Hi,
Only for testing, could you use "/dev/nst0" and "/dev/nst1" in Device
section. This use the "non-rewind" device type. Try mount again then.
J.
2011/8/23 selanty <bacula-fo...@backupcentral.com>:
> Hi all,
>
> I have a strange problem when i try to mount a tape.
> First what i have i use centos 5.4 with bacula 5.0.3
> Hardware is an IBM TS3100 (3573-TL) with 2 LTO5 (ULT3580-HH5)
>
> config from bacula-sd.conf
> Autochanger {
> Name = Autochanger
> Device = LTO5_1, LTO5_2
> Changer Device = /dev/sg5
> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
> }
>
> Device {
> Name = LTO5_1
> Drive Index = 0
> Media Type = LTO5
> Archive Device = /dev/st0
> Autochanger = yes
> Automatic Mount = yes
> Always Open = yes
> Removable Media = yes
> Random Access = no
> Requires Mount = no
> Maximum Job Spool Size = 12G
> Spool directory = "/var/spool"
> Label Type = Bacula
> Check Labels = yes
> Label Media = no
> }
>
> Device {
> Name = LTO5_2
> Drive Index = 1
> Media Type = LTO5
> Archive Device = /dev/st1
> Autochanger = yes
> Automatic Mount = yes
> Always Open = yes
> Removable Media = yes
> Random Access = no
> Requires Mount = no
> Maximum Job Spool Size = 12G
> Spool directory = "/var/spool"
> Label Type = Bacula
> Check Labels = yes
> LabelMedia = no
>
> Config from bacula-dir.conf
> Storage {
> Name = AutoChanger
> Password = host
> Address = snlbck01.steltix.local
> SDPort = 9103
> Device = Autochanger
> Media Type = LTO5
> Autochanger = yes
> Maximum Concurrent Jobs = 20
>
> What happens if i want to mount a tape from console i do the following and
> get the following.
> *mount
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> The defined Storage resources are:
> 1: File
> 2: AutoChanger
> Select Storage resource (1-2): 2
> Connecting to Storage daemon AutoChanger at snlbck01.steltix.local:9103 ...
> Enter autochanger drive[0]: 0
> Enter autochanger slot: 5
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
> 3304 Issuing autochanger "load slot 5, drive 0" command.
> 3992 Bad autochanger "load slot 5, drive 0": ERR=Child died from signal 15:
> Termination.
> Results=Program killed by Bacula (timeout)
>
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0", result is Slot 5.
> 3901 Unable to open device "LTO5_1" (/dev/st0): ERR=dev.c:491 Unable to open
> device "LTO5_1" (/dev/st0): ERR=No medium found
>
> Then i ask the Status and get the following
> *status
> Status available for:
> 1: Director
> 2: Storage
> 3: Client
> 4: All
> Select daemon type for status (1-4): 2
> The defined Storage resources are:
> 1: File
> 2: AutoChanger
> Select Storage resource (1-2): 2
> Connecting to Storage daemon AutoChanger at snlbck01.steltix.local:9103
>
> snlbck01.steltix.local-sd Version: 5.0.3 (04 August 2010) i686-pc-linux-gnu
> redhat
> Daemon started 23-Aug-11 14:20. Jobs: run=0, running=0.
> Heap: heap=135,168 smbytes=24,942 max_bytes=122,999 bufs=100 max_bufs=108
> Sizes: boffset_t=8 size_t=4 int32_t=4 int64_t=8
>
> Device status:
> Autochanger "Autochanger" with devices:
> "LTO5_1" (/dev/st0)
> "LTO5_2" (/dev/st1)
> Device "FileStorage" (/tmp) is not open.
> Device "LTO5_1" (/dev/st0) is not open.
> Slot 5 is loaded in drive 0.
> Device "LTO5_2" (/dev/st1) is not open.
> Drive 1 status unknown.
> ====
>
> Used Volume status:
>
> so the tape is loaded in the correct drive but not mounted. then i try
> another mount
> *mount
> The defined Storage resources are:
> 1: File
> 2: AutoChanger
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 0
> Enter autochanger slot:
> 3901 Unable to open device "LTO5_1" (/dev/st0): ERR=dev.c:491 Unable to open
> device "LTO5_1" (/dev/st0): ERR=No medium found
>
> wont mount and then i do the following mount.
> *mount
> The defined Storage resources are:
> 1: File
> 2: AutoChanger
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 1
> Enter autochanger slot:
> 3301 Issuing autochanger "loaded? drive 1" command.
> 3302 Autochanger "loaded? drive 1", result: nothing loaded.
> 3001 Mounted Volume: SCR02
> 3001 Device "LTO5_2" (/dev/st1) is already mounted with Volume "SCR02"
>
> and the tape is mounted to LTO5_2 while it should LTO5_1
> if ask for status it tells me this
> Device status:
> Autochanger "Autochanger" with devices:
> "LTO5_1" (/dev/st0)
> "LTO5_2" (/dev/st1)
> Device "FileStorage" (/tmp) is not open.
> Device "LTO5_1" (/dev/st0) is not open.
> Slot 5 is loaded in drive 0.
> Device "LTO5_2" (/dev/st1) is mounted with:
> Volume: SCR02
> Pool: *unknown*
> Media type: LTO5
> Drive 1 status unknown.
> Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
> Positioned at File=1 Block=0
> ====
>
> Used Volume status:
> SCR02 on device "LTO5_2" (/dev/st1)
> Reader=0 writers=0 devres=0 volinuse=0
>
> I am totaly lost i asked at first to mount on drive 0 LTO and ending up on
> LTO5_2 it does this with jobs to when i manualy move the tape to drive1 the
> jobs goes further
> What could be wrong i dont know anymore
> btw i am a newby with bacula so dont shoot me for asking stupid things i
> googled and googled but couldnt find anything about it.
>
> Regards Marcel
>
> +----------------------------------------------------------------------
> |This was sent by marcel.van.gereste...@steltix.com via Backup Central.
> |Forward SPAM to ab...@backupcentral.com.
> +----------------------------------------------------------------------
>
>
>
> ------------------------------------------------------------------------------
> Get a FREE DOWNLOAD! and learn more about uberSVN rich system,
> user administration capabilities and model configuration. Take
> the hassle out of deploying and managing Subversion and the
> tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
--
_____________________________________________
Francisco Javier Funes Nieto [esen...@gmail.com]
CANONIGOS
Servicios Informáticos para PYMES.
Cl. Cruz 2, 1º Oficina 7
Tlf: 958.536759 / 661134556
Fax: 958.521354
GRANADA - 18002
------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management
Up to 160% more powerful than alternatives and 25% more efficient.
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
