On Fri, 20 Dec 2024 at 14:16, Unkdef unkdef wrote:
>
> Address = "127.0.0.1"
> it fixed long waiting of load tables!
>
> but i have another problem:
> after clicking a different menu in bacularis about 5 min, page is stuck. dont
> load anymore(endless page loading)(F5 dont helps).
> Helps only
On Fri, 20 Dec 2024 at 09:53, Unkdef unkdef wrote:
>
> this is output
>
> 20-Dec-2024 11:50:36 bconsole: lex.c:254-0 Open config file:
> /opt/bacula/etc/bconsole.conf
> 20-Dec-2024 11:50:36 bconsole: lex.c:254-0 Open config file:
> /opt/bacula/etc/bconsole.conf
> Connecting to Director ub22-2bac
hi all
Try disconnecting any connection from the VM, whether it is host, Bridge,
or LAN, then try if the problem is fine then DNS or your connection is weak
في الجمعة، ٢٠ ديسمبر ٢٠٢٤ ١٠:٥٥ ص Marcin Haba كتب:
> On Fri, 20 Dec 2024 at 07:31, Unkdef unkdef
> wrote:
> >
> > So, i make an experiment
On Fri, 20 Dec 2024 at 07:31, Unkdef unkdef wrote:
>
> So, i make an experiment I install bacula 15.0.2 to ubuntu 22.04.5 server
> edition from
> https://www.bacula.org/packages/65e8113ba585c/debs/15.0.2/dists/jammy/main/binary-amd64/INSTALL
>
> i install
>
> apt-get install dbconfig-common mysq
On Thu, 19 Dec 2024 at 09:23, Unkdef unkdef wrote:
>
> no i didnt try because all clients have dynamic ip.
> may be you have some more advice ?
>
> i notice that when i type - bconsole in ssh I see
> Connecting to Director localhost:9101
>
> wait 5-7 seconds
> and then i see this.
> 1000 OK: 10002
On Fri, 29 Nov 2024 at 07:37, Unkdef unkdef wrote:
>
> I use dns in ubuntu 22.04 like 192.168.10.11 (my dns in my local network).
> in bacula-dir.conf i use names instead ip in clients addresses:
Hello Unkdef,
Thanks. Did you try to change names into addresses? I specially would
propose to try
On Thu, 28 Nov 2024 at 10:23, Unkdef unkdef wrote:
> I try mysqltunner but it dont helps... Please, help.
> So when I login to bacularis i see empty tables, and after 10-15 sec content
> from tables are apeared. and when i click jobs a must wait 10-20 sec before i
> see content... how to fix ?
>
I try mysqltunner but it dont helps... Please, help.
So when I login to bacularis i see empty tables, and after 10-15 sec
content from tables are apeared. and when i click jobs a must wait 10-20
sec before i see content... how to fix ?
I use only 42 jobs a day.
my server 8 cores 2.6ghz , 12GB Ram.
On Thu, 7 Nov 2024 at 21:18, Chris Wilkinson wrote:
>
> Thank you, I'll give that a go.
>
> At what point does this get copied to Sourceforge?
Hello Chris,
This point is the Bacula release.
Best regards,
Marcin Haba (gani)
___
Bacula-users mailing l
Thank you, I'll give that a go.
At what point does this get copied to Sourceforge?
-Chris
On Thu, 7 Nov 2024, 18:17 Marcin Haba, wrote:
> On Thu, 7 Nov 2024 at 19:01, Chris Wilkinson
> wrote:
> >
> > I downloaded v15.0.2 from sourceforge. Is there another place with a
> version that includes
On Thu, 7 Nov 2024 at 19:01, Chris Wilkinson wrote:
>
> I downloaded v15.0.2 from sourceforge. Is there another place with a version
> that includes this fix?
Hello Chris,
There isn't any version that includes the fix, but if you are
interested, you can download latest changes directly from the
I downloaded v15.0.2 from sourceforge. Is there another place with a
version that includes this fix?
-Chris-
On Thu, 7 Nov 2024, 17:45 Marcin Haba, wrote:
> On Thu, 7 Nov 2024 at 18:09, Chris Wilkinson
> wrote:
> >
> > Hello Marcin
> >
> > Thanks for your prompt reply. Is this planned to be fi
On Thu, 7 Nov 2024 at 18:09, Chris Wilkinson wrote:
>
> Hello Marcin
>
> Thanks for your prompt reply. Is this planned to be fixed in Baculum or
> should I take this as a warning that Baculum is being wound down in favour of
> Bacularis?
>
> If that’s the case, I should take your previous advice
Hello Marcin
Thanks for your prompt reply. Is this planned to be fixed in Baculum or should
I take this as a warning that Baculum is being wound down in favour of
Bacularis?
If that’s the case, I should take your previous advice and change to Bacularis.
Best
-Chris-
> On 7 Nov 2024, at 17:
On Thu, 7 Nov 2024 at 17:53, Chris Wilkinson wrote:
>
> I just set up v15+baculum on a new server. Baculum gives the warning below
> that I’ve not seen before on v11. It occurs when clicking on any job details
> in the jobs list.
>
> DataTables warning: table id=schedule_list - Requested unknown
https://drive.google.com/file/d/1hb2ToEXEnhD6FAy2Fb7Tyn6jDq9J-sm4/view?usp=drivesdk
My script is here. It runs as root.
-Chris-
On Tue, 5 Nov 2024, 07:18 Marcin Haba, wrote:
> On Mon, 4 Nov 2024 at 21:30, Chris Wilkinson
> wrote:
> >
> > Thank you. The script is only an extract from the whole
On Mon, 4 Nov 2024 at 21:30, Chris Wilkinson wrote:
>
> Thank you. The script is only an extract from the whole process. I'm happy to
> share the full thing if anyone is interested.
Hello Chris,
Yes, please share it. This type of tools can be useful for other
interested in users visiting this t
Thank you. The script is only an extract from the whole process. I'm happy
to share the full thing if anyone is interested.
-Chris-
On Mon, 4 Nov 2024, 20:05 Marcin Haba, wrote:
> On Mon, 4 Nov 2024 at 16:00, Chris Wilkinson
> wrote:
> >
> > I ran into a problem in that the make step in the bu
On Mon, 4 Nov 2024 at 16:00, Chris Wilkinson wrote:
>
> I ran into a problem in that the make step in the build process isn’t copying
> the .htaccess files to the build directory.
Hello Chris,
The Apache web server config provided with Baculum does not use the
.htaccess files. The web server co
I ran into a problem in that the make step in the build process isn’t copying
the .htaccess files to the build directory.
chrisw@m910q:~$ ls -al /tmp/baculum-files/var/www/baculum/
total 84
drwxr-xr-x 5 root root4096 Nov 4 14:02 .
drwxr-xr-x 3 root root4096 Nov 4 14:02 ..
drwxr-xr-
On Mon, 4 Nov 2024 at 13:36, Chris Wilkinson wrote:
>
> Are the instructions in the manual install section of the v15 operators guide
> at
>
>
> https://www.bacula.org/15.0.x-manuals/en/console/Baculum_API_Web_GUI_Tools.html#SECTION002121
> the correct ones to follow?
Hello Ch
Are the instructions in the manual install section of the v15 operators
guide at
https://www.bacula.org/15.0.x-manuals/en/console/Baculum_API_Web_GUI_Tools.html#SECTION002121
the correct ones to follow?
-Chris-
On Sun, 3 Nov 2024, 12:47 Marcin Haba, wrote:
> On Sat, 2 Nov 2024
On Sat, 2 Nov 2024 at 02:19, d09 wrote:
>
>
> Installing Baculum without the package is pretty easy if you have a
> little bit of Debian and Apache experience.
>
> Furthermore, Bacularis is the way to go. Marcin is on top of it all.
> Kudos to Marcin.
>
> ---
>
> On 11/1/2024 10:10 AM, Chris Wilk
Installing Baculum without the package is pretty easy if you have a
little bit of Debian and Apache experience.
Furthermore, Bacularis is the way to go. Marcin is on top of it all.
Kudos to Marcin.
---
On 11/1/2024 10:10 AM, Chris Wilkinson wrote:
May I ask if Baculum15 is available in a
On Tue, 15 Oct 2024 at 05:18, Aaron Baxter wrote:
> Oh thank you. That got me to the right place to see what it did.
>
> It had a symlink to the file, but in my home directory (in their respective
> directories of course)
>
> lrwxrwxrwx 1 www-data www-data 76 Oct 15 01:58 messages.mo ->
> /hom
Marcin,
Oh thank you. That got me to the right place to see what it did.
It had a symlink to the file, but in my home directory (in their respective
directories of course)
lrwxrwxrwx 1 www-data www-data 76 Oct 15 01:58 messages.mo ->
/home/myuser/baculum_runtime/usr/share/locale/en/LC_MESSAGES
On Tue, 15 Oct 2024 at 04:31, Aaron Baxter wrote:
> I may have gone about this all wrong, but I could only get Baculum
> installed on Ubuntu 22.04 through the git repository. I ran the makefile
> customized to my environment, manually created and copied the files,
> changed permissions, and ran
Hello Jose,
Yes, this Baculum from Bullseye repository is a bit older and not adapted
to Bacula 15.
As you could notice, Bacularis is a better choice for that. It has been
prepared and well tested with Bacula version 15.
The general idea of Bacularis for supported Bacula versions is to help
user
Hello Unkdef,
Thanks for your feedback.
I would propose to do a test. Could you please go to the application
settings page (the gear wheel icon on the top left side), there please go
to the 'Display options' tab and in an option with label "Job age on the
dashboard job graphs" could you put a val
Hello Unkdef,
Yes, it does. As Rob mentioned, Bacularis is based on Baculum that supports
Russian translations too. The translations are there thanks to Sergey
Zhidkov who prepared them.
Best regards,
Marcin Haba (gani)
On Sun, 7 Apr 2024 at 10:50, Unkdef unkdef wrote:
>
> ok i try bacularis
>
ok i try bacularis
does bacularis support russian language interface?
Rob Gerber 7 апреля 2024 г. 01:24:27 написал:
Unkdef, one important thing to know is that Bacularis is a friendly fork of
baculum. It's very similar, and Marcin has been actively maintaining it.
Marcin is also a baculum deve
Unkdef, one important thing to know is that Bacularis is a friendly fork of
baculum. It's very similar, and Marcin has been actively maintaining it.
Marcin is also a baculum developer.
Basically, Bacularis is the better, more optimized tool.
This doesn't mean that the source of your problem is ce
i use only 45 backup jobs a day...
Marcin Haba 6 апреля 2024 г. 20:14:30 написал:
Hello Unkdef,
Yes, Baculum 11.0.6 is a bit old and can be a little slow, specially for
many jobs and MySQL. There exists a couple of techniques to speed it up
like described here:
https://baculum.app/doc/brie
Hello Unkdef,
Yes, Baculum 11.0.6 is a bit old and can be a little slow, specially for
many jobs and MySQL. There exists a couple of techniques to speed it up
like described here:
https://baculum.app/doc/brief/troubleshooting.html#the-baculum-job-tables-are-loading-slowly
or here:
https://www.m
Hello Timothé,
Could you try to log out and log in again to the web interface? Is it
solving this problem?
Thanks in advance for letting us know.
Best regards,
Marcin Haba (gani)
On Thu, 18 Jan 2024 at 02:39, timothe pennec wrote:
>
> Hello everyone,
>
> I'm new in bacula and baculum, i've one
Mandi! Lionel PLASSE
In chel di` si favelave...
> In baculum there is an "enabled" checkbox for jobs.
> It's possible to disable schedules too
Mmmmhhh... i really don't find it; probably not in version 9.6.6.3?
Thanks.
--
...mi dispiace solo un po' per gli svizzeri, ieri hanno giocato una
In baculum there is an "enabled" checkbox for jobs.
It's possible to disable schedules too
-Message d'origine-
De : Marco Gaiarin
Envoyé : mardi 22 août 2023 14:00
À : bacula-users@lists.sourceforge.net
Objet : [Bacula-users] Baculum and disable job...
I'm using Bacula 9.5 with bacu
Hi Lorraine,
That's great news. Thanks for letting us know that it started working on
the new vm.
Best regards,
Marcin Haba (gani)
On Thu, 3 Aug 2023 at 07:43, Lorraine
wrote:
> Hi Marcin, I have ended up blowing away the vm and starting over. This
> has allowed me to progress with the Instal
Hi Marcin, I have ended up blowing away the vm and starting over. This has
allowed me to progress with the Install Wizard and I am no longer getting the
errors.
Thanks again for all your help. Not sure where I went wrong but just glad that
I am able to move past this issue.
Regards
Lorraine
Hi Marcin, please see below output:
[root@nbipbac12 httpd]# sudo -u apache sudo -l
Matching Defaults entries for apache on nbipbac12:
!visiblepw, always_set_home, match_group_by_gid, always_query_group_plugin,
env_reset, env_keep="COLORS DISPLAY HOSTNAME HISTSIZE KDEDIR LS_COLORS",
env_keep
Hello Lorraine,
It is interesting. Thanks for your feedback. Internally to connect to
bconsole Bacularis does the same as this shell command does (adapted to
your problem):
# sudo -u apache sudo /opt/bacula/bin/bconsole
The 'sudo -u apache' switches user to 'apache' user to be the same user as
P
Morning Marcin, Thank you for the update.
I tried the alternate sudo entry but still had no luck. I also set
"SELINUX=disabled” in /etc/selinux/config but nothing seems to get past this
error.
I will continue to troubleshoot and let you know if I find anything.
Regards
Lorraine
> On 3 Aug 2
Hello Lorraine,
In your Bacularis sudoers file you use switching from apache user to bacula
user. It is correct but unfortunately Bacularis does not support it. To
work with this setting Bacularis needs to know about bacula user and use
internally "sudo -u bacula" sudo parameter to let know sudo a
Hi, Yes I installed the following:
[root@nbipbac12 bin]# yum list installed | grep bacularis-selinux
bacularis-selinux.noarch 2.1.2-1.el8
@bacularis-app
Regards
Lorraine
> On 2 Aug 2023, at 6:16 pm, Marcin Haba wrote:
Hello Lorraine,
Thanks for the details about your installation.
This error is a permission problem. Please make sure that you installed the
bacularis-selinux package if you have SELinux enabled in your system. Did
you install it?
Best regards,
Marcin Haba (gani)
On Wed, 2 Aug 2023 at 08:07, Lor
Hello Lorraine,
We don't provide rpm packages for CentOS 7 because in the system repos it
does not have PHP >= 7.4. There is an old PHP 5.4. If you will be able to
install on CentOS 7 host PHP >= 7.4 or greater (for example from REMI
repository) then you can install Bacularis by Composer and it wi
Hello Marcin,
Thank you for your help. Looks like bacularis needs to be installed alongside
bacula ( on the same machine ) is this assumption correct? Also, do you know
if there is a bacularis release for linux 7.9?
Regards
Lorraine
> On 1 Aug 2023, at 4:49 pm, Marcin Haba wrote:
>
> Hell
Hello Lorraine,
Great. For troubleshooting usually it is good to visit the Bacularis
documentation and the "Troubleshooting" chapter here:
https://bacularis.app/doc/brief/troubleshooting.html
Good luck.
Best regards,
Marcin Haba (gani)
On Tue, 1 Aug 2023 at 06:37, Lorraine
wrote:
> Thank you
Thank you Marcin
I am currently troubleshooting install of Bacularis so hopefully I can use this
tool instead
Regards
Lorraine
> On 31 Jul 2023, at 7:10 pm, Marcin Haba wrote:
>
> Hello Lorraine,
>
> About a month ago I ported from Bacularis a change to enable PostgreSQL 15
> support in Bac
Hello Lorraine,
About a month ago I ported from Bacularis a change to enable PostgreSQL 15
support in Baculum. Unfortunately there has not been released any Baculum
version with this change yet.
So, please wait on the new Baculum release or use Bacularis.
Best regards,
Marcin Haba (gani)
On Mon
ards
>
> Yakup Kaya
>
> IT Engineer
>
>
> Phone: +49 (0)7541 / 282-192
>
> www.indra-avitech.aero
>
>
>
>
> From: Marcin Haba
> Sent: Saturday, July 15, 2023 20:34
> To: Yakup Kaya
> Cc: bacula-users@lists.so
ch.aero<http://www.indra-avitech.aero/>
From: Marcin Haba
Sent: Saturday, July 15, 2023 20:34
To: Yakup Kaya
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Baculum Dashboard is too slow on remote vpn
connection
Hello Yakup,
Thanks for yo
; Yakup Kaya
>
>
>
> From: Yakup Kaya
> Sent: Friday, July 14, 2023 07:37
> To: Marcin Haba
> Cc: bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] Baculum Dashboard is too slow on remote vpn
> connection
>
>
> Hi M
Subject: Re: [Bacula-users] Baculum Dashboard is too slow on remote vpn
connection
Hi Marcin,
Thanks a lot for your answer. I will have a look at compression, and share my
results from here. For the number of jobs listed, I already use 100 (default
was 15000), but in my case it does not change
cula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Baculum Dashboard is too slow on remote vpn
connection
Hello Yakup,
You can try to enable compression in your web server. Here you can see
how it can be done for Apache using mod_deflate module:
https://httpd.apache.org/docs/2.4/mod/mod_deflate.
Hello Yakup,
You can try to enable compression in your web server. Here you can see
how it can be done for Apache using mod_deflate module:
https://httpd.apache.org/docs/2.4/mod/mod_deflate.html
Also, what can speed up the process of loading pages, you can limit
the number of jobs loaded to the
Hello everybody,
On Baculum interface, I have a performance issue on slow remote connections (it
is fast on the local machine). Sometimes it takes around 5 minutes for the
Dashboard to load completely. With inspect element option on Firefox, I noticed
jquery.js is getting 26.65MB of data and i
Hello Chris,
Yes, something had to be wrong in the Bvfs cache. Good to hear that you
solved it by clearing it.
Best regards,
Marcin Haba (gani)
On Sat, 27 May 2023 at 22:45, Chris Wilkinson
wrote:
> I answered my own question when I remembered an old post by Marcin on a
> similar issue. The an
I answered my own question when I remembered an old post by Marcin on a
similar issue. The answer there was to clear the bvfs cache with
"clear_bvfs_cache yes" in bconsole. This had the desired effect.
-Chris-
On Fri, 26 May 2023, 20:45 Chris Wilkinson, wrote:
> When I use the restore wizard an
Hello Chris,
Yes, it is.
To read Bacula configs Baculum uses the Bacula JSON tools. These tools
return values in seconds. If in the future they will support units, Baculum
and Bacularis will support it too.
Best regards,
Marcin Haba (gani)
On Wed, 3 May 2023 at 17:03, Chris Wilkinson wrote:
>
Ok cool,
great thanks,
De : Marcin Haba
Envoyé : lundi 1 mai 2023 13:54
À : Lionel PLASSE
Cc : bacula-users@lists.sourceforge.net
Objet : Re: [Bacula-users] Baculum UI tweak : adding columns to volume page view
Hello Lionel,
I added this function to Bacularis.
Later I ported it to Baculum
Hello Lionel,
I added this function to Bacularis.
Later I ported it to Baculum:
https://gitlab.bacula.org/bacula-community-edition/bacula-community/-/commit/f867ed2732d10cbb0e789341fd37a3f905b7db51
Now in the application settings (under gearwheel icon at the top left part
of the interface) are
Hello Lionel,
The table settings are remembered for 2 hours.
I think that your idea is good to have an option to switch table settings
to persistent.
I will try to add it in the near future. I will let know in this thread too
when it is ready.
Thanks.
Best regards,
Marcin Haba (gani)
On Fri,
It worked, thank you Marcin.
On 09/03/2023 19:13, Marcin Haba wrote:
Hello Adam,
Thanks for your detailed report.
Described behavior is not dangerous but I agree that it is not too
natural. It will be fixed in the next release.
For now if you want you can try a patch. I am sending it in att
: bacula-users
Objet : Re: [Bacula-users] Baculum 11.6 Adding new section block or File/Dir
Field error
Hello Lionel,
This is a bug that is fixed in Branch-13.0 starting from version 13.0.0.
https://gitlab.bacula.org/bacula-community-edition/bacula-community/-/commit
Hello Lionel,
This is a bug that is fixed in Branch-13.0 starting from version 13.0.0.
https://gitlab.bacula.org/bacula-community-edition/bacula-community/-/commit/b706fe1929ae5655eb0899392101f93713e4dffc
Best regards,
Marcin Haba (gani)
On Fri, 10 Mar 2023 at 10:16, Lionel PLASSE wrote:
> He
Hello Adam,
Thanks for your detailed report.
Described behavior is not dangerous but I agree that it is not too natural.
It will be fixed in the next release.
For now if you want you can try a patch. I am sending it in attachment. It
should help for this problem.
Best regards,
Marcin Haba (gani
Hello d09,
Yes, you can. In the documentation is written for the local user
authentication:
"This type of authentication is realized by HTML form in the Baculum Web.
Once this method is enabled, the web server basic authentication can be
disabled."
Best regards,
Marcin Haba (gani)
On Sun, 5 Feb
How do I enable "local user" authentication so I can disable the
apache-based authentication? The docs don't say.
---
On 2/5/2023 6:44 AM, Marcin Haba wrote:
Hello Marco,
Thanks for confirmation and for the idea to add to the documentation
information about disabling the basic authenticat
Hello Marco,
Thanks for confirmation and for the idea to add to the documentation
information about disabling the basic authentication.
I have added it:
https://baculum.app/doc/brief/configuration.html#baculum-web
Best regards,
Marcin Haba (gani)
On Fri, 3 Feb 2023 at 15:07, Marco Gaiarin wro
Mandi! Marcin Haba
In chel di` si favelave...
> If you use LDAP authentication, all this Apache block with Basic auth can be
> removed. In this place you can write:
>
> # Apache 2.4
>
>
> Require all granted
>
>
Bingo! It worked!
Can be written somewhhere, eg
Hello Marco,
If you use LDAP authentication, all this Apache block with Basic auth can
be removed. In this place you can write:
# Apache 2.4
Require all granted
Good luck.
Best regards,
Marcin Haba (gani)
On Tue, 31 Jan 2023 at 22:43, Marco Gaiarin wrote:
>
>
Hello d09,
Thanks for reporting missing Oracle Linux packages. They have been built
and they are available for OL 8 and 9. You can read about it in this
announcement:
https://bacularis.app/news/42/36/Bacularis-package-repository-for-Oracle-Linux-8-and-9/d,Bacularis%20news%20details
The repositor
Excellent. One more thing. I am looking at the Bacularis packages for
the different distros. I noticed there aren't ones specifically for
ol/rhel 8 and 9. Will there be? We run Oracle Linux 8 (ol8) and will
be upgrading to ol9. Since Bacularis doesn't contain any binaries,
can/should I
Hello d09,
Baculum and Bacularis can coexist on the same host out of the box. There is
not any barrier for that. More information about it you can find here:
https://bacularis.app/doc/brief/installation.html#bacularis-installation-on-host-with-baculum
Best regards,
Marcin Haba (gani)
On Wed, 7
Thanks for the info. I will give Bacularis a test-drive. Any reason
why I couldn't or shouldn't install Bacularis on the same webserver
where I have Baculum 11 running?
---
On 12/5/2022 9:05 PM, Marcin Haba wrote:
Hello d09,
Baculum and Bacularis are two different projects with different
Hello d09,
Baculum and Bacularis are two different projects with different
assumptions. It is true that Bacularis provides more functions and it is
developed faster than Baculum, but in my opinion it is a bit too early to
say about replacing Baculum by Bacularis. I don't know what will be in the
f
Hello Agiofws,
It depends what Baculum functions you are going to use. Baculum API
provides the following functions:
- catalog access
- bconsole access
- Bacula configuration
- component actions (start/stop/restart)
For the catalog and bconsole you can install Baculum API on any host with
co
Hello Agiofws,
If I understood you well, you have Bacula 9.6 and you would like to use
Baculum 11 with it. Answer for this question you can find in the
documentation:
"
Baculum 11.0 works with Bacula < 11.0 but two file list specific functions
does not work:
- searching jobs by filename in the
Hello Nick,
The option that you need to use is placed at the same page as the LDAP
settings, but at the top. It is:
"Default access setting for logged in users not defined in Baculum Web:"
If you select a radio button with label "No access", then only users
imported to Baculum Web will be able t
Hello Karl,
Thanks for providing the debug log.
You are trying to restore the file "Screencast_2021-06-25_15:10:14.webm".
The command responsible for creating the temporary Bvfs table for this
restore fails with the following error message "Can't create restore list":
[0] => .bvfs_re
Hi Marcin !
Thanks for your help, i have generated and a log from the
failing request, posted here:
https://pastebin.com/EUXemHZM
Do you see anything obvious in there ?
Cheers,
KK
Am Montag, dem 14.11.2022 um 04:55 +0100 schrieb Marcin Haba:
> Hello Karl,
>
> The problem here is because from
Hello Karl,
The problem here is because from some reason the Bvfs temporary table
'b25796' has not been created. The bconsole command that creates this
temporary table is .bvfs_restore.
To see the problem, I would propose to enable debug in the Baculum API,
then do a restore try once again and ch
Hello Magdalena,
Thanks for the next tries.
It looks a bit strange that in the same window session where you create the
fileset you are able to see all content to restore. Also interesting is
that in the manual test with bconsole you can see Bvfs content but in the
web browser you can see this co
Hello Marcin,
No errors. I've tried a new browser with no extensions and the same result
- nothing visible. Another thing is, when creating a new FileSet and I have
the same kind of window with active directories choosing, I can see
everything.
Latest discovery: in the restore page, initially i
Hello Magdalena,
Thanks for providing the outputs. They look correct. So, maybe let's look
at the problem from the opposite side.
Could you look at the javascript console in the web browser when you go
through the file browser in the restore wizard? Usually it is available
after clicking F12, the
Hi Marcin,
thank you for your rapid answer.
bconsole output:
# this one seems to be correct, indeed should be "etc"
*.bvfs_lsdirs jobid="24" pathid="768" limit="2000"
768 0 0 0 A A A A A A A A A A A A A A .
771 0 0 0 A A A A A A A A A A A A A A ..
3 0 41166 24 P0A M EHt BZ A A A BAA BAA I BjaM
Hello Magdalena,
Your command outputs look to be correct. Could you also show us debug from
clicking on the / (root directory) action in the restore wizard?
Baculum in the restore wizard uses Bvfs cache to list directories/files
from backup. The bconsole commands below can help to see if it is so
Hello Chris,
The schedule status in Baculum does exactly the same as the status schedule
command in bconsole. Baculum uses this command to display the schedule
status pages. Currently it displays scheduled jobs day by day. If one day
this command will stop displaying finished jobs, Baculum will st
Hello Gina,
This error means that Baculum API is not able to write to the Baculum
working directory that you defined in the fourth API wizard step.
You need to extend permissions for this directory that Baculum API will be
able to write there. Once it is done I would propose to go through this
wi
Hello Chris,
Thanks for your test and feedback.
For this division error now I am seeing it on my side too. Thanks for the
offer sending API and Web logs. Since I am able to reproduce it, the logs
are not needed.
I will try to fix it in the near future.
Best regards,
Marcin Haba (gani)
On Sat,
Hello Marcin
The patch was applied successfully and now I am able to set a volume max bytes
to larger values (>4GB) and the save is OK.
However there is now another error when I click on the details of the pool.
DivisionByZeroError
Description
Modulo by zero
Source File
/var/www/baculum/pro
Hello Chris,
You can copy the patch to this directory:
/var/www/baculum/protected/API/Class/
and then go to this directory:
cd /var/www/baculum/protected/API/Class/
check if patch is applying:
patch -p6 --dry-run < baculum_fix_save_resource_32bit.patch
and if yes then finally run:
patch -p6
When I look at this patch, it seems to be for a tree that doesn't match
what I have.
The file to be patched is located at
/var/www/baculum/protected/API/Class/.. in my tree. Do I need to drop the
'gui' in the patch?
I am on v9.6.7
My knowledge of patching is sketchy at best so would it possible
Marcin, thank you, I actually found later on where to edit it in Baculum.
> On 16. Mar 2022, at 07:22, Marcin Haba wrote:
>
> Hello Justin,
>
> Could you tell us what is the problem with JobDefs? I am asking about it
> because I am not sure if you don't know where to edit JobDefs or you receiv
Thank you Marcin for this patch. I’d expected it to be a lot more complicated
than that. I’ll check it out and let you know.
Best
-Chris-
> On 16 Mar 2022, at 06:17, Marcin Haba wrote:
>
>
___
Bacula-users mailing list
Bacula-users@lists.sourcef
Hello Justin,
Could you tell us what is the problem with JobDefs? I am asking about it
because I am not sure if you don't know where to edit JobDefs or you
receive an error when you save JobDefs. If it is an error, could you paste
the output here?
Thanks in advance for additional information.
Be
Hello Chris,
I prepared a patch that should solve this issue. You can find it in the
attachment. It is for 9.6.x versions.
The issue in this case is maximum value of 32-bit integer.
Best regards,
Marcin Haba (gani)
On Tue, 15 Mar 2022 at 11:21, Chris Wilkinson
wrote:
> Yes, Raspbian is 32 bit
Yes, Raspbian is 32 bit but I understand that a 64 bit version has been
released recently. That may be the best option for me as probably very few
would want to use Bacula on a 32 bit environment and it would be too much
work to port Baculum.
Bacula btw runs perfectly.
I'd be interested to know w
Hello Chris,
It looks you are using 32-bit environment. I will check what can be done
here from the Baculum side. I will let know soon.
Best regards,
Marcin
On Mon, 14 Mar 2022 at 23:46, Chris Wilkinson
wrote:
> I wondered if this behaviour might be due to using an older version of
> bdirjson
1 - 100 of 396 matches
Mail list logo
