Thanks Matt, I did have the netrtg040.a file but it was corrupted. The one on
the TU58 tape worked perfectly and I was finally able to install DECnet. The
network does come up but goes right down with a synchronizing error. It's
always something it seems. Should be all set once I get that figure
On 07/03/2019 03:21, BGeezer via cctalk wrote:
> Yes, I can see now that they are different. If I can't find a license
> tape I'll probably put on 5.5 which I have as well. In fact I have
> V1.0 on up. I'm running two Simh instances on each Raspberry Pi all
> clustered and running DECnet and TCP/IP
Yes, I can see now that they are different. If I can't find a license
tape I'll probably put on 5.5 which I have as well. In fact I have V1.0
on up. I'm running two Simh instances on each Raspberry Pi all clustered
and running DECnet and TCP/IP. I was hoping for a large mix of machines
and VMS
Prior to v5.0, VAX/VMS didn’t use LMF, so as Antonio pointed out, you need a
license tape. While I saw these online a few years ago, I didn’t download them
at the time, and they don’t seem to be online anywhere.
Years ago, I got a MicroVAX 3 system running VAX/VMS 4.6 from an RD53. It
booted
Ok, I got a chance to login and try installing DECnet so I could
reproduce the error. This is the result of
trying to install without a license. VMS by itself does not complain.
If you have not already installed the DECnet-VAX license, then do so now.
After the license has been installed, you
/~bqt/hecnet.html
Dave.
> -Original Message-
> From: cctalk On Behalf Of Brian Roth via
> cctalk
> Sent: 06 March 2019 23:08
> To: ClassicCmp
> Subject: DECnet License for older VAX VMS
>
> Hello,I have a current hobbyists license for OpenVMS 7.3 and a handful of
> sim
On 06/03/2019 23:22, Grant Taylor via cctalk wrote:
On 03/06/2019 04:07 PM, Brian Roth via cctalk wrote:
Hello,I have a current hobbyists license for OpenVMS 7.3 and a
handful of simulated VAXen. I wanted to add my simulated 11/780 and
11/782 to my DECnet and wondered if there was a (legal of c
On 03/06/2019 04:07 PM, Brian Roth via cctalk wrote:
Hello,I have a current hobbyists license for OpenVMS 7.3 and a handful
of simulated VAXen. I wanted to add my simulated 11/780 and 11/782 to my
DECnet and wondered if there was a (legal of course) license workaround
to install networking on a
Hello,I have a current hobbyists license for OpenVMS 7.3 and a handful of
simulated VAXen. I wanted to add my simulated 11/780 and 11/782 to my DECnet
and wondered if there was a (legal of course) license workaround to install
networking on an older version such as 4.4. The current PAKS will not
