Hi,
27.11.2009 10:18, Juergen Koch wrote:
> OK, I forget the versions:
>
> bacula-sd: 2.4.4
> bacula-dir 2.4.4
You should plan an upgrade, although 2.4 is still ok IMO.
>
> Juergen Koch schrieb:
>> Hello,
>>
>> I think, I do not have a problem in my configuration.
I think you do :-)
See belo
OK, I forget the versions:
bacula-sd: 2.4.4
bacula-dir 2.4.4
Juergen Koch schrieb:
> Hello,
>
> I think, I do not have a problem in my configuration.
> I can load tapes into drive two with the mtx-script.
> The parameters, which are send the mount-command to the mtx-script
> imply ever the /dev
Hello,
I think, I do not have a problem in my configuration.
I can load tapes into drive two with the mtx-script.
The parameters, which are send the mount-command to the mtx-script
imply ever the /dev/nst0 and the drive-index 0.
And bacule works fine with the first drive.
My autochanger config:
Hello,
26.11.2009 16:31, Juergen Koch wrote:
> I use a autochanger with bacula on debian/lenny.
> The changer has two drives and I can load tapes into the drives using
> the mtx-script:
>
> mtx-changer /dev/sg4 load 2 /dev/nst1 1
>
> But, the mount-command use only the default tape values:
>
>
I use a autochanger with bacula on debian/lenny.
The changer has two drives and I can load tapes into the drives using
the mtx-script:
mtx-changer /dev/sg4 load 2 /dev/nst1 1
But, the mount-command use only the default tape values:
-
*mount
Automatically selected Catalog: MyCatalog
Using Ca
