyboard.html
http://www.elecshopper.com/fujitsu-fkb-4700-series-keyboard.html
http://www.elecshopper.com/nmb-rt-101-keyboard-complete.html
http://www.elecshopper.com/link-t27-keyboard.ht
>> It's a CM-2. The problem with most CM-2s - aside not working in 2019 - is
>> most were never fully populated with card cages in all 8 hyper-cubes. That
>> particular machine only has card cages in 2 of the hyper-cubes. The other 6
>> are empty. I'm not sure a machine with max 64K processo
Out of curiosity, how common are Honeywell terminals like would have been used
on a DPS-8?
Zane
I’m not surprised, I’ve not used one since the early 90’s.
Zane
> On May 3, 2019, at 11:05 AM, Electronics Plus wrote:
>
> I have some pics of them, but I no longer have them. Have not seen any in
> years.
>
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org]
I have some pics of them, but I no longer have them. Have not seen any in
years.
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Zane Healy
via cctalk
Sent: Friday, May 03, 2019 1:01 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Honeyw
On 5/1/19 4:11 PM, Al Kossow via cctalk wrote:
> I did decide to get the Wilson Labs RL01 emulator he just listed.
Put up some pics. The electronics weren't at all what I was expecting
http://bitsavers.org/pdf/wilsonLabs/WBC-3000
it has a 1.2gb SCSI drive inside.
I plan to go to Dallas next week for a quick run.
Things I know are there:
IBM XT and AT computers with kbds, no monitors. (3 pallets last I checked)
CASES of NIB 360K internal floppy drives (not diskettes) for the original
IBM PC
Some hdd for the original PCs, new and used
Defective IBM monit
> On May 3, 2019, at 12:13 PM, Al Kossow via cctalk
> wrote:
> On 5/1/19 4:11 PM, Al Kossow via cctalk wrote:
>
>> I did decide to get the Wilson Labs RL01 emulator he just listed.
>
> Put up some pics. The electronics weren't at all what I was expecting
> http://bitsavers.org/pdf/wilsonLabs/WB
I have the opportunity to purchase some old 50-pin SCSI, ESDI, MFM, RLL etc.
drives.
There is no way to test them, and there are no refunds.
There are no dents or obvious signs of damage, but that means noting.
Is there any way to resurrect these if they are dead/defective?
Any interest?
Ci
On Fri, May 03, 2019 at 02:26:41PM -0500, Electronics Plus via cctalk wrote:
> Original DEC things that have orange flippy switches-WARNING! Smells like
> dead rats and rat poop. Nasty condition! Looks something like this
> https://obsolescence.wixsite.com/obsolescence/pidp-11
I'd love to help dri
It is rarely PRACTICAL to repair a dead drive.
If it has important data on it, then repairing or swapping the board is
sometimes done. It is extremely rare that there would be a need
sufficient to justify opening the "bubble".
But, often, drives are identified as being dead or defective, whe
So I called my buddy of 20+ years.
Got old PDP junk left?
Like what kinda junk?
PDP 8 or 11?
Hmm, got PDP 8 boards and BA11 boxes. PDP11 makes no sense, it is a series,
11/70 or what?
I know NOTHING about this stuff. I told him slide in boxes with flippy
switches. He laughed and said he
On 5/3/19 8:02 PM, Sytse van Slooten via cctalk wrote:
It's a CM-2. The problem with most CM-2s - aside not working in 2019 - is most
were never fully populated with card cages in all 8 hyper-cubes. That
particular machine only has card cages in 2 of the hyper-cubes. The other 6
are empty.
Anyone know much about early MIPS workstations? I'm trying to get a
MIPS RS2030 to boot, without much luck so far. It goes through the
selftest but stops with the internal LED display at "5" accompanied by a
continuous beep.
Known problems:
- The Dallas DS1287 battery is flat; I can hack a
On 5/3/19 3:22 PM, Pete Turnbull via cctalk wrote:
> Anyone know much about early MIPS workstations? I'm trying to get a MIPS
> RS2030 to boot, without much luck so far. It
> goes through the selftest but stops with the internal LED display at "5"
> accompanied by a continuous beep.
>
> Kno
On 5/3/19 4:25 PM, Al Kossow via cctalk wrote:
> http://www.geekdot.com/the-mips-rs2030/
>
> someone else had the same problem in the comments
>
>
also, there is a simulation running in mame
if you look at drivers/mips.cpp you'll find the nvram layout
/*
* The following isn't a re
On 5/3/19 4:25 PM, Al Kossow via cctalk wrote:
>> So I'd like to know what the RAM spec really is, whether I need to reprogram
>> the Dallas chip (and if so what goes
>> where), and what the diagnostic numbers on the internal LED mean. Anyone?
>>
I thought I threw them all away, but i just f
On 04/05/2019 01:04, Al Kossow via cctalk wrote:
On 5/3/19 4:25 PM, Al Kossow via cctalk wrote:
So I'd like to know what the RAM spec really is, whether I need to reprogram
the Dallas chip (and if so what goes
where), and what the diagnostic numbers on the internal LED mean. Anyone?
I th
On 5/3/19 5:22 PM, Pete Turnbull via cctalk wrote:
> Thanks - that would be very useful, if you have time and suitable hardware.
> I read the pages at geekdot.com a couple of
> weeks ago, but I'd not seen the MAME data. I did find a manual about the ROM
> on Bitsavers recently, so with that
On 5/3/19 3:22 PM, Pete Turnbull via cctalk wrote:
> Anyone know much about early MIPS workstations?
RISCos 4.52 src, incl monitor src up now under
http://bitsavers.org/bits/MIPS/RISCos
On Fri, May 3, 2019, 7:53 PM Al Kossow via cctalk
wrote:
>
>
> On 5/3/19 3:22 PM, Pete Turnbull via cctalk wrote:
> > Anyone know much about early MIPS workstations?
>
> RISCos 4.52 src, incl monitor src up now under
> http://bitsavers.org/bits/MIPS/RISCos
I have QIC tapes and a 300mb hard dri
Please send along that list when you get it.
=]
--
Anders Nelson
+1 (517) 775-6129
www.erogear.com
On Fri, May 3, 2019 at 4:05 PM Electronics Plus via cctalk <
cctalk@classiccmp.org> wrote:
> So I called my buddy of 20+ years.
>
> Got old PDP junk left?
>
> Like what kinda junk?
>
> PDP 8 or
Found in the shelf in smecc library
- Case study of control data corporation 1958-1967 by Steven Arnold Estrin
B.S.B
a master's thesis - anyone know him or this?
Ed# at SMECC
25 matches
Mail list logo
