I don’t know about the spacing of the holes, but BIVAR has one and two-hole
card pull handles.
https://www.bivar.com/product/cp-pcb-handles/
Datasheet: http://www.bivar.com/parts_content/Datasheets/CP-1and2.pdf
--
Ron Pool
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Vincent
> Slyngstad via cctalk
> Sent: Monday, May 10, 2021 1:16 PM
> To: cctalk@classiccmp.org
> Subject: Re: QBUS/UNIBUS card handles
>
> On 5/10/2021 9:25 AM, Fritz
> how about https://www.essentracomponents.com/en-us/p/pcb-card-pullers
Two thoughts -
* Not sure the mounting hole spacing is correct; the one from Vince's
site looks to be about 2" between centers; the Essentra says 1.25".
It's entirely possible I don't know diddly about DEC card handles
On 5/10/2021 9:25 AM, Fritz Mueller via cctalk wrote:
On May 10, 2021, at 7:14 AM, Joshua Rice via cctalk
wrote:
I would assume it would be trivial to do an injection-moulded run of these
handles...
They might also be ideal for silicone mold / resin cast, for smaller/home
production runs?
On 5/9/21 11:09 PM, Dennis Boone via cctalk wrote:
Folks,
Does anyone have a design for printing card handles for QBUS / UNIBUS
cards?
how about
https://www.essentracomponents.com/en-us/p/pcb-card-pullers
> On May 10, 2021, at 7:14 AM, Joshua Rice via cctalk
> wrote:
> I would assume it would be trivial to do an injection-moulded run of these
> handles...
They might also be ideal for silicone mold / resin cast, for smaller/home
production runs?
On May 10, 2021, at 8:48 AM, Tom Hunter via cctalk
wrote:
Just don't expect it to be as tough as the original.
I would assume it would be trivial to do an injection-moulded run of
these handles, if 3D print schematics are available. They were
definitely well-copied in the hey-day of the
That would depend on which material/printer you use.
paul
> On May 10, 2021, at 8:48 AM, Tom Hunter via cctalk
> wrote:
>
> Just don't expect it to be as tough as the original.
>
>
> On Mon, May 10, 2021 at 3:20 PM Adrian Stoness via cctalk <
> cctalk@classiccmp.org> wrote:
>
>> vin
Just don't expect it to be as tough as the original.
On Mon, May 10, 2021 at 3:20 PM Adrian Stoness via cctalk <
cctalk@classiccmp.org> wrote:
> vince has some onhis site https://so-much-stuff.com/pdp8/cad/3d.php
>
> On Mon, May 10, 2021 at 1:09 AM Dennis Boone via cctalk <
> cctalk@classiccmp.o
vince has some onhis site https://so-much-stuff.com/pdp8/cad/3d.php
On Mon, May 10, 2021 at 1:09 AM Dennis Boone via cctalk <
cctalk@classiccmp.org> wrote:
> Folks,
>
> Does anyone have a design for printing card handles for QBUS / UNIBUS
> cards? It seems a natural application.
>
> Some greppin
> There is an stl file on this page (4th down on the right):
> I had a few of these printed for a Unibone I put together, and they
> came out well.
Fritz,
Perfect, thanks!
De
> On May 9, 2021, at 11:18 PM, Dennis Boone via cctalk
> wrote:
> Does anyone have a design for printing card handles for QBUS / UNIBUS
> cards? It seems a natural application.
There is an stl file on this page (4th down on the right):
https://so-much-stuff.com/pdp8/cad/3d.php
I had a few o
> Does anyone have a design for printing card handles for QBUS / UNIBUS
> cards? It seems a natural application.
I suppose I should be more specific: the plastic kind that are just
handles, also seen on flip chip cards, -8 stuff, whatever. Not
extractor levers or s-box stuff.
TIA,
De
Folks,
Does anyone have a design for printing card handles for QBUS / UNIBUS
cards? It seems a natural application.
Some grepping of the list logs, a brief plonk through the gadawful
thingiverse search, and various googling have produced no existing
designs.
Thanks,
De
14 matches
Mail list logo
