Most of these BASICs required a delay on a return.
To make it more fun, it got longer the larger the program.
Dwight
From: cctech on behalf of Win Heagy
Sent: Wednesday, January 11, 2017 10:28:06 AM
To: cct...@classiccmp.org
Subject: Re: Boot Loader for 3P+S
Yes, I was able to run the echo characters test from the solivant site
as well as a couple other small upload tests, so I'm thinking it's a
delay issue or a configuration problem with the 3P+S and MITS BASIC.
Digging back into this on my IMSAI, I'm now remembering the
peculiarities of loading MITS
nan
Sent: Tuesday, January 10, 2017 10:30:19 AM
To: General Discussion: On-Topic Posts
Subject: Re: Boot Loader for 3P+S on IMSAI
On Tue, Jan 10, 2017 at 1:30 PM, william degnan
wrote:
>
>
> I believe this image is set to cause the 3P+S to act like a 2SIO card for
> BASIC. NOTE: It
On Tue, Jan 10, 2017 at 1:30 PM, william degnan
wrote:
>
>
> I believe this image is set to cause the 3P+S to act like a 2SIO card for
> BASIC. NOTE: It's set for a 20 mA current loop Teletype. You're not
> using a teletype, so ignore related jumpers (EIA vs. 20mA current
> loop)...the rest sh
On Tue, Jan 10, 2017 at 1:12 PM, Win Heagy wrote:
> Took a little digging but I found the thread where you were talking
> about port 20/21. I was able to configure the 3P+S card and run the
> test from the solivant site successfully, but I'm not able to upload
> basic. I have a couple more thin
Took a little digging but I found the thread where you were talking
about port 20/21. I was able to configure the 3P+S card and run the
test from the solivant site successfully, but I'm not able to upload
basic. I have a couple more things to try, including setting a small
upload delay as Bill su
I believe this image is set to cause the 3P+S to act like a 2SIO card for
BASIC. NOTE: It's set for a 20 mA current loop Teletype. You're not
using a teletype, so ignore related jumpers (EIA vs. 20mA current
loop)...the rest should be correct for what you're trying to do.
b
I have an IMSAI that I am restoring. The basics appear to be working
(front panel, CPU and RAM cards). I have a Processor Tech, 3P+S card
that is next on the list for testing. I have the manual, but the card
was not configured for RS-232...not sure what it was configured for
but it doesn't match
The manual pretty much has the exact config for that port 20 is all you
have to remember
Bill Degnan
twitter: billdeg
vintagecomputer.net
On Jan 6, 2017 7:41 PM, "Win Heagy" wrote:
> I have an IMSAI that I am restoring. The basics appear to be working
> (front panel, CPU and RAM cards). I have
