= "Backup_XXX"
> ...
> RunBeforeJob = "/etc/bacula/scripts/backup_database.sh %l" # %l = Job
> Level
> ...
> }
>
> Best Regards
>
> *Wanderlei Hüttel*
> http://www.huttel.com.br
>
> 2017-05-24 5:40 GMT-03:00 Carlo Filippetto :
>
>> Hi al
Hi all,
I have Bacula 7.2.0 installed on Fedora 23.
I need to change the beaviour of a ClientRunBeforeJob based on scheduler,
this to create differential or full dump of a DB.
how I can do this?
I would like to make this feature trought bacula and not with a custom
script.
Thank you
---
Carl
Noone can help me?
Thank you
2016-08-19 16:35 GMT+02:00 Carlo Filippetto :
> Hi,
> on a second site (in segregate vlan) I have ricreated the state of the
> production on 7 August (same volumes, dump of the DB on 7 August) and I'm
> doing the Vfull backups.
> Can I use the
f the jobs is the
same...
Thank you
---
Carlo
2016-08-19 10:37 GMT+02:00 Carlo Filippetto :
> Hi all,
>
> I have a 7.2 version installed.
> I deleted by mistake a Volume with all the Monthly jobs.
>
>
> This is my situation:
>
> 706G 3 July 21:14 P-Virtual-0
Hi all,
I have a 7.2 version installed.
I deleted by mistake a Volume with all the Monthly jobs.
This is my situation:
706G 3 July 21:14 P-Virtual-0005
22G 18 Aug 01:47 V-Daily-0001
21G 19 Aug 03:52 V-Daily-0003
17G 17 Aug 01:27 V-Daily-0005
30G 14 Aug 02:23 V-Weekly-0002
68G 7 Aug 03:52 V-
new installation?
> Because I can have volumes with an long retention and during this time I
> will upgrade bacula.
>
>
> Best Regards
>
> *Wanderlei Hüttel*
> http://www.huttel.com.br
>
> 2016-05-12 9:13 GMT-03:00 Carlo Filippetto :
>
>> Waww...
>> This i
nderlei Hüttel*
> http://www.huttel.com.br
>
> 2016-05-12 12:27 GMT-03:00 Carlo Filippetto :
>
>> May be that the problem is the dimension?
>> I tried with several volumes, from 20 to 80Gb and the import goes well,
>> with the volume with 530Gb fails at the 90%, and wit
May be that the problem is the dimension?
I tried with several volumes, from 20 to 80Gb and the import goes well,
with the volume with 530Gb fails at the 90%, and with the volume with 700Gb
fails after few minutes..
Thank you
2016-05-12 16:55 GMT+02:00 Carlo Filippetto :
> I hav
() at bscan.c:383
#3 main (argc=, argv=) at bscan.c:304
2016-05-12 16:45 GMT+02:00 Carlo Filippetto :
> Dears,
> I tried generating a core-dump when goes in "Segmentation fault"
> this is the gdb
>
>
> Reading symbols from bscan...done.
> [New LWP 2889]
> [T
se I can have volumes with an long retention and during this time I
> will upgrade bacula.
>
>
> Best Regards
>
> *Wanderlei Hüttel*
> http://www.huttel.com.br
>
> 2016-05-12 9:13 GMT-03:00 Carlo Filippetto :
>
>> Waww...
>> This is a fedora 23,
>> an
>
> Best regards,
> Kern
>
>
> On 05/11/2016 02:21 PM, Carlo Filippetto wrote:
>
> Same problem:
> ..
> ..
> ..
> done: 86%
> done: 87%
> 11-mag-2016 13:44:12 bscan: bscan.c:697-0 1,802,240 file records. At
> file:blk=115:2,342,871,863 bytes=495,987,2
for a test
> run?
>
> On Wed, May 11, 2016 at 8:21 AM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Same problem:
>> ..
>> ..
>> ..
>> done: 86%
>> done: 87%
>> 11-mag-2016 13:44:12 bscan: bscan.c:697-0 1,802,240 file recor
51:49 bacula-DR1-gaz kernel: bscan[13873]: segfault at 70 ip
004077b1 sp 7ffd43aa7500 error 4 in bscan[40+51000]
May 11 13:51:50 bacula-DR1-gaz abrt-hook-ccpp: Process 13873 (bscan) of
user 0 killed by SIGSEGV - dumping core
What does it means?
2016-05-11 11:50 GMT+02:00 Carlo Fi
ny/
>>
>>
>> Ou assista minhas videoaulas on-line:
>> <http://www.bacula.com.br/treinamento-bacula-ed>
>> http://www.bacula.com.br/treinamento-bacula-ed/
>>
>> 61 8268-4220
>>
>> Site: <http://%C2%A0www.bacula.com.br>www.bacula.com.br | Fac
;
> Site: <http://%C2%A0www.bacula.com.br>www.bacula.com.br | Facebook:
> heitor.faria
>
>
> ========
>
> Enviado por TypeApp <http://www.typeapp.com/r>
>
> Em 10 de mai de 2016, em 12:38 PM, Carlo Filippetto <
> carlo.filippe...@gmail.com> escreveu:
>>
&
gt; Bacula? What is the exact bscan command are you using to fetch the error?
> Can you post the error output?
> Btw: Ana is right. Both MySQL and Postgresql have also replication
> features that might perform what you want with lesser computational effort
> and storage stress.
>
from your media volumes.
>
> Unless you are in this situation, I would recommend you to use a catalog
> dump for that. Is this possible?
>
> Best regards,
> Ana
>
> On Mon, May 9, 2016 at 12:58 PM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
&g
Dears,
this is the last log:
bscan[28589]: segfault at 70 ip 004077c1 sp 7ffd1bb75760 error
4 in bscan[40+51000]
What does it means?
Thanks
2016-05-09 12:58 GMT+02:00 Carlo Filippetto :
> Hi all,
> I'm trying to create a secondary site using the bscan feature
Hi all,
I'm trying to create a secondary site using the bscan feature to recreate
the Catalog.
I use this command:
bscan -V V-Daily-0005 -d1 -dt -m -v -s -S -c /etc/bacula/bacula-sd.conf
/data/bacula/data/ >> /var/log/bacula_import 2>&1
When I user little volumes I don't have any problem running
Bacula can use VSS.
2015-11-06 11:46 GMT+01:00 sachrodr :
> Hi Team,
>
> How to backup windows 2008/2012 servers system-state using bacula ? i need
> to know this before i go for windows disaster recovery,
>
> +--
> |This was sen
ng? Could you post your
> configurations for using VirtualFull backups? Is there a log for the
> virtual full job?
>
> Best regards,
> Ana
>
> On Tue, Nov 3, 2015 at 10:59 AM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Hi all,
>> I want
I think you have to use one set of pool for every storage.
I think that you can write volumes of the same pool into different storage,
the problem may arrive when you have to restore...
Try to a restore job...
This is my Schedule:
Schedule {
Name = "Custom"
Run = Level=Full Storage
I don't like to use "label-format" I prefer to set the label by myself.
In my installation all the jobs that runs during the same night gone to the
same volumes.
bye
2015-11-03 17:14 GMT+01:00 Wesley Render :
>
> Thanks Carlo. This is very helpful. I also found this here which I missed
> before:
Hi,
for question #2:
Yes you have to create different pool, the firts reason is that usually
incremental bck lives less than a Full backup, the duration is into the
Pool information
So in my case I have
- p-daily INCREMENTAL with 6 volumes (duration 7 days)
- p-weekly DIFFERENTIAL with 4 volumes
Hi all,
I want to use VirtualFull as default policy for my backup, but I have some
problem that I'm not able to solve:
- I create a specific pool on a new device (disk), and run the Vfull
the backup goes well, I can find the new volume into his specific
device, but I can't see the Job into
>
> The status client bconsole command shows the client version at the
> begining of its output.
>
> Best regards,
> Ana
>
> On Fri, Oct 30, 2015 at 11:43 AM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Dears,
>> it is possibile th
Dears,
it is possibile that the last version for windows is the 5.2.10?
I upgrade all (Linux client and servers), and I can't find any new *.exe
version for Windows
Do you know any command to show the version of every client from bconsole?
Thank you
-
r fortunately I
> found no problem with the source files in sourceforge. I´ve just downloaded
> the tar.gz, build it and found no problem in the script
> (update_mysql_tables).
>
> Best regards,
>
> Ana
>
> On Wed, Oct 28, 2015 at 12:19 PM, Carlo Filippetto <
> carlo.f
e? I have
> the one downloaded from blog.bacula.org and there is no problem with the
> update_mysql_tables script.
>
> Best regards,
> Ana
>
> On Wed, Oct 28, 2015 at 11:24 AM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Thank you,
>> t
Thank you,
ther's another problem, the script don't create a table because ther's a
";" instead of ","...
CREATE TABLE Snapshot (
SnapshotId INTEGER UNSIGNED AUTO_INCREMENT,
NameTINYBLOB NOT NULL,
JobId INTEGER UNSIGNED DEFAULT 0,
* FileSetId INTEGER UNSIGNED DEFAUL
Sorry!!
The script is "update_mysql_tables"
I search new "update_mysql_tables_14_to_15"
Thank you
2015-10-28 15:07 GMT+01:00 Carlo Filippetto :
> Hi all,
> I upgrade my Bacula versione from 5.2.3 to 7.2.0
>
>
> The DB versione of the 5.2.3 is the 14th, n
Hi all,
I upgrade my Bacula versione from 5.2.3 to 7.2.0
The DB versione of the 5.2.3 is the 14th, now in the directory "updatedb"
of the new installation ther's no new update, but when I run bacula if
stops with:
28-ott 14:50 bacula-dir JobId 0: Fatal error: Version error for database
"bacula".
I made double check and you are right!!
^_^
Thank you
2015-09-24 18:10 GMT+02:00 Markus Falb :
> On 24.9.2015 15:30, Carlo Filippetto wrote:
> > Hi all,
> >
> > I read for the 4° times the documentation:
> >
> > /VIRTAUL FULL -> "It permits yo
Hi all,
I read for the 4° times the documentation:
*VIRTAUL FULL -> "It permits you to consolidate the previous Full backup
plus the most recent Differential backup and any subsequent Incremental
backups into a new Full backup."*
This means that the new VF (VirtualFull) is not like a real Full.
the month I'll go on with Incremental &
Differential.
I'm able to produce a VFull once a month or I risk to not having all the
data to reconstruct it?
Thank you
2015-09-24 9:42 GMT+02:00 Carlo Filippetto :
> You are right
> I can't do nothing with the Oldest In
ore, you need the last full and all subsequent incrementals. Maybe you
> need to use differential backups, where you just need the last full + last
> differential volumes ok?
>
>
> On Wed, Sep 23, 2015 at 11:14 AM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
&
to create nothing and it
is only a configuration like "type = VBackup" and "NextPoll=Monthly" in the
Scheduler?
It's correct?
Thank you
2015-09-23 15:38 GMT+02:00 Carlo Filippetto :
> Great!
>
> You solve me a lot of questions
>
> ^_^
>
>
>
&
If you specify it in the Job resource, it will
> override the one specified in the Pool resource. If you specify it in the
> Schedule resource, it will override the ones in the Job and Pool resources.
>
> Best regards,
> Ana
>
> On Wed, Sep 23, 2015 at 9:56 AM, Carlo Filippetto
up
> Volume Retention = 30 days
> }
>
> Best regards,
> Ana
>
> On Tue, Sep 22, 2015 at 6:38 PM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Thank you very mutch
>>
>> ^_^
>> Il 22/set/2015 18:50, "Ana Emília M.
onPool
>Pool Type = Backup
>Retention Period = 30 days
> }
>
> Job {
>Name = CopyJob
>Type = Copy
>Pool = OriginalPool
>...
> }
>
> Best regards,
> Ana
>
> On Tue, Sep 22, 2015 at 8:00 AM, Carlo Filippetto <
> carlo.filipp
Hi,
Noone have idea if the copy job can have a retention bigger that the
original volumes?
I have to modify it from "Update" command in bconsole?
Thank you
2015-09-21 16:33 GMT+02:00 Carlo Filippetto :
> Hi all
>
> I would like to modify my backup strategy: it is possible t
nd the job logs?
>
> Best regards,
> Ana
>
> On Mon, Sep 21, 2015 at 10:26 AM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Hi all
>> my strategy is divided as usually into 3 steps:
>> - 6 daily
>> - 4 weekly
>> - 3 monthly
>>
Hi all
I would like to modify my backup strategy: it is possible to use Copy Job
as Weekly Job?
I'll explain:
I need to make every day incremental, to move this volumes outside for
restore in second site, but I can't use 30 Volumes, to cover all the month.
Can I use 7 daily volumes and every Sund
Hi all
my strategy is divided as usually into 3 steps:
- 6 daily
- 4 weekly
- 3 monthly
The retention of the monthly is 80days, but in the last month the Jobs
recicled 2 volumes!
Pool: P-Monthly
+-++---+-+-+--+--+---
Dears,
I set my job with "Accurate = yes", and it works well.
The only question is ... is there a way to remove files deleted from
production when I perform the restore in DR site?
Thank you
2015-08-20 18:02 GMT+02:00 Carlo Filippetto :
> Hi all,
> I would like to have
Hi all,
I would like to have a DR site always aligned with the production, I made
this:
2 different Bacula server, when the production finish the bck (every day
incremental or differential and 1 monthly Virtual Full) sent the dump and
the volumes onto the second site and start the restore forcing t
Hi all,
I would like to have a DR site where the machines are clones of the
production ones.
May I use only the incremental volumes to daily restore them (something
like sync this machine with the original ones)?
Thank you
--
Hi Ana,
2015-05-19 6:58 GMT+02:00 Ana Emília M. Arruda :
> (i'm supposing you will have on site2 just the volumes of resulting copy
> jobs), it could be interesting to not replicate the original backup jobs
> into your catalog on site2. This way bacula will promote the copy jobs to
> "normal" bac
Hi all,
I want to use copy job to copy volumes to a secondary site used as disaster
recovery.
Can I use this copy job to restore a server in the second site?
Can I use Copy Job create Virtual Full Backup?
Thank you
--
One
2015-05-18 19:55 GMT+02:00 Ana Emília M. Arruda :
> "The new copies can not be used for restoration unless you specifically
> choose them by JobId."
I read it, but propably I don't undertand it in the correct way... (I'm
Italian)
I read that I can do a "restore copy" job that restore the origi
r copy Jobs.
>
> So, sure you can copy "a volume" (all the jobs that were copied in an
> original volume) using copy jobs.
>
> You´re welcome!
>
> Best regards,
> Ana
>
>
> On Mon, May 18, 2015 at 2:07 PM, Carlo Filippetto <
> carlo.filippe...@gmail.com&g
and the db you can't do backup from site2,
> because the machine check the IP address, with cluster I want to sckip this
> problem.
>
>
> On Mon, May 18, 2015 at 12:13 PM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Sorry for the delay!
>>
Sorry for the delay!
>
>
> On Fri, May 15, 2015 at 11:23 AM, Carlo Filippetto <
> carlo.filippe...@gmail.com> wrote:
>
>> Thank you.
>> I will use the sd2sd solution.
>>
>>
>> 2015-05-15 15:54 GMT+02:00 Davide Giunchi :
>>
>>>
Thank you.
I will use the sd2sd solution.
2015-05-15 15:54 GMT+02:00 Davide Giunchi :
> problem: you need a lot of bandiwidth ( = € )! then you must keep always
> sync the servers, periodically check that everithing is working good, and
> then periodically to dr tests.
> benefit: fast dr
>
I r
Hi all,
I would like to have a redundant solution.
I have 2 sites, with a storage (and SD) on both side.
I would like to copy all the backup volumes from the first site to the
second one, and this shouldn't be a problem.
I would like to have a bacula up and running, and updated on the second
site
Hi to all,
I have several volumes made to save logs. I burn then on a BluRay to
archive it for more time than retention period.
Now I have to open one of this volumes only to list the files inside
and see the data of a specific file, to do it I have to recretare the
volume in the DB or I can scan
Hi all,
there's noone that have used bacula with exchange 2013?
I would like to know if I can use bacula plugins or I have to use script to
backup it.
Thank you
--
Try New Relic Now & We'll Send You this Cool Shirt
New Rel
Hi all,
as I write in the subject I need to backup Sql Server 2012, you have
any idea on how to optimize the process and have a consistend DB
I thought to make a dump script and backup it, but how?
Any other ideas?
Thank you.
---
Carlo
---
Hi all,
I trying to install bacula 5.2.10 on Windows 2012 server machine.
The installation have always several problem on start-up the daemon, but
when all is solved it seems to work.
I use "estimate" and it works fine, but when I tried to make the first
test-job:
04-Mar 16:00 sharepoint-db-fd Job
Are you talking about the error message that says the number of volume
> files differs from the catalog?
>
>
> I am trying to figure out what you mean by "volume dimension" as that
> is not what I would call it in english.
>
> John
>
Sorry Volumes SIZE!!
May be that the error is " volume files d
Hi,
I migrate bacula to new infrastracture. In several other time when the jobs
run I had an orror about the difference of volume's dimension.
Ther's a way to check it before?
Thank's
---
Carlo
--
Everyone hates slow webs
I found some information that speaking about read bacula's standard input
(stdin) ..
very interesting, but... how can I do??
thank you
2012/11/8 Carlo Filippetto
> In practice,
> I would be able to manage the information that is sent as body in the
> message with bsmtp, inc
In practice,
I would be able to manage the information that is sent as body in the
message with bsmtp, including when it sends e-mails to the operator (mount
/ warning)
Thank you
2012/11/8 Carlo Filippetto
> Hi all,
> I have a custom script that runs instead of bsmtp
>
> I w
I don't want to use any mail server.
I want to use a php script that create a ticket or allarm on my monitor system
I soved it, I need to call /bin/bash with "-c" to start every kind of
script, otherwise I have an error.
Thank you
---
Carlo
2012/10/30 John Doe :
> From
Hi all,
I need to modify the mailcommand with a script
How can I do it?
Thank's
---
Carlo
--
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
2 07:05:59
Files Expected: 203,262
Files Restored: 2,746
Bytes Restored: 154,595,398
Rate: 669.2 KB/s
FD Errors: 0
FD termination status: OK
SD termination status: Error
Termination: *** Restore Error ***
-
What does it means?
I use CentOS 5.4 + Bacula
only config requirement is to leave the client daemons listen on
> all ip addresses, have the same password and make sure the filesets
> are different.
>
> Regards,
> --Simone
>
>
>
> On 30 July 2012 10:35, Carlo Filippetto wrote:
>> Hi all,
>>
>> I hav
ances?
I need to clusterize the 2 istance connected with the services?
Thank you.
---
Carlo Filippetto
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat lan
0
Rate: 0.0 KB/s
FD Errors: 0
FD termination status: OK
SD termination status: OK
Termination:Restore OK
VERSION: 5.0.2 on CentOS release 5.4 (Final)
What does
restore job directly. All restore jobs must
be run using the restore command.
*
I tried to read some documentation but I don't understand what I have to do
for this problem.
Thank's
---
Carlo Filippetto
--
For
he passwd match.
And the conf file don't have any localhost IP
There's any problem with client 64 bit and server 32 bit?
This is the firts client I install with yum, usually I compile it with
--enable-client-on
2012/4/12 John Drescher
> 2012/4/12 Carlo Filippetto :
> > Hi,
> > I have bacula-server installed on a CentOS 5.2, version 5.2.3, kernel
> i686
> >
> > Today I installed fot the first time a client with CentOS 6.2 x86_64
> > (installation made with yum
ked_Questi.html#SECTION00376for
help.
There's some problem connecting to 64bit under linux (with windows I don't
have got problems)
Thank's
---
Carlo Filippetto
--
For Developers, A Lot Can Happen In A Se
Hi all,
I have a production server and his clone as disaster recovery, I would like
to use bacula to maintain the clone aligned to the production one.
I have to use the restore job, the question is: the restore process
overwrite all or only the file changed? there's a particolar tag that I
have to
Hi all,
I have 5 bacula installation, but only in 1 I have this problem..
25-Jan 14:39 netbackup-dir JobId 2044: Volume used once. Marking
Volume "catalog-2011.4.27-7.0" as Used.
25-Jan 14:39 relay-fd JobId 2044: Could not stat
"/var/bacula/working/bacula.sql": ERR=No such file or directory
2
Hi all,
I have a filesystem with
/
/boot
the FileSet is created as
FileSet {
Name = FS-root-boot
Ignore FileSet Changes = yes
Include {
File = /
File = /boot
Options {
compression = GZIP9
signature = MD5
}
}
Exclude {
File = /var/lib/mysql
}
}
Thank's to all,
I used the ClientrunPreScript to make the Excahge backup throught "wbadmin"
as Jilian suggest, but the dimension increase of 20/30%.. my db is 105Gb and
after the wbadmin the backup is 135Gb
I don't have all this space..
There's a way to compress it during the backup? on thecknet
Hi all,
I have a client that upgrade his infrastructure with Exchange 2010.
If I enable the exchange Plugins the backup fails
Client is Windows 2008 R2 (64bit)
Server -> centos + 5.0.1 (24 February 2010) i686-pc-linux-gnu redhat
What I have to do make it work?
Thank's
---
Carlo Fi
Hi,
there's a way to make server side compression instead of client side?
Thank's
---
Carlo Filippetto
--
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive
Hi,
you are right, but as you may now, not all the people are system
administrator, so I need to let an easy interface for the dummies admins
Any other suggestions?
Thanks
---
Carlo
2011/7/5 Rory Campbell-Lange
> The best interface in my view is psql and bconsole.
>
> These are 'web' ac
Yes sorry!!
I would like to say exactly "webmin bacula module"
Thank's
2011/7/5 Mauro Colorio
> > I tried phpmyadmin, and webacula but I need something more powerfull...
>
> phpmyadmin isn't a bacula web interface..
> webacula works great but fails on restore,
> I suggest to use webmin bacula
Hi,
what is the best interface for bacula?
I tried phpmyadmin, and webacula but I need something more powerfull...
Can you help me?
---
Carlo Filippetto
--
All of the data generated in your IT infrastructure is seriously
John Drescher
> 2011/4/19 Carlo Filippetto :
> > Hi,
> > I have a problema with catalog backup
> > Everywhere I put the DB dump bacula don't work and I had the message as
> in
> > the title.
> >
> > I tried modifing the /etc/bacula/make_catalog_backup,
thing
Any ideas?
---
Carlo Filippetto
--
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, sim
I all,
I'm a Linux administrator, but I need to install bacula server on Windows...
I can't install with the classic "NEXT" "NEXT" "NEXT" "FINISH"
:)
How I have to do?
--
Carlo
--
Sell apps to millions through the Intel
Bacula need to use IP and Name to autenticate the server..
The command 'estimate' work well?
Can you modify that cron script to add the new address?
---
Carlo
2010/8/20 Smaïne KAHLOUCH
> Hi everyone,
>
> I'm trying to configure a client in a remote network.
> In order to work, i had to config
I all,
I work with bacula since more than 1 year.. but I start have some doubt
I upgrade my backup software only to have the ability to truncate the
volumes automatically, now I'm running 5.0.2
-
I have this Pool:
Pool {
Name = P-daily
Maximum Volume Bytes
I think I have understood wrong when I translate from english to Italian
File and job retention are use to destroy the data, but if Volume have
retention period less than them purge the catalog too!!
Now I had used a dump to restore the DB and bscan to add the new volumes
2010/8/10 Carlo
Ther's something wrong!
I have changed the retention on Client:
*Client {
Name = db-fd
Password = Passxxx
Address = db
FDPort = 9102
Catalog = MyCatalog
File Retention = 6 days
Job Retention = 6 days
}
*
I have this log today:
*09-Aug 20:00 storage-dir JobId 9020: Begin pruning Job
Thak's
so I can put it on '6 days'??
But as I ask befere.. that value are optional?
---
carlo
2010/8/9 John Drescher
> 2010/8/9 Carlo Filippetto :
> > Hi all,
> > I have a question..
> >
> > I have 3 different Pools,
> > - daily
> > -
.org/5.1.x-manuals/en/main/main/New_Features_in_5_0_1.html#SECTION0041)?
Thak's
CIAO
---
Carlo Filippetto
--
This SF.net email is sponsored by
Make an app they can't live without
Enter the
How many time you have to store that DVD?
Set a correct retention period for the volumes, ad use volumes with the
DVD's size..
Whan the jobs 'close' the volumes you can burn it on DVD and remove them
from the HD.
When you need to restore the data you need only to copy from the DVD to disk
the corr
Mount a LUN on the Server that you want to use as Storage Daemon and than
use that mount point for your backup
CIAO
---
Carlo Filippetto
2010/8/4 Heitor Medrado de Faria
> Guys,
>
> Does anyone knows, briefly, how to backup data on the EMC Clariion cx4
> storage, using Bacula?
Perfect!
Thank you
Ciao
---
Carlo Filippetto
2010/8/4 John Drescher
> -- Forwarded message --
> From: John Drescher
> Date: Wed, Aug 4, 2010 at 8:50 AM
> Subject: Re: [Bacula-users] Problem with Volumes
> To: Carlo Filippetto
>
>
> On Wed, Aug 4
ach Volume it writes can only be used for
23 hours after the first write
-
Wh it don't work for me?
Thak's
---
Carlo Filippetto
2010/8/3 John Drescher
> On Tue, Aug 3, 2010 at 9:55 AM, Carlo Filippetto
> wrote:
> > Here it is
> >
> > *list med
volume new is in use from 7 days!!
What is wrong?
*** Bacula 5.0.2 ***
Thank's
CIAO
---
Carlo Filippetto
--
The Palm PDK Hot Apps Program offers developers who use the
Plug-In Development Kit to bring their C/C++
esde el servicio BlackBerry de Movistar
>
> -Original Message-
> From: Carlo Filippetto
> Date: Fri, 30 Jul 2010 13:42:26
> To: jerry lowry
> Cc:
> Subject: Re: [Bacula-users] Problem with backup
>
>
> ---
I will tried this way!
2010/7/29 jerry lowry
>
> On 7/29/2010 1:46 PM, Dan Langille wrote:
> > On 7/29/2010 11:21 AM, Carlo Filippetto wrote:
> >
> >> Hi all,
> >> I have a problem when I do FULL backup on all the server in DMZ. this
> >> job
I have just tried this way, but don't work
2010/7/29 Dan Langille
> On 7/29/2010 11:21 AM, Carlo Filippetto wrote:
>
>> Hi all,
>> I have a problem when I do FULL backup on all the server in DMZ. this
>> jobs stops with the error "Network error with FD during
Hi all,
I have a problem when I do FULL backup on all the server in DMZ. this
jobs stops with the error "Network error with FD during Backup:
ERR=Connection reset by peer "
I have configured the firewall, DMZ - LAN on CISCO ASA, so that
bacula ports (9101/2/3) are opened between the server and the
1 - 100 of 183 matches
Mail list logo
