Hello,
The recommendation for Bacula versions are:
director = storage daemon >= file daemon
It seems you have your director and storage daemon running 5.2.5 version
and client running 5.2.10. Also, is your system 32 or 64 bits?
Best regards,
Ana
On Tue, Sep 22, 2015 at 2:48 AM, Radosław Korzeniewski <
rados...@korzeniewski.net> wrote:
> Hello
>
> Did you tested your tape drive with btape utility? What was a result of
> the test?
>
> best regards
>
> 2015-09-20 18:00 GMT+02:00 ADCD IT <adcd...@gmail.com>:
>
>> Hi Everyone,
>>
>> I have issue writing to my tapes.
>>
>> I have an HP tape library connected to ubuntu 12.04 with bacula 5.2.5
>> installed.
>> when I am running a full backup job on any client or with any tape (tapes
>> are new, so its not tape issue)
>> the job stops in the middle after the SD wrote about 20GB than mark the
>> tape as FULL and throw those errors:
>>
>> 19-Sep 16:53 buffer-bacula-dir JobId 108: Start Backup JobId 108,
>> Job=cow-bj.2015-09-19_16.53.18_08
>> 19-Sep 16:53 buffer-bacula-dir JobId 108: Using Device "DTL01"
>> 19-Sep 16:53 buffer-bacula-sd JobId 108: Wrote label to prelabeled Volume
>> "TAPE05L5" on device "DTL01" (/dev/nst0)
>> 19-Sep 16:55 cow-fd JobId 108: Generate VSS snapshots. Driver="Win32 VSS",
>> Drive(s)="CD"
>> 19-Sep 20:22 buffer-bacula-sd JobId 108: Fatal error: Unable to write EOF.
>> ERR=dev.c:1551 ioctl MTWEOF error on "DTL01" (/dev/nst0). ERR=Input/output
>> error.
>>
>> 19-Sep 20:22 buffer-bacula-sd JobId 108: Error: Error writing final EOF to
>> tape. This Volume may not be readable.
>> dev.c:1551 ioctl MTWEOF error on "DTL01" (/dev/nst0). ERR=Input/output
>> error.
>> 19-Sep 20:22 buffer-bacula-sd JobId 108: Job write elapsed time =
>> 03:29:04, Transfer rate = 1.990 M Bytes/second
>> 19-Sep 20:24 cow-fd JobId 108: Error: lib/bsock.c:429 Write error sending
>> 65536 bytes to Storage daemon:192.168.0.70:9103: ERR=Input/output error
>> 19-Sep 20:24 cow-fd JobId 108: Fatal error: filed/backup.c:1194 Network
>> send error to SD. ERR=Input/output error
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "System
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "MSDEWriter",
>> State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "IIS Metabase
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "Registry
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "Event Log
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "COM+ REGDB
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "WMI Writer",
>> State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:24 cow-fd JobId 108: VSS Writer (BackupComplete): "BITS Writer",
>> State: 0x1 (VSS_WS_STABLE)
>> 19-Sep 20:23 buffer-bacula-dir JobId 108: Error: Bacula buffer-bacula-dir
>> 5.2.5 (26Jan12):
>> Build OS: x86_64-pc-linux-gnu ubuntu 12.04
>> JobId: 108
>> Job: cow-bj.2015-09-19_16.53.18_08
>> Backup Level: Full
>> Client: "cow" 5.2.10 (28Jun12) Microsoft Windows Home
>> ServerStandard Edition Service Pack 2 (build 3790),Cross-compile,Win32
>> FileSet: "cow" 2015-09-07 02:00:04
>> Pool: "Main" (From Job resource)
>> Catalog: "MyCatalog" (From Client resource)
>> Storage: "HPTapeLibrary" (From Job resource)
>> Scheduled time: 19-Sep-2015 16:53:15
>> Start time: 19-Sep-2015 16:53:21
>> End time: 19-Sep-2015 20:23:34
>> Elapsed time: 3 hours 30 mins 13 secs
>> Priority: 10
>> FD Files Written: 250,664
>> SD Files Written: 250,650
>> FD Bytes Written: 24,929,269,562 (24.92 GB)
>> SD Bytes Written: 24,974,983,634 (24.97 GB)
>> Rate: 1976.5 KB/s
>> Software Compression: None
>> VSS: yes
>> Encryption: no
>> Accurate: no
>> Volume name(s): TAPE05L5
>> Volume Session Id: 1
>> Volume Session Time: 1442506946
>> Last Volume Bytes: 24,998,400,000 (24.99 GB)
>> Non-fatal FD errors: 1
>> SD Errors: 2
>> FD termination status: Error
>> SD termination status: Error
>> Termination: *** Backup Error ***
>>
>>
>> if I try to change the tape from FULL to APPEND and run the job again on
>> the previously written tape, this is the error I am getting:
>>
>> 20-Sep 10:53 buffer-bacula-dir JobId 109: Start Backup JobId 109,
>> Job=cow-bj.2015-09-20_09.52.20_20
>> 20-Sep 10:53 buffer-bacula-dir JobId 109: Using Device "DTL01"
>> 20-Sep 10:54 buffer-bacula-sd JobId 109: Volume "TAPE05L5" previously
>> written, moving to end of data.
>> 20-Sep 11:10 buffer-bacula-sd JobId 109: Error: Unable to position to end
>> of data on device "DTL01" (/dev/nst0): ERR=dev.c:763 ioctl MTEOM error on
>> "DTL01" (/dev/nst0). ERR=Input/output error.
>>
>> 20-Sep 11:10 buffer-bacula-sd JobId 109: Marking Volume "TAPE05L5" in
>> Error in Catalog.
>> 20-Sep 11:10 buffer-bacula-sd JobId 109: 3307 Issuing autochanger "unload
>> slot 1, drive 0" command.
>> 20-Sep 11:12 buffer-bacula-sd JobId 109: 3301 Issuing autochanger "loaded?
>> drive 0" command.
>> 20-Sep 11:12 buffer-bacula-sd JobId 109: 3302 Autochanger "loaded? drive
>> 0", result: nothing loaded.
>> 20-Sep 11:12 buffer-bacula-sd JobId 109: 3304 Issuing autochanger "load
>> slot 2, drive 0" command.
>> 20-Sep 11:13 buffer-bacula-sd JobId 109: 3305 Autochanger "load slot 2,
>> drive 0", status is OK.
>> 20-Sep 11:13 buffer-bacula-sd JobId 109: Wrote label to prelabeled Volume
>> "TAPE06L5" on device "DTL01" (/dev/nst0)
>> 20-Sep 11:15 cow-fd JobId 109: Generate VSS snapshots. Driver="Win32 VSS",
>> Drive(s)="CD"
>> 20-Sep 13:54 buffer-bacula-sd JobId 109: Error: block.c:577 Write error at
>> 19:14135 on device "DTL01" (/dev/nst0). ERR=Input/output error.
>> 20-Sep 13:59 buffer-bacula-sd JobId 109: Error: Error writing final EOF to
>> tape. This Volume may not be readable.
>> dev.c:1551 ioctl MTWEOF error on "DTL01" (/dev/nst0). ERR=Input/output
>> error.
>> 20-Sep 13:59 buffer-bacula-sd JobId 109: End of medium on Volume
>> "TAPE06L5" Bytes=19,910,661,120 Blocks=308,634 at 20-Sep-2015 13:59.
>> 20-Sep 13:59 buffer-bacula-sd JobId 109: 3307 Issuing autochanger "unload
>> slot 2, drive 0" command.
>> 20-Sep 14:02 buffer-bacula-sd JobId 109: 3301 Issuing autochanger "loaded?
>> drive 0" command.
>> 20-Sep 14:02 buffer-bacula-sd JobId 109: 3302 Autochanger "loaded? drive
>> 0", result: nothing loaded.
>> 20-Sep 14:02 buffer-bacula-sd JobId 109: 3304 Issuing autochanger "load
>> slot 3, drive 0" command.
>> 20-Sep 14:03 buffer-bacula-sd JobId 109: 3305 Autochanger "load slot 3,
>> drive 0", status is OK.
>> 20-Sep 14:03 buffer-bacula-sd JobId 109: Wrote label to prelabeled Volume
>> "TAPE07L5" on device "DTL01" (/dev/nst0)
>> 20-Sep 14:03 buffer-bacula-sd JobId 109: New volume "TAPE07L5" mounted on
>> device "DTL01" (/dev/nst0) at 20-Sep-2015 14:03.
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "System
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "MSDEWriter",
>> State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "IIS Metabase
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "Event Log
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "BITS Writer",
>> State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "COM+ REGDB
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "Registry
>> Writer", State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:53 cow-fd JobId 109: VSS Writer (BackupComplete): "WMI Writer",
>> State: 0x1 (VSS_WS_STABLE)
>> 20-Sep 15:52 buffer-bacula-sd JobId 109: Job write elapsed time =
>> 04:34:57, Transfer rate = 2.152 M Bytes/second
>> 20-Sep 15:53 buffer-bacula-dir JobId 109: Bacula buffer-bacula-dir 5.2.5
>> (26Jan12):
>> Build OS: x86_64-pc-linux-gnu ubuntu 12.04
>> JobId: 109
>> Job: cow-bj.2015-09-20_09.52.20_20
>> Backup Level: Full
>> Client: "cow" 5.2.10 (28Jun12) Microsoft Windows Home
>> ServerStandard Edition Service Pack 2 (build 3790),Cross-compile,Win32
>> FileSet: "cow" 2015-09-07 02:00:04
>> Pool: "Main" (From Job resource)
>> Catalog: "MyCatalog" (From Client resource)
>> Storage: "HPTapeLibrary" (From command line)
>> Scheduled time: 20-Sep-2015 10:53:39
>> Start time: 20-Sep-2015 10:53:42
>> End time: 20-Sep-2015 15:53:52
>> Elapsed time: 5 hours 10 secs
>> Priority: 10
>> FD Files Written: 318,022
>> SD Files Written: 318,022
>> FD Bytes Written: 35,442,904,385 (35.44 GB)
>> SD Bytes Written: 35,505,180,848 (35.50 GB)
>> Rate: 1968.0 KB/s
>> Software Compression: None
>> VSS: yes
>> Encryption: no
>> Accurate: no
>> Volume name(s): TAPE06L5|TAPE07L5
>> Volume Session Id: 2
>> Volume Session Time: 1442506946
>> Last Volume Bytes: 15,627,257,856 (15.62 GB)
>> Non-fatal FD errors: 0
>> SD Errors: 3
>> FD termination status: OK
>> SD termination status: OK
>> Termination: Backup OK -- with warnings
>>
>>
>>
>> this is the SD configuration:
>> Device {
>> Name = "DTL01"
>> Description = "HPTapeLibrary - first drive"
>> Media Type = LTO-5
>> Archive Device = /dev/nst0
>>
>> Autochanger = yes
>> Drive Index = 0
>>
>> #Hardware End of Medium = no
>> # BSF at EOM = no
>> # Backward Space Record = no
>> # Fast Forward Space File = no
>> # TWO EOF = no
>>
>> Spool Directory = /home/bacula/spooling-lib
>> Maximum Spool Size = 11759496889
>> Maximum Job Spool Size = 11759496889 # 10GB
>> AlwaysOpen = no
>> Random access = no
>>
>> # Minimum Block Size = 262144
>> # Maximum Block Size = 262144
>> }
>> Autochanger {
>> Name = MSL2024
>> Device = "DTL01"
>> # Device = Drive-2
>> Description = "HP MSL024."
>> Changer Device = /dev/sg3
>> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
>> }
>>
>> the backup succeed but with two new volumes(tapes), but it should succeed
>> with one tape
>> the tape is LTO5 1.5T capacity so I don't understand why it stops around
>> 20GB and also can't position to the end of data for previously written
>> tape.
>> I cleaned the drive several times but it still occurs, any idea what the
>> cause? hardware issue? software issue?
>>
>> Kind Regards,
>> Roi,
>>
>>
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> Bacula-users mailing list
>> Bacula-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>
>
>
> --
> Radosław Korzeniewski
> rados...@korzeniewski.net
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
