Hi,
After replacing drive and bought new tapes, the backup using tar succeed
ok,
the btape test also succeeded ok.
but when I use btape fill test it stops after 20GB claiming end of tape,
this is the error/message
Wrote block=30, file,blk=20,5499 VolBytes=19,353,535,488 rate=18.53
Hi,
After replacing drive and bought new tapes, the backup using tar succeed
ok,
the btape test also succeeded ok.
but when I use btape fill test it stops after 20GB claiming end of tape,
this is the error/message
Wrote block=30, file,blk=20,5499 VolBytes=19,353,535,488 rate=18.53
Hello,
Again: Did you tested your tape drive with btape utility? For me it is a
misconfigured storage device.
best regards
2015-09-24 19:54 GMT+02:00 ADCD Support :
> I use 64bits system.
> I tried with other version of file daemon but still the same, stopped
> after 20GB
>
> 24-Sep 18:46 buffe
I use 64bits system.
I tried with other version of file daemon but still the same, stopped
after 20GB
24-Sep 18:46 buffer-bacula-sd JobId 121: Fatal error: Unable to write EOF.
ERR=dev.c:1551 ioctl MTWEOF error on "DTL01" (/dev/nst0). ERR=Input/output
error.
24-Sep 18:46 buffer-bacula-sd
Hello,
The recommendation for Bacula versions are:
director = storage daemon >= file daemon
It seems you have your director and storage daemon running 5.2.5 version
and client running 5.2.10. Also, is your system 32 or 64 bits?
Best regards,
Ana
On Tue, Sep 22, 2015 at 2:48 AM, Radosław Korzen
Hello
Did you tested your tape drive with btape utility? What was a result of the
test?
best regards
2015-09-20 18:00 GMT+02:00 ADCD IT :
> Hi Everyone,
>
> I have issue writing to my tapes.
>
> I have an HP tape library connected to ubuntu 12.04 with bacula 5.2.5
> installed.
> when I am runni
Hi Everyone,
I have issue writing to my tapes.
I have an HP tape library connected to ubuntu 12.04 with bacula 5.2.5
installed.
when I am running a full backup job on any client or with any tape (tapes
are new, so its not tape issue)
the job stops in the middle after the SD wrote about 20GB t
