Hi Dave, you wrote:
send us a debug log: but, the log returns nothing else than initialization failed, driver not found. I investigated a bit more. when usb.c call libusb to read the reply from esys 40, the response is -1, where focus retuns 64 bytes; and as i understand the thing: 1. or the interrupt is not set properly, 2. or a filter block the reply. in all case: i investigate on freebsd whith git version up-to-date. (on debian the bihaviour is the same). normally when esys 40 receive a call on usb lines it displays: usb connected. but this does not appear, it stay on usb not connected. this mean that the initialization is not what its firmware expects. as i said in a precedent message, it is related to brltty 5, brltty 4.5 works fine. i will continue to see. Best regards Raoul MEGELAS rm...@free.fr _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
