Looking for MCM68764 and I could probably use some TMS2532 as well.
I'm also always on the lookout for blank bipolar proms (chips stargin
with 82S, and compatables).
Anyone have any of these they don't need. New, used, needing erasing,
doesn't matter.
If you have any, let me know how man
I have 2 Sbus Expansion chassis, one Sun, and one Integrix (IIRC). I
have the expansion chassis and the sbus controllers, but on both cases I
do not have the cables.
By looking at it, I believe they probably both use the same cable.
Anyone out there have one or two cables to spare ?
Thanks
On 2023-03-27 03:03, Steve Lewis via cctalk wrote:
I've come across three original QIC tapes for the IBM 5100. DC300 I
think,
original IBM labels.
They are in fair condition (the tape material itself seems fine, they
are
all on their reels), but the "rubbers" used to actually actuate the
ree
Recently rejoined the list
saw someone mention that site
way too good to be true and with a bit of poking around looks
like most if not all are scraped right from eBay.
One item has the eBay price on the bryanipad.shop site crossed out and
the lower price added.
I spen
If properly care for and stored, I'd be willing to bet that the 5.25"
floppies will be working after the flash replacements suffer bit rot and
data loss from charge depletion though I might not be around to see
that be a big problem :-)
Don't toss your 5.25" floppies though :-) I'l
On 2019-12-04 21:55, rescue wrote:
I have a TRS-80 Model III with a IV upgrade in it (non gate array).
I have a hunch that one or two of the HALs are bad (the primary one
being 8075208).
Anyone have the JED files to program any of these HALs into PALs or
GALs ?
Anyone know a source for
I have a TRS-80 Model III with a IV upgrade in it (non gate array).
I have a hunch that one or two of the HALs are bad (the primary one
being 8075208).
Anyone have the JED files to program any of these HALs into PALs or
GALs ?
Anyone know a source for these ?
Anyone know if these can be
On 2019-11-05 14:00, rescue wrote:
So, on this Model III I'm working on the following keycaps are
missing:
1/! key
right shift key
Still looking for these or a donor model I, III, or IV keyboard.
Looks like keycaps from a Model III, and possibly a model I would
work. Probably a Mod
On 2019-11-07 19:04, rescue wrote:
I have one of these, it has 2 jumper blocks, JPR2 (4 3 pin jumper
'settings'... looks to probably latch each of the 4 high or low) and
JPR3 (12 on/off jumper positions).
It also has a JPR1 which would be a 3 pin header and it is strapped
by wire to po
I have one of these, it has 2 jumper blocks, JPR2 (4 3 pin jumper
'settings'... looks to probably latch each of the 4 high or low) and
JPR3 (12 on/off jumper positions).
It also has a JPR1 which would be a 3 pin header and it is strapped by
wire to position 1-2.
Would love to figure out how
Need a faceplate and the eject control shaft (it is sheared off (the
way I aquired it)) (I do have the eject lever)
I thought I had some floppy drive parts kicking around, but if I do, I
can't find them (and chances are I don't have parts for that specific
drive).
Anyone have a dead d
On 2019-11-05 13:50, rescue wrote:
I haven't dug into this one yet, but I did get it booted in trsdos,
and the letter I on the keyboard wasn't working.
I shut it off, disconnected and removed the keyboard. I desoldered
and removed the APLS switch, opened it up, cleaned up the carb
On 2019-11-05 13:45, rescue wrote:
Been away for some time from the mailing lists getting back into
my classic gear again
I have two of these Qumetrack 542 drives.
While testing my 360K drive collection (8 drives I must be
slacking :-) ...), 2 worked, 4 had issue (resolved with a
I haven't dug into this one yet, but I did get it booted in trsdos, and
the letter I on the keyboard wasn't working.
I shut it off, disconnected and removed the keyboard. I desoldered and
removed the APLS switch, opened it up, cleaned up the carbon pad and the
contacts below it, reassemble
Been away for some time from the mailing lists getting back into
my classic gear again
I have two of these Qumetrack 542 drives.
While testing my 360K drive collection (8 drives I must be slacking
:-) ...), 2 worked, 4 had issue (resolved with a good head cleaning),
and 2 (bot
So, on this Model III I'm working on the following keycaps are missing:
1/! key
right shift key
Looks like keycaps from a Model III, and possibly a model I would work.
Probably a Model IV keycap for 1/! would work, but I think the right
shift key would be different between a Model III and Mo
Been away for some time from the mailing lists getting back into
my classic gear again
I have two of these Qumetrack 542 drives.
While testing my 360K drive collection (8 drives I must be slacking
:-) ...), 2 worked, 4 had issue (resolved with a good head cleaning),
and 2 (bot
On 2016-06-24 22:47, Al Kossow wrote:
On 6/24/16 7:42 PM, Josh Dersch wrote:
A Data-I/O 29A or 29B will do the job nicely.
and a Unipak I or II like this
www.ebay.com/itm/301995688339
I have a Data-I/O Series 22 which could do these, plus another burner
that may do them. I haven't checke
I've been saving the VT52 I've owned for years (used it with a modem
back in the late 80s to dial into school) with the thought of paring it
up with a PDP-8/E, PDP-8/F, or PDP-8/M but I don't know that the
PDP-8 train will ever stop here. I've come close a couple of times, but
have eith
Don't have time to fully check it out, but check out:
http://chrislawson.net/writing/macdaniel/2k1130cl.shtml
On 2016-06-15 17:24, Swift Griggs wrote:
On Wed, 15 Jun 2016, rescue wrote:
Didn't hacked or 3rd party cd-rom drivers exist?
I have some vague memory, but I was thi
Didn't hacked or 3rd party cd-rom drivers exist. That won't handle the
boot problem, but the boot checks might not be as thorough as Disk Setup
???
Plextor CD-ROM SCSI drives used to have a 512 byte block jumper as
well. I don't know about the DVD drives.
On 2016-06-15 16:45, Swift Grig
Verry sorry everyone didn't realize that the reply's were going to
the list... apologies for the noise
-- Curt
On 2016-06-07 13:54, Austin Pass wrote:
On 7 Jun 2016, at 18:35, rescue wrote:
Hi everyone,
I am looking to clean out some of my stuff. I'm 'buri
On 2016-06-07 13:54, Austin Pass wrote:
On 7 Jun 2016, at 18:35, rescue wrote:
Hi everyone,
I am looking to clean out some of my stuff. I'm 'buried' in it.
Qty 4 Canon 24 Color
Where are you located?
-Austin.
I'm in Sharon, MA zip 02067
-- Curt
Hi everyone,
I am looking to clean out some of my stuff. I'm 'buried' in it.
This is just the begnning so if you are looking for anything in
particular; PC, Mac, Sun, SGI, misc, feel free to inquire.
If you want to get heard above the noise when replying (spam sucks),
add PURGE into the
Looking for some Fluke Micro System Troubleshooter stuff:
Looking for the following key caps: AUTO, BUS, RAM SHORT, and C
Bonus key caps (not needed, but better ones would be nice): RAM LONG,
I/O, 1, 2
Also looking for PODS for:
6502
Z80
6809
8080
If you have any of these available, please l
25 matches
Mail list logo
