Mandi! Bill Arlofski via Bacula-users
In chel di` si favelave...
> Nope... You want to disable the drive in bconsole.
Again, thanks!
I make a note: i've not found a place in Bacula docs where the
'disable storage' command have some docs...
--
_
Oh! Just one more note...
I wrote:
8<
*disable storage=mhvtl-waa_a-Autochanger drive=0
8<
I meant to mention that the '0' in the 'drive=0' command line option is the SD's Drive Device's "DriveIndex" number, so of
course it might be 1, 2 or whatever. :)
Drives are zero indexed,
On 8/27/24 8:29 AM, Marco Gaiarin wrote:
Mandi! Bill Arlofski via Bacula-users
In chel di` si favelave...
You cannot tell Bacula to load a cleaning tape without experiencing
these kinds of errors, because when the SD is told to
load a tape from a slot into a drive, the 'mtx-changer' script c
Mandi! Bill Arlofski via Bacula-users
In chel di` si favelave...
> You cannot tell Bacula to load a cleaning tape without experiencing
> these kinds of errors, because when the SD is told to
> load a tape from a slot into a drive, the 'mtx-changer' script calls the
> 'mtx' utility to load, the
On 8/27/24 1:44 AM, Arno Lehmann wrote:
Hi all,
just one tiny addition -- you may want to change the "Maximum Changer
Wait" time if you want to use tape cleaning with Bill's script, because
the additional activity naturally needs some time. And having jobs that
already used a lot of time and tap
Hi all,
just one tiny addition -- you may want to change the "Maximum Changer
Wait" time if you want to use tape cleaning with Bill's script, because
the additional activity naturally needs some time. And having jobs that
already used a lot of time and tape capacity fail just because the tape
The ideal is always to clean the disk from the web-gui software of the tape
library.
with the SD stop
On Mon, Aug 26, 2024 at 4:42 PM Marco Gaiarin
wrote:
>
> I've setup in my pool(s) the 'Cleaning Prefix' and addedd to the library
> the
> cleaning tape; situation now is:
>
> *update slots st
On 8/26/24 8:20 AM, Marco Gaiarin wrote:
I've setup in my pool(s) the 'Cleaning Prefix' and addedd to the library the
cleaning tape; situation now is:
*update slots storage=CNPVE3Autochanger
Connecting to Storage daemon CNPVE3Autochanger at cnpve3.cn.lnf.it:9103 ...
3306 Issuing autochang
I've setup in my pool(s) the 'Cleaning Prefix' and addedd to the library the
cleaning tape; situation now is:
*update slots storage=CNPVE3Autochanger
Connecting to Storage daemon CNPVE3Autochanger at cnpve3.cn.lnf.it:9103 ...
3306 Issuing autochanger "slots" command.
Device "Autochanger" has
