Hi There friends!
Actually i am not using brltty with linux
I'm using it with the nvda screereader.
So i am using it with windows.
However i ha e a problem getting it to work with my humanware brailliant 64.
I have saved the output log from my atempts:
brltty.exe: unknown configuration directive:
Hello!
I'm not using brltty in linux.
I use it with nvda and i have discovered that the swedish brailletable isn't
really well made.
There are a lot of characters not showing up correctly.
Maybe this has to do with which brailletable i have chocen in the fonf file.
Any thoughts appreciated.
/Anders
] Swedish Brailltable.
Hello,
Anders Holmberg, le Thu 05 Feb 2009 09:49:06 +0100, a écrit :
> I use it with nvda and i have discovered that the swedish brailletable
> isn't really well made. There are a lot of characters not showing up
> correctly.
For dots translation, NVDA do
Hi!
This is a bit off topic but i really don't know where to ask this question
so i Hope i wont be thrown out in the darkness for this one. How does the
cyrsor routing feature work on a braille display? Is it booth hardware and
software involved? The reason for asking is that my windows screenr
23:50
Till: Informal discussion between users and developers of BRLTTY.
Amne: Re: [BRLTTY] Cursor routing.
On 20/04/2009 7:39 AM, Anders Holmberg wrote:
> How does the
> cyrsor routing feature work on a braille display? Is it booth hardware
> and software involved?
Yes. The braille dis
Hi!
For some strange reasons often after a few hours hwn using nvda together
with brltty brltty just terminates and crashes nvda so i have to reboot the
whole computer again. I can do an alt tab open a folder or just read a mail
when i hear the bep indicating a termination. I am now using brltth 3
terminates on windows.
Anders Holmberg, le Mon 27 Apr 2009 09:39:07 +0200, a écrit :
> I can do an alt tab open a folder or just read a mail
> when i hear the bep indicating a termination.
Which kind of beep? From the device? From brltty itself? (a two-tone
falling tune)
s and developers of BRLTTY.
Ämne: Re: [BRLTTY] Brltty terminates on windows.
Anders Holmberg, le Mon 27 Apr 2009 11:58:50 +0200, a écrit :
> A two-ton falling down from the computer yes.
Hum, so brltty is killing itself, I wonder why. Could you stop the brlapi
service and instead run brltty the way
Hi!
I have a braillex el 80 here which i want to run with theportable version of
brltty. Do i have to type in the parameters by hand or should the config tool
work for it? Thanks in advance. /Anders.
___
This message was sent via the BRLTTY mailing l
Hello!
I was reading a mail with nvda and using brltty portable 4.0-2.
Suddenly i just got brltty terminated and i had to restart my pc.
Just wanted to report that.
/Anders.
___
This message was sent via the BRLTTY mailing list.
To post a message, send a
Hello!
I've just got brltty to crash when alt tabbing between firefox and microsoft
outlook 2002.
The following message comes from windows.
Its in swedish but i will try to translate it:
---
brltty.exe - Program error
---
The instruction at "0x67216c9
...@mielke.cc] För Jason White
Skickat: den 8 oktober 2009 08:04
Till: brltty@mielke.cc
Ämne: Re: [BRLTTY] Crash message from windows.
Anders Holmberg wrote:
> I've just got brltty to crash when alt tabbing between firefox and
> microsoft outlook 2002. The following message comes from window
...@mielke.cc] För Dave Mielke
Skickat: den 8 oktober 2009 21:20
Till: Informal discussion between users and developers of BRLTTY.
Ämne: Re: [BRLTTY] Crash message from windows.
[quoted lines by Anders Holmberg on 2009/10/08 at 18:41 +0200]
>I have had similar issues but without any messa
Hello!
I am not using the latest brltty now but i have now a debug.log here.
Who can i send it to.
Can i put it into this list or send it to anybody?
/Anders.
___
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BR
Hello!
´Can this be done from ttb to ctb too?
There are some braille tables for swedish braill i would like to convert to
liblouis so they could be implemented in to nvda.
/Anders.
-Ursprungligt meddelande-
Från: brltty-boun...@mielke.cc [mailto:brltty-boun...@mielke.cc] För Dave Mielke
Sk
Till: Informal discussion between users and developers of BRLTTY.
Ämne: Re: [BRLTTY] Liblouis braille tables in brltty
Anders Holmberg, le Sun 11 Oct 2009 17:20:11 +0200, a écrit :
> ´Can this be done from ttb to ctb too?
Yes. Just revert options and filenames.
> There are some braille
] Liblouis braille tables in brltty
Anders Holmberg, le Mon 12 Oct 2009 08:30:26 +0200, a écrit :
> Well its mor of a table for reading books than computer braille.
Then the liblouis table should be fine.
> Can this brailletable thing be done under windows with cygwin?
What do you mean by
RLTTY] Debug for brltty on windows.
[quoted lines by Anders Holmberg on 2009/10/13 at 03:52 +0200]
>Ok her we go.'
>I attach it as a file.
Your attachment didn't make it to the list because it was 34MB big. Here's what
it shows.
Both the braille-driver and braille-device dir
Hi!
I have a similar problem though i use the com port for my braillex el 80.
It does not find it.
But hal does.
/Anders.
-Ursprungligt meddelande-
Från: brltty-boun...@mielke.cc [mailto:brltty-boun...@mielke.cc] För Øyvind
Lode
Skickat: den 11 december 2009 20:08
Till: BRLTTY mailing-list
: [BRLTTY] Brltty on windows
On Sat, Dec 12, 2009 at 10:07:25PM +0100, Anders Holmberg wrote:
> Hi!
> I have a similar problem though i use the com port for my braillex el
> 80. It does not find it. But hal does.
Which com port number? In a dos box under Windows, you have a limitation on
which
Hi!
I have reported this to Samuel and the nvda list but think i might report
it here too.
I have had some probles with the brltty 4.1 release on xp pro with nvda whe
bringing up the elements list in firefox 3.6 beta.
Brltty just crashes and terminates so i have to restart it.
It also happens that
Hi!
I don't know whats causing brltty 4.1 to crash for me on xp.
When i use nvda and do alt tab from firefox to microsoft outlook it crashes
sometimes, when i open mails in microsoft outlook it crashes.
I wonder if there is anything in the sequences that do the alt tabbing and
opening of mails who
: Re: [BRLTTY] Crashes drives me nuts.
Anders Holmberg, le Sat 30 Jan 2010 17:24:45 +0100, a écrit :
> When i use nvda and do alt tab from firefox to microsoft outlook it
> crashes sometimes
Mmm, could you try to add the following line at the end of your
etc/brltty.conf ?
screen-driver no
amuel
Thibault
Skickat: den 30 januari 2010 17:58
Till: Informal discussion between users and developers of BRLTTY.
Ämne: Re: [BRLTTY] Crashes drives me nuts.
Anders Holmberg, le Sat 30 Jan 2010 17:54:04 +0100, a écrit :
> What does this command line do?
It disables brltty's own screen readi
Hello!
Great.
It seems to work really ok.
/Anders.
- Original Message -
From: "Samuel Thibault"
To: "Informal discussion between users and developers of BRLTTY."
Sent: Saturday, February 06, 2010 9:08 PM
Subject: Re: [BRLTTY] Crashes drives me nuts.
So, how is it going with
screen-
Hello!
Hmm, i really do not know.
I have to install it on my laptop as my desktop i´s not at my home for a
while.
/Anders.
- Original Message -
From: "Samuel Thibault"
To: "Informal discussion between users and developers of BRLTTY."
Sent: Sunday, February 07, 2010 12:41 AM
Subject:
Hello!
WEhat was the problem then?
THanks for all help.
/Anders.
- Original Message -
From: "Samuel Thibault"
To: "Informal discussion between users and developers of BRLTTY."
Sent: Sunday, February 07, 2010 5:38 PM
Subject: Re: [BRLTTY] Crashes drives me nuts.
Hello!
On my old dos machine i had problems accessing the com ports due to the bios
settings.
THey were set as auto so we had to specify the comports numbers.
So try to check that.
/ANders.
- Original Message -
From: "Christian"
To:
Sent: Tuesday, February 09, 2010 4:27 PM
Subject: [
Hello!
Can i use brltty with a bluetooth display under windows?
If yes, is there something to think about before starting.
/Anders.___
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general in
Hello!
I have been trying to configure my brltty to work with a brailliant 64 and it
does not work.
I found that the brailledriver was not included in the brailldriver folder and
in the config program under windows it is not included either.
Can someone send it to me so i can get it to work pleas
tween users and developers of BRLTTY."
Sent: Sunday, February 14, 2010 12:56 AM
Subject: Re: [BRLTTY] Baum nlt included.
Hello,
Anders Holmberg, le Sun 14 Feb 2010 00:46:29 +0100, a écrit :
I found that the brailledriver was not included in the brailldriver folder
and
Which braille dri
river ht # HandyTech
- Original Message -
From: "Samuel Thibault"
To: "Informal discussion between users and developers of BRLTTY."
Sent: Sunday, February 14, 2010 12:18 PM
Subject: Re: [BRLTTY] Baum nlt included.
Anders Holmberg, le Sun 14 Feb 2010 05:33:41 +0
ary 14, 2010 8:48 PM
Subject: Re: [BRLTTY] Baum nlt included.
Anders Holmberg, le Sun 14 Feb 2010 20:32:55 +0100, a écrit :
...
#braille-driver bd # Braudi
#braille-driver bl # BrailleLite
braille-driver bm # Baum
#braille-driver bn # BrailleNote
#braille-driver cb # CombiBraille
#braille-driver ec #
Bluetooth on windows with brltty. Hello!
I am using xp and want to try to use my braillino on windows with
bluetooth and brltty.
How can this be done easely.
/Anders.
___
This message was sent via the BRLTTY mailing list.
To post a message, send an e
Hello!
Of course i can.
Dave Mielke skrev 2010-03-26 06:31:
[quoted lines by Anders Holmberg on 2010/03/25 at 21:37 +0100]
Hi:
I am using xp and want to try to use my braillino on windows with
bluetooth and brltty.
How can this be done easely.
Bluetooth on Windows is something
Hi Lars!
Can you please remind me how to do this?
It was too long since i used dos commands.
/Anders.
Lars Bjørndal skrev 2010-03-26 09:38:
Hi Anders!
Dave Mielke writes:
[quoted lines by Anders Holmberg on 2010/03/25 at 21:37 +0100]
[...]
I am using xp and want to try to
Hello Lars!
Thanks for that.
It was more simple than i thought.
/Anders.
Lars Bjørndal skrev 2010-03-27 12:41:
Hello Anders!
You wrote:
Can you please remind me how to do this?
It was too long since i used dos commands.
You only need to use the dos prompt when starting brltty. Use
Hi!
As pointed out here i would like bluetooth support for windows.
Thanks in advance.
/Anders.
Dave Mielke skrev 2010-04-15 16:37:
I think the time has come for release 4.2 of brltty. Could each of you please
build and use the latest development code in order to give it a thorough test?
Also, p
Hello!
I have a program here called testdisk made by cgsecurity.org.
Its opensource.
However there is a lot of problems using the applikation.
For example you should use the arrow keys to move in a list of disks.
However i would like to be able to track these invssible cursors with
brltty.
Could
Hello!
I am about to try to recover a partition table and boot sector on a
damaged hard drive i have here.
If i boot into the recovery console or in non graphical dos what version
of brltty will i have to use then?
Is it the windows version or the dos version.
/A
___
Hello!
Has anyone here tried to run brltty together with the portable linux hat
can be found at portable apps.
In my brain this should be possible but i am not a good linux user so i
can not say.
/A
___
This message was sent via the BRLTTY mailing lis
.
Labrador
On Fri, May 14, 2010 at 04:37:05PM +0200, Anders Holmberg wrote:
Hello!
Has anyone here tried to run brltty together with the portable linux hat
can be found at portable apps.
In my brain this should be possible but i am not a good linux user so i
can not say.
/A
Hello!
TOtally agree.
Even though i am using nvda but if i have to do more complicated things
on windows i have to use hal.
I dont know why it is so difficult to build working braille with nvda
but i guess its not to important.
Maybe one should learn programming .
/A
Øyvind Lode skrev 2010-05
going to happen
anytime soon.
-Original Message-
From: brltty-boun...@mielke.cc [mailto:brltty-boun...@mielke.cc] On Behalf
Of Anders Holmberg
Sent: 16. mai 2010 20:25
To: Informal discussion between users and developers of BRLTTY.
Subject: Re: [BRLTTY] braille with nvda
Hello!
TOtally agree.
E
Hello!
Actually i dont know how to do that.
I thought this was able to select from the startup menu when pressing f8.
/A
Samuel Thibault skrev 2010-05-19 17:40:
Hello,
Anders Holmberg, le Thu 06 May 2010 22:30:09 +0200, a écrit :
I am about to try to recover a partition table and boot
Hello!
THen you sould try to select another com port.
For example a usb port and let the supervario-s drivers act as a
virtual port and reconfigure brltty.
/A
Moty Azrad skrev 2010-05-20 08:12:
Dave,
You had released brltty 4.2-1 for windows so it must work with it.
I don't have any expla
Hello Friends!
I just installed the portable version of brltty and have now tried it
out under xp pro with nvda.
And moty is correct, i can not scroll through with the keys used for
this purpose.
I am also using com 3 but i do not understand why com 3 should have this
problem.'
Would you like
Samuel Thibault skrev 2010-05-21 20:44:
Anders Holmberg, le Fri 21 May 2010 20:23:24 +0200, a écrit :
Would you like me to e-mail a debug.log so you can check it out?
It can not hurt to have it, yes :)
Samuel
___
This message was sent via the
Hello!
For me the brltty works fine if you do not use nvda.
SO i guess its more a nvda problem than a brltty problem.
/A
Jason White skrev 2010-05-26 12:22:
Moty Azrad wrote:
I'm talking about using Brltty4.2-1 with Windows 7 operating system of
Microsoft and not about Linux.
the display k
ilto:mo...@013.net>
mot...@gmail.com <mailto:mot...@gmail.com>
azrad_m...@hotmail.com <mailto:azrad_m...@hotmail.com>
ISRAEL
*From:* Anders Holmberg <mailto:and...@pipkrokodil.se>
*Date:* יום רביעי 26 מאי 2010 :39
*To:* Informal discussion between users and developers of BRLTT
I totally agree here.
They do a great job and i must say that when i tested out orca today
with only braille it worked just fine.
So Moty please be a bit patient.
It sounds like you are a bit wrong, injured.
They are doing their best to help us out.
Blessings!
Nicolas Pitre skrev 2010-05-26 2
Hello!
Attached is the debug.log for brltty-2.1 for windows together with nvda.
I do hope it makes sense.
Anything i can do for brltty i would do it.
Blessings!
/A
brltty.exe: configuration directive specified more than once: braille-device
brltty.exe: configuration directive specified more than o
Hello!
Åtkomst nedad is the same as:
access denied.
BLessings!
/A
Dave Mielke skrev 2010-05-27 13:32:
[quoted lines by Anders Holmberg on 2010/05/27 at 10:53 +0200]
Attached is the debug.log for brltty-2.1 for windows together with nvda.
Thank you very much.
I do hope it
Hi!
I have never got cursur routing to work in nvda.
I 'd thought that this wasn't implemented yet.
/A
Michel such skrev 2010-07-02 19:53:
Hi,
The only things currently implemented in NVDA are cursor routing and ability to
scroll left and right on a line.
All other functions, even lineup an
Hello!
My system is windows xp pro 32 bit.
Thanks for all help.
/A
Dave Mielke skrev 2010-07-06 02:54:
[quoted lines by Moty Azrad on 2010/07/06 at 03:40 +0300]
I'm using Windows 7 32-bit operating system.
Anders: I believe you were able to reproduce the same problem. What kind of
system can
Hello!
I can not get them to work on version 4.2.1 so i use 4.1.2 now.
THough brltty on its own works great under the windows console.
/A
Dave Mielke skrev 2010-07-07 15:37:
[quoted lines by Anders Holmberg on 2010/07/07 at 11:41 +0200]
I have never got cursur routing to work in nvda.
Not
Hello!
Yes this problem is occuring for me when using brltty 4.2 with nvda.
So yes i can reproduce it.
/A
Dave Mielke skrev 2010-07-08 23:19:
[quoted lines by Anders Holmberg on 2010/07/08 at 21:17 +0200]
My system is windows xp pro 32 bit.
Can you reproduce the problem where left/right
Hi!
It seems that the later snapshots of nvda does not have a driver for
brltty for some strange reason.
Someone told me this is because some issues with the latest python.
I have asked folks on the dev list but they seem to have too much to do
with other things.
Does anybody here know anythi
will be to the right Python level, it will
work again.
- Original Message -
*From:* Anders Holmberg <mailto:and...@pipkrokodil.se>
*To:* Informal discussion between users and developers of BRLTTY.
<mailto:brltty@mielke.cc>
*Sent:* Monday, July 19, 2010 10:0
Hello!
I guess you haven't found any solution for the navigation problems with
brltty under windows yet?
Thanks.
/A
___
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information,
Hello!
I come to think of one thing.
But i need some help regarding this.
Maybe i should try to set my brailliant to work as a handytech
brailledisplay.
But i can not seem to set it as this.
There is a key combination to get into the main menu which i cant seem
to remember.
ANy thoughts on t
Hi!
I am trying to emulate a handytech on my brailliant 64 brailledisplay.
However this emulation mode seems not to work with brltty.
My intentions was to try if a brailliant emulating a handytech could be
an alternative to solve the key bindings problem in nvda.
Has any linux users using a bra
You have to be pationt Moty as this has not ben fixed yet.
Yout can install an older version of brltty an run that with the latest
snaps, this works perfectly for me and should work for you.
Blessings.
/A
Moty Azrad skrev 2010-07-22 05:32:
Hi samuel and dave
I'm happy to say that NVDA main-356
Hi!
Can brltty be set in any kind of sleep mode.
It seems that when i am running window eyes the braille does not work.
Even if i have set the correct braille display and port.
So i guess it must deppend on the brltty.
/A
___
This message was sent via t
Hello!
THis is strange.
When brltty was sleeping i started window eyes but it wont work unless
i uninstall brltty.
/A
Samuel Thibault skrev 2010-08-22 12:52:
Anders Holmberg, le Sun 22 Aug 2010 10:06:43 +0200, a écrit :
Can brltty be set in any kind of sleep mode.
Yes. It does so
Hi!
FOrgot the release parameter.
Sorry for that one.
However i removed we due to braille problems under we.
/A
Samuel Thibault skrev 2010-08-22 17:50:
Anders Holmberg, le Sun 22 Aug 2010 17:35:16 +0200, a écrit :
When brltty was sleeping i started window eyes but it wont work unless i
Hi!
In the brltty 4.2.2 i can't find the handy tech braill driver when
running the brlconf.exe and when editing brl.conf file.
I have tried several things to get my braillino work on windows but with
no luck.
Running the brlttyconf.exe, make changes to the brltty.conf and running
a command to
No
Samuel Thibault skrev 2010-09-08 11:51:
Anders Holmberg, le Wed 08 Sep 2010 08:52:14 +0200, a écrit :
In the brltty 4.2.2 i can't find the handy tech braill driver when running the
brlconf.exe and when editing brl.conf file.
It is there in the file:
#braille-driver ht # Hand
Hi!
One thing you should know is that the braillino is connected via bluetooth.
I am trying to use it over a serial bluetooth device.
I dont know if this will work but hopefully there will be bluetooth
support for windows.
/A
Anders Holmberg skrev 2010-09-08 13:31:
No
Samuel Thibault skrev
Hello!
Yes i have done that but it does not work for me at all.
I dont know what i am doing wrong.
I also can not find the handytech in the config manager for brltty under
windows.
Its not there.
/A
Dave Mielke skrev 2010-09-08 14:26:
[quoted lines by Anders Holmberg on 2010/09/08 at 13:56
Hi!
I am trying to use a comport on bluetooth but it does not work.
/A
Samuel Thibault skrev 2010-09-08 14:03:
Anders Holmberg, le Wed 08 Sep 2010 13:56:00 +0200, a écrit :
One thing you should know is that the braillino is connected via bluetooth.
I am trying to use it over a serial
Hi!
So i can't yuse the com26 on bluetooth then?
That is a suggestion i have then.
/A
Samuel Thibault skrev 2010-09-08 18:38:
Lars Bjørndal, le Wed 08 Sep 2010 18:35:56 +0200, a écrit :
[Anders Holmberg]
I am trying to use a comport on bluetooth but it does not work.
Please note
Hello!
It seems not only the vario and brailliant displays has problems with
nvda and the latest brltty.
I can not use my handytech display due to the fact that the buttons does
not work with nvda.
SO i have to get back to the old one.
/A
___
This me
Hi!
Ok.
Will try that.
THink i have problems with my bluetooth dongle.
So now i am running on com 1.
It works though its hard to place the display so you have good comfort.
/A
Samuel Thibault skrev 2010-09-09 10:15:
Anders Holmberg, le Thu 09 Sep 2010 07:49:12 +0200, a écrit :
So i can't
Hello!This might not be a brltty problem.
I have a braillex el 80 (older version) here connected to com 1 on my xp
machine.
For some reason i can not seem to get brltty to detect it.
I have tried hal which is my main screenreader and i can get braille on
to the display with some glitches.
It
Hi!
It seems that i have solved my problem with my papenmeier display.
It was just to unplug and plug the power cable.
/A
Anders Holmberg skrev 2010-09-11 00:04:
Hello!This might not be a brltty problem.
I have a braillex el 80 (older version) here connected to com 1 on my
xp machine.
For
Hi!
I htink i solved it.
I have changed display and am now using a braillex el 80 instead.
Note that i am talking about the portable version of brltty.
/A
Samuel Thibault skrev 2010-09-11 01:30:
Anders Holmberg, le Wed 08 Sep 2010 17:38:42 +0200, a écrit :
Yes i have done that but it does
Hi!
How does this window eyes support really works?
/A
___
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
Hello!
I was trying to use the live cd of vinux.
Normally when i have my brailliant connected to the usb brltty use to
detect it when running vinux live cd.
However my brailliant is on service so i have my braillex el 80 here
connected to usb via a serial to usb adapter.
Now brltty wont dete
Hello!
I was trying to use the live cd of vinux.
Normally when i have my brailliant connected to the usb brltty use to
detect it when running vinux live cd.
However my brailliant is on service so i have my braillex el 80 here
connected to usb via a serial to usb adapter.
Now brltty wont dete
Hi!
Having read the window eyes doc for brltty now but still does not work.
I can choce the right display which fo rme is brlapi generic.
When restarting i get a message about a component that can't be found.
I have the dll file in the window eyes directory so i don't know what
could be the pro
Hi!
I have solved the window eyes problem.
I had to copy the brlap.dll file to the window eyes folder.
BUt from what i can see its not documented.
I may be totally wrong so i am not sure.
/A
Samuel Thibault skrev 2010-09-18 12:54:
Anders Holmberg, le Sat 18 Sep 2010 11:17:40 +0200, a écrit
Hi!
I have one question.
Can i use brltty with an old papenmeier el 80 (only serial port)?
I have tried to run the live cd but it does not start.
I only get speech.
With my brailliant which now is on repair i have no problem.
Thanks.
/A
___
This message
Hi!
Actually i am in need to get in to the recovery console in windows xp.
I have to repair my boot sectors but what i am wondering is if the
brltty would work under this console?
My guessing is that it may work but i am wondering how to load it?
/A
__
Standalone?
??? skrev 2010-11-30 15:13:
Hi:
Which parameters should I need for building a standalone brltty?
Thanks!
Coscell
___
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general inf
Hi!
I am now using the latest windows version of brltty but cant use it with
nvda due to that i cant navigate with the display keys.
I'd thought this was fixed but i have had my brailliant on repair and
have been using a braillex el 80 during this time and this display works
perfectly.
Will th
Hi!
I have successfully used a braillino and a braillex el 80 on my xp
machene but not a brailliant.
/A
Dave Mielke skrev 2010-12-20 06:30:
[quoted lines by Anders Holmberg on 2010/12/19 at 01:17 +0100]
Actually i would like to have som help here.
Many people know that i and other
Dave Mielke skrev 2010-12-21 18:42:
[quoted lines by Anders Holmberg on 2010/12/21 at 16:44 +0100]
Yes!
However James Teh told me that he has used a brailliant 40 with no
problems using nvda and brltty. Exactly the same version as i have
used.
I know there was a problem in brltty 4.2, but
# This is a configuration file template for the BRLTTY application.
# Uncomment those entries which apply to your personal needs and system
# requirements.
# BRLTTY expects to find its configuration file in "//etc/brltty.conf"
# (can be overridden with the -f [--configuration-file=] option).
# I
problems with other devices using this
serial to usb converter.
/A
Dave Mielke skrev 2011-03-26 01:30:
[quoted lines by Anders Holmberg on 2011/03/24 at 10:13 +0100]
Actually i am running brltty 4.2.3 for windows with nvda.
And i had to do some changes to my system and therefore had to change
com
Hi!
I use brltty under windows xp command prompt.
I have a program called testdisk which i want to use and am trying to use.
Its a freeware program.
How can i track the highligted cursors that seem to apear when for
example selecting disks and such.
The testdisk homepage for those who wants to t
2011-07-14 22:41:
[Anders Holmberg]
Can brltty be put to sleep while using another screenreader?
For example supernova screenreader.
I only have a usb driver for my papenmeier display.
No virtual com port can be created even though i have tried.
So any help is appreciated.
Using BRLTTY over USB in
Hi!
Which is the latest firmware for the braillex el 40s?
Actually i was wrong about my el, its a 40s not a 80s.
My version is 1.25.
/A
Nath skrev 2011-08-08 12:26:
I have encountered the same problem a few years ago with an old version
of the firmware and a Papenmeier BRAILLEX EL40S. Upgrading
Hi!
Ok, i have no idea on how to downgrade brltty on vinux.
But where is the preferences menu in brltty so i can turn cursor
blinking on to try if this will help.
Thanks.
/A
Dominique Asselineau skrev 2011-08-08 20:42:
Anders Holmberg wrote on Mon, Aug 08, 2011 at 12:37:19PM +0200
Hi!
Which
t the usb cable
ons 2011-09-28 klockan 01:03 +0200 skrev Samuel Thibault:
Anders Holmberg, le Tue 27 Sep 2011 22:21:02 +0200, a écrit :
If i use brltty and nvda and then want to use for example hal or jaws how can i
go about this?
If you have a manufacturer-provided driver that emulates a virtual
s
Hi!
It seems you are right but i can not figure out how to fix that.
Thanks anyway.
/A
Jason White skrev 2011-10-02 03:13:
Anders Holmberg wrote:
I have just installed brltty to my 64 bit windows and i am trying to
get the libusb driver to work with no luck.
I get an error message which says
Hi!
I can not see the braille api choice in the braille displays combobox.
I have to check my braille.ini once again then.
/A
Lars Bjørndal skrev 2011-10-09 20:45:
[Anders]
Nope it didn't work for me either.
What does not work? Don't you get the brl-api choice in the dialog
where you select t
Hi!
I had to replace my motherboard as the old one went south.
Also had to reinstall windows 7 64 bit.
now when i installbrltty with libusb32 driver it wont detect my
papenmeier el40s.
Although window eyes finds the display but its not configured to use brltty.
I don't se libusb in the deviceman
Hi!
I have attached the debug.log from my new pc where brltty seems not to
work properly.
In the log it complains about not finding the pm driver.
Wonder if windows messes something up.
Really frustrating this.
/A
BRLTTY 4.3-4 rev 5477 [http://mielke.cc/brltty/]
brltty.exe: Working Directory: C:
Hi!
Is it possible to specify a usb port in the brltty.conf file on windows 7?
I am really struggling with my desktop with windows 7 64 bit os.
I can't even create a virtual serial port.
I must say i do hate windows for now!
/A
___
This message was sent
1 - 100 of 306 matches
Mail list logo
