hi Dave and all,
as follow-up :
patch-to-screen-4.2.1 apply correctly on freebsd.
- screen-4.2.1.tar.gz i mentionned as macports distfile in fact is the gnu
source,
patching is done just before configure as usual.
i must mention that on osx 10.9.X
macports install screen on /usr/bin and you do
Hi Dave,
you wrote:
send us a debug log:
but, the log returns nothing else than initialization failed, driver not found.
I investigated a bit more.
when usb.c call libusb to read the reply from esys 40,
the response is -1, where focus retuns 64 bytes;
and as i understand the thing:
1. or th
Hi Raoul,
How do you configure brltty?
How do you run it?
When you try the Eys, make usure to use the
-b eu
options on the command line to make sure it really is the Eurobraille
driver which is used.
Shérab.
___
This message was sent via the BRLTTY mai
Dear Raoul,
So nothing has changed on the Esys itself? No firmware upgrade?
I've been told that there are two versions of the Esys, version 1 and
version 2. Do you know something about this? What is it that changes
between versions 1 and 2? Is it a software/firmware or hardware change?
Which vers
On 16 Sep 2014, at 11:56, Shérab wrote:
yes Shéral it always what i’ve done=
the problem is more complicated than this.
Please refer to my message which goes further.
Thanks for your interest.
Best Regards
Raoul
> Hi Raoul,
>
> How do you configure brltty?
> How do you run it?
>
> When yo
On Sep 16, 2014, at 4:33 AM, Raoul wrote:
> hi Dave and all,
>
> as follow-up :
> patch-to-screen-4.2.1 apply correctly on freebsd.
> - screen-4.2.1.tar.gz i mentionned as macports distfile in fact is the gnu
> source,
> patching is done just before configure as usual.
To clarify, You sai
On 16 Sep 2014, at 14:56, Cheryl Homiak wrote:
>
>
>
> On Sep 16, 2014, at 4:33 AM, Raoul wrote:
>
>> hi Dave and all,
>>
>> as follow-up :
>> patch-to-screen-4.2.1 apply correctly on freebsd.
>> - screen-4.2.1.tar.gz i mentionned as macports distfile in fact is the gnu
>> source,
>> pat
[quoted lines by Raoul on 2014/09/16 at 11:33 +0200]
>patch-to-screen-4.2.1 apply correctly on freebsd.
It'd sdeem, then, that the patch is probably platform-independent. Could you
please send it to me for addition to brltty's Patches/ subdirectory?
--
Dave Mielke | 2213 Fox Crescent
[quoted lines by Raoul on 2014/09/16 at 11:49 +0200]
>>send us a debug log:
>
>but, the log returns nothing else than initialization failed, driver not found.
That's because you didn't log with the two additional options that I requested.
The first option is -L/path/to/logfile. Note that this is
[quoted lines by Raoul on 2014/09/16 at 13:36 +0200]
>yes Shéral it always what i’ve done=
>the problem is more complicated than this.
I'm still going to reask his question a bit more strongly. Please tell us which
command line options and which brltty.conf statements are in effect when you
try
On 16 Sep 2014, at 15:29, Dave Mielke wrote:
> [quoted lines by Raoul on 2014/09/16 at 13:36 +0200]
>
>> yes Shéral it always what i’ve done=
>> the problem is more complicated than this.
>
> I'm still going to reask his question a bit more strongly. Please tell us
> which
> command line opt
On 16 Sep 2014, at 15:15, Dave Mielke wrote:
> [quoted lines by Raoul on 2014/09/16 at 11:33 +0200]
>
>> patch-to-screen-4.2.1 apply correctly on freebsd.
>
> It'd sdeem, then, that the patch is probably platform-independent. Could you
> please send it to me for addition to brltty's Patches/
> brltty -b eu -d usb: -e -l7 -LSOMEFILE
>
> brltty.conf:
> text-table fr-2007
>
> braille-driver eu
> braille-device usb:
>
> this is not incorrect i think.
>
> Dave, the eu_esysiris driver is never called as i said earlier.
> putting plenty of logMessage in it do not appear at all in the l
Shérab (2014/09/16 17:08 +0200):
> braille-parameters eu:protocol=iris
I do insist that it has to be iris although your display is an esys! The
line above is correct!
Shérab.
___
This message was sent via the BRLTTY mailing list.
To post a message, send
[quoted lines by Raoul on 2014/09/16 at 16:59 +0200]
>ok: but=
>
>brltty -b eu -d usb: -e -l7 -LSOMEFILE
>
>brltty.conf:
>text-table fr-2007
>
>braille-driver eu
>braille-device usb:
>
>this is not incorrect i think.
It looks fine,except for your -l option. Instead of -l7, please use:
-ldebug,
[quoted lines by Raoul on 2014/09/16 at 17:03 +0200]
Hi:
>OK Dave, i sent it already, but does not matter:
Then, I guess, I missed it. I think the reason is that you're sending it as
part of the message rather than as an attachment. I do remember the email in
which I thought you'd sent it, an
Hi again,
Shérab (2014/09/16 17:10 +0200):
> Shérab (2014/09/16 17:08 +0200):
> > braille-parameters eu:protocol=iris
>
> I do insist that it has to be iris although your display is an esys! The
> line above is correct!
No no sorry, I was wrong.
I just checked the source code to be completely s
I noticed that the inline version of the patch doesn’t look right when viewed
in the email. The first column should be either blank, + or -. To apply this
patch, I would need to bring it into an editor and add spaces at the beginning
of many of the lines.
A second potential problem is that the
Hi Dave,
you asked me the log, here it is taken from debian, and obtained from
the commandline:
brltty -b eu -d usb: -e -l7 -L error
perhaps a link:
device busy: 0 (hid)...
Regards
Raoul
2014-09-16@17:36:39.169 pushed command environment: initial
2014-09-16@17:36:39.175 BRLTTY 5.2dev rev BRL
[quoted lines by Raoul MEGELAS on 2014/09/16 at 17:55 +0200]
>you asked me the log, here it is taken from debian, and obtained from the
>commandline: brltty -b eu -d usb: -e -l7 -L error
Please don't use -l7 as it isn't good enough. Please, instead, use:
-ldebug,usb,inpkts,outpkts
--
Dave
Hello Dave,
Please find attached my patch against screen-4.2.1 and its checksum.
Best regards
Raoul Megelas
rm...@free.fr
--- extern.h.org2014-09-15 21:02:12.0 +0200
+++ extern.h2014-09-15 21:11:27.0 +0200
@@ -33,12 +33,19 @@
#endif
/* screen.c */
+
+extern void S
Hello Dave,
Please find attached 2 files as asked.
they have been obtained with the same command:
brltty -b -Bprotocol!esys -d usb: -e -ldebug,usb,inputs.outputs -Lsomefile.
they are all english files as asked by Shérab.
Hope this help.
Raoul MEGELAS
osx_esys_error
Description: Binary data
[quoted lines by Raoul on 2014/09/16 at 22:10 +0200]
>Please find attached my patch against screen-4.2.1 and its checksum.
Thank you. The patch has now been added to brltty's Patches/ subdirectory.
--
Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God.
Phone: 1-613-72
Thanks much!
It will be good to have a screen version to use that is not in danger of
disappearing, especially since the patch will work across platforms. Now that I
can do it without using the patched binary, I am going to try it as soon as I
have a few minutes.
--
Cheryl
I tried and trie
24 matches
Mail list logo
