talk
Sent: Wednesday, August 28, 2019 4:44 AM
To: cctalk@classiccmp.org
Subject: Re: Decaying foam on PCBs
On 8/27/19 10:38 PM, Chuck Guzis via cctalk wrote:
> I'd probably just use 91% isopropanol. No water to speak of, doesn't
> bother plastics--and cheap.
I do normally use it on b
On 8/27/19 10:38 PM, Chuck Guzis via cctalk wrote:
I'd probably just use 91% isopropanol. No water to speak of, doesn't
bother plastics--and cheap.
I do normally use it on boards for general cleaning - I was just assuming
that this nasty sticky foam would be too much for it. I'll give it a go
On 8/27/19 8:18 PM, David Collins via cctalk wrote:
> In Australia there’s this product ;
>
> https://awareenvironmental.com.au/product/sticky-spot-goo-dissolver/
>
> It’s citrus based but I haven’t had any bad effects on PCBs. It does affect
> some styrene plastics but in general it’s safe and
In Australia there’s this product ;
https://awareenvironmental.com.au/product/sticky-spot-goo-dissolver/
It’s citrus based but I haven’t had any bad effects on PCBs. It does affect
some styrene plastics but in general it’s safe and very effective.
If you aren’t in Aus, a similar citrus based p
I picked up a couple of HP 5036A logic trainers today, both of which have
had goopy decaying foam come into contact on their PCBs. What's effective
at removing it? I've only ever had problems with it in locations where I
can use things such as citrus-based cleaners, but I'm a bit wary of usin
