I had ran the btape tests on Thursday when everything was setup and pushed 845G in a little over 2 hours avg speed of 102.7Mb/s
I haven't tried doing the dd or tar test. I never tried that before, so I'm looking into what needs to be done to complete this task. The server is a Dell R200, I don't know all the specs to it off hand. My director installed Fedora and told me to get everything up and running. The SAS-5 card has 2 external ports with no other storage attached to it accept for the PV TL2000. I'm not physically at the server and doing all this from home at the moment, so I can't verify through the cards bios if everything is setup correctly. I am spooling my jobs, set at 200G total and each job is scaled to use 20G and running 3 concurrent jobs at a time. All my jobs are scheduled to keep the drive running constant until they are finished, so no job runs by themselves. I'll push forward with that and report my findings. +---------------------------------------------------------------------- |This was sent by skip...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
