Re: [Bacula-users] Bacula setup driving me nuts

2011-08-25 Thread John Drescher
On Thu, Aug 25, 2011 at 10:59 AM, wrote: > In the message dated: Thu, 25 Aug 2011 05:44:00 EDT, > The pithy ruminations from John Drescher on > were: > => On Thu, Aug 25, 2011 at 2:19 AM, selanty > wrote: > => > That is good now test the bacula > => > > => > mtx-changer > => > > => > Pf th

Re: [Bacula-users] Bacula setup driving me nuts

2011-08-25 Thread John Drescher
On Thu, Aug 25, 2011 at 2:19 AM, selanty wrote: > That is good now test the bacula > > mtx-changer > > Pf thx guys thru testing with mtx-changer i solved my problem >  [Rolling Eyes] finaly i ended up switching the cabels at the back off the > backup unit. > needed to make from sg5 sg4 and it

[Bacula-users] Bacula setup driving me nuts

2011-08-24 Thread selanty
That is good now test the bacula mtx-changer Pf thx guys thru testing with mtx-changer i solved my problem [Rolling Eyes] finaly i ended up switching the cabels at the back off the backup unit. needed to make from sg5 sg4 and it worked. Stupid me. Thx for the help. Marcel +-

[Bacula-users] Bacula setup driving me nuts

2011-08-24 Thread selanty
That is good now test the bacula mtx-changer Pf thx guys thru testing with mtx-changer i solved my problem [Rolling Eyes] finaly i ended up switching the cabels at the back off the backup unit. needed to make from sg5 sg4 and it worked. Stupid me. Thx for the help. Marcel +-

Re: [Bacula-users] Bacula setup driving me nuts

2011-08-23 Thread Francisco Javier Funes Nieto
Hi, Only for testing, could you use "/dev/nst0" and "/dev/nst1" in Device section. This use the "non-rewind" device type. Try mount again then. J. 2011/8/23 selanty : > Hi all, > > I have a strange problem when i try to mount a tape. > First what i have i use centos 5.4 with bacula 5.0.3 > Har

Re: [Bacula-users] Bacula setup driving me nuts

2011-08-23 Thread John Drescher
> 3304 Issuing autochanger "load slot 5, drive 0" command. > 3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15: > Termination. >  Results=Program killed by Bacula (timeout) > > have you tried to run /etc/bacula/mtx-changer with load command manually ? > > Yes i did i tried

Re: [Bacula-users] Bacula setup driving me nuts

2011-08-23 Thread Pietro Bertera
Hi, 2011/8/23 selanty : > hi Pietro, > > 3304 Issuing autochanger "load slot 5, drive 0" command. > 3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15: > Termination. >  Results=Program killed by Bacula (timeout) > > have you tried to run /etc/bacula/mtx-changer with load

[Bacula-users] Bacula setup driving me nuts

2011-08-23 Thread selanty
hi Pietro, 3304 Issuing autochanger "load slot 5, drive 0" command. 3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15: Termination. Results=Program killed by Bacula (timeout) have you tried to run /etc/bacula/mtx-changer with load command manually ? Yes i did i trie

Re: [Bacula-users] Bacula setup driving me nuts

2011-08-23 Thread Pietro Bertera
Hi, 2011/8/23 selanty : > 3304 Issuing autochanger "load slot 5, drive 0" command. > 3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15: > Termination. > Results=Program killed by Bacula (timeout) have you tried to run /etc/bacula/mtx-changer with load command manually ?

[Bacula-users] Bacula setup driving me nuts

2011-08-23 Thread selanty
Hi all, I have a strange problem when i try to mount a tape. First what i have i use centos 5.4 with bacula 5.0.3 Hardware is an IBM TS3100 (3573-TL) with 2 LTO5 (ULT3580-HH5) config from bacula-sd.conf Autochanger { Name = Autochanger Device = LTO5_1, LTO5_2 Changer Device = /dev/sg5 Changer Com