On 3/6/23 11:08, Don Hammer wrote:
Hello Don, sorry for my delay and thank you for the information you provided.
OK, going back a bit.
You Jobs are asking for a new volume:
8<
harorbu01-sd JobId 299: Job Spice01.2023-03-05_02.00.01_38 is waiting. Cannot
find any appendable volumes.
-
sers@lists.sourceforge.net
Subject: Re: [Bacula-users] Help with configuration
On 2/28/23 15:02, Don Hammer wrote:
>
>
> 3306 Issuing autochanger "slots" command.
>
> Device "HP_SureStore" has 8 slots.
>
> Connecting to Storage daemon harorbu01-sd at 192.168.1.16
On 2/28/23 15:02, Don Hammer wrote:
3306 Issuing autochanger "slots" command.
Device "HP_SureStore" has 8 slots.
Connecting to Storage daemon harorbu01-sd at 192.168.1.16:9103 ...
3306 Issuing autochanger "list" command.
Slot | Volume Name | Status | Media Type | Pool
ge.net>>
Subject: RE: [Bacula-users] Help with configuration
I have the tapes labeled and when I run status slots it results in.
The defined Storage resources are:
1: File1
2: harorbu01-sd
Select Storage resource (1-2): 2
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatal
Hello Don,
If you have correctly configured the tape library with the tape drives,
Bacula should be able to automatically load/unload labeled tapes.
You need to label the tapes before using them for backup jobs. The bconsole
command to label tapes using barcodes:
* label barcodes
You can check
I am looking for some assistance with my new configuration. I am using Bacula
with Bacularis
I have a HP LTO library that I can control to load unload and mount tapes
I have a weekly pool defined that I am running the backup on and volumes
labeled and assigned to the pool
I have a scheduled job t
I hope someone can help me with my customer configuration.I tried all the possible switches to handle my LTO config.The LTO is a single tape device, with manual substituion (no library).Day by day I am never sure the software will have done its job correctly, and the customer is getting really an
