>
> From: cctech on behalf of Marc Howard <
cramc...@gmail.com>
> Sent: Thursday, February 18, 2016 7:40 PM
> To: General Discussion: On-Topic Posts Only
> Subject: How to use both a VT-52 and an ASR-33 on a PDP-8A
>
> Hi,
>
>
> You could use something like an Arduino to buffer
> either. It could take the 9600 from the terminal and
> retransmit it at 110. It would be slow when updating
> data to the terminal but it should be able to buffer human
> input at the terminal.
If you're going to keep the PDP11 port at 110 b
oth a VT-52 and an ASR-33 on a PDP-8A
Hi,
Just looking for suggestions on how best to setup my PDP-8A so that it can
use either a VT-52 (current loop version) or an ASR-33.
One idea I have is a multi-pole switch to change the baud rate from 110 to
9600 and to also switch the xmit and rcv current
Hi,
Just looking for suggestions on how best to setup my PDP-8A so that it can
use either a VT-52 (current loop version) or an ASR-33.
One idea I have is a multi-pole switch to change the baud rate from 110 to
9600 and to also switch the xmit and rcv current loops.
Does anyone out there have any
