I ended up working myself into the ground getting the backup system going and
missed part of the day today. Tonight everythign is going to run as is limping
along until I can find the issue.
Morty:
My core switch is HP Procurve 5412 which is managed. The ports are set to auto
and the two nic
I am aware that more nic's do not increase throughput. Basically a backup
server has to be in place tonight and I really don't want to start from scratch
and now reaching for anything that will resolve the issue within the next few
hours.
+--
We are running a Gigabit network. All servers have gigabit connection.
I looked more in detail on the other server identical to ours and the other
difference I found is that TL2000 is connected via scsi instead of SAS.
Right now I pulled the drives and put some spares in to install win2k3 an
What would it take to clear up the network bottleneck. I was looking at
another server that came with our gaming system. Same server (memory, hd, etc)
and tape library, running on win2k3 and netbackup with no issues. The only
difference is, it's running 4 nic's. So it's leaving me a bit baffle
I can run multiple concurrent backups to the 1 drive. I was doing that with our
AIT setup. right now the new server is set to do 3 backups, but I think I could
kick it up to 5. I added a 2nd nic in so I'm now running two 1 gig nics to the
core switch (which is where all the servers that are be
After returning to my office this morning, I had found the server was connected
to a 10/100 switch. I had moved it to the rack and connected it to the switch
10/100/1000 and nic 1 pulls 1000 on ethtools
nic 2 pulls 100 on ethtools.
After futher investigation, it looks like nic 2 is capped at 1
That's what I was figuring.
I'm assuming Gigabit is what is required and was under the assumption that
these nics were gigabit. If someone could confirm 2 gigabit nics will suffice?
If they are I'm betting the server and plugged into our test switch (10/100)
instead of the home where it belon
Janusz
Both nics reported back at 100 Mb/s
I'm beginning to think the network is the bottleneck.
I ran a backup on my server with bacula. backing up the file I have been using.
A 3.4Gb in 2 min and the only reason for it taking so long was because of a
tape change in the library. So locally we
I found another site showing the use of byte size and dd and after playing with
it a bit i can hold 115 MB/s easy and backup my 3.5 GB file like nothing. I'm
looking through Bacula documents, I don't recall if this can be set or not in
the config files.
+---
the backup finished with a speed of 1.3MB/s at little under an hour.
+--
|This was sent by skip...@gmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+-
I was not able to copy/backup files using tar. I may have been doing something
wrong.
I had a job in progress using dd. a 3.3Gb file which i started 40 min ago and
it's still running.
+--
|This was sent by skip...@gmail.com v
I had ran the btape tests on Thursday when everything was setup and pushed 845G
in a little over 2 hours avg speed of 102.7Mb/s
I haven't tried doing the dd or tar test. I never tried that before, so I'm
looking into what needs to be done to complete this task.
The server is a Dell R200, I don
Status update. I just finished the first backup job which was 3.6 Gb. It took
2.5 hours to run. avg speeds finished around 500k/s.
I've gone as far again to reboot the library and the server and still no
changes. I'm not sure what i'm over looking. I have 1T of data to backup on
one of the
Hi all,
Hoping someone could help me out. My department recently purchased a Dell
PowerVault TL2000 autochanger connected via SAS5.
We are upgrading from a spectralogic AIT4 system.
The sad part is the LTO-4 drive is running much slower than the AIT system.
I'm avg around 714k/s. I have bee
Hi Greg,
The plug-in folder was there and i made sure that it was part of the FD on the
windows 2k8 server.
I ended up doing a few tests on a dummy mailbox and everything restored fine.
I'm in the process of fixing a few small issues, but looking to see if anyone
else was able to resolve it
I've been reading throughout the forums and on the internet and have some
issues with the exchange plugin. Perhaps someone could shed some light on the
issue.
Exchange server specs:
Windows Server 2006 x64
Exchange 2007 sp2 x64
I can backup files fine.
when i run the estimate on bcon
16 matches
Mail list logo
