Hello everybody. I am new to Bacula and have managed to install/use/test it for
some time now and decided to implement some web GUI stuff.
I successfully installed and configured Bweb and Bacula-Web (from the
bacula-gui-2.4.3.tar.gz package).
Could not do the same for the Brestore part though. I
On both Suse 9 and CentOS 4.6, I ran into a problem building client-only
rpms with these command lines:
sudo rpmbuild --ba --define "build_client_only 1" --define "build_su9 1"
bacula.spec
sudo rpmbuild --ba --define "build_client_only 1" --define "build_centos4 1"
bacula.spec
The error is a mis
John Drescher escribió:
>>> Is there any firewall / network reason why the port on the client
>>> could be dropped after some period of inactivity?
>>>
>>>
>> No... the backup finish 99.9 %. It copies all data from the client, but
>> it fails in the last moment...
>>
>>
> I saw that
>> Is there any firewall / network reason why the port on the client
>> could be dropped after some period of inactivity?
>>
> No... the backup finish 99.9 %. It copies all data from the client, but
> it fails in the last moment...
>
I saw that. The reason why I asked this is that while sending
> Is there any firewall / network reason why the port on the client
> could be dropped after some period of inactivity?
>
> John
>
No... the backup finish 99.9 %. It copies all data from the client,
but it fails in the last moment...
--
I went to the section on auto labeling. I am a bit confused when I get to this
sentence " Automatic Volume labeling is enabled by making a change to both the
Pool resource (Director) and to the Device resource (Storage daemon) shown
above." Which two files are they? I changed /bacula/bin/bacula-
On Fri, Oct 17, 2008 at 3:13 PM, John Drescher <[EMAIL PROTECTED]> wrote:
> On Fri, Oct 17, 2008 at 3:07 PM, Arch Willingham <[EMAIL PROTECTED]> wrote:
>> #list media pool
>> Defined Pools:
>> 1: Default
>> 2: Scratch
>> 3: SATA250POOL
>> 4: SATA15TBPOOL
>> 5: Daily File backup
On Fri, Oct 17, 2008 at 3:07 PM, Arch Willingham <[EMAIL PROTECTED]> wrote:
> #list media pool
> Defined Pools:
> 1: Default
> 2: Scratch
> 3: SATA250POOL
> 4: SATA15TBPOOL
> 5: Daily File backup pools
> 6: Weekly File backup pools
> 7: Tape Backups Pool
> 8: Tape Ba
#list media pool
Defined Pools:
1: Default
2: Scratch
3: SATA250POOL
4: SATA15TBPOOL
5: Daily File backup pools
6: Weekly File backup pools
7: Tape Backups Pool
8: Tape Backups Pool - weekly
Select the Pool (1-8): Unexpected question has been received.
8
No r
On Oct 17, 2008, at 12:33 PM, Erik P. Olsen wrote:
> On 17/10/08 12:33, Martijn de Munnik wrote:
>> I really don't know how to solve this problem? Why is bacula unable
>> to
>> move to the end of data?
>
> It has sometimes happened to me also. Maybe it's because the tape is
> positioned
> dif
On Fri, Oct 17, 2008 at 12:00 PM, Mikel Jimenez <[EMAIL PROTECTED]> wrote:
> Mikel Jimenez escribió:
>> Hello
>> For about 4 days, I receive this message os a client backup:
>>
>> "Fatal error: No Job status returned"
>>
>> The backup completes but when it is going to insert atributes in DB, it
>>
On 17/10/08 12:33, Martijn de Munnik wrote:
> I really don't know how to solve this problem? Why is bacula unable to
> move to the end of data?
It has sometimes happened to me also. Maybe it's because the tape is positioned
different from where Bacula believes it is. Try to change the error flag
I dont know if an official feature request is needed for this "small
stuff".
Item n: List inChanger flag when doing restore.
Origin: Jesper Krogh<[EMAIL PROTECTED]>
Date: 17 oct. 2008
Status:
What:
When doing a restore the restore selection dialog ends by telling stuff
lik
Mikel Jimenez escribió:
> Hello
> For about 4 days, I receive this message os a client backup:
>
> "Fatal error: No Job status returned"
>
> The backup completes but when it is going to insert atributes in DB, it
> doesn do.
> Here is the email of baculal of soto.irontec.com client.
>
> Please hel
-- Forwarded message --
From: John Drescher <[EMAIL PROTECTED]>
Date: Fri, Oct 17, 2008 at 11:49 AM
Subject: Re: [Bacula-users] Can't do tape backups - "Cannot find any
appendable volumes"
To: Arch Willingham <[EMAIL PROTECTED]>
On Fri, Oct 17, 2008 at 11:24 AM, Arch Willingham <[
Y'all will laugh but I have tried and tried but I am lost on how to backup to
tape. When I run "/root/bacula/bin/btape -c bacula-sd.conf /dev/nst0", the test
runs correctly. I have tried to set up a tape job but it stops with this
message:
16-Oct 06:05 localhost-sd JobId 227: Job
GROUP_Tape_on
On Oct 17, 2008, at 3:55 AM, Marco Lertora wrote:
> Dan Langille ha scritto:
>> On Oct 16, 2008, at 6:46 PM, [EMAIL PROTECTED] wrote:
>>
>>> Hi all,
>>>
>>>I need to recover some files from a tape but, after loading,
>>> bacula
>>> cannot mount it.
What is the error you see when trying to
On Fri, Oct 17, 2008 at 5:54 AM, Piotr Gbyliczek <[EMAIL PROTECTED]> wrote:
> On Thursday 16 October 2008 17:40:16 T. Horsnell wrote:
>
>> I had this problem from the start. I ended up with a line in my
>> RunBefore script which disabled the backup job:
>>
>>echo "disable job=Job1" | /usr/local
Or to be more specific, what do I need to change in my sqlite scrips to
make them work again?
I've searched, but haven't been able to find any doco on what I need to do.
I have just run a Debian distribution upgrade from sarge to etch and
bacula started giving error like below
17-Oct 12:40 blu
Henry Jensen <[EMAIL PROTECTED]> writes:
> because of bug http://bugs.bacula.org/view.php?id=1147 I built the
> fd from latest svn without replacing the director (version 2.2.5) on
> my backup server.
>
> Then I got the following error:
>
> bserver-dir JobId 6856: Fatal error: File daemon at "somec
Hello List,
does someone know esactly the criteria of the 10 past jobs printed after
the command "status client=CLIENT"?
I thought they were the last ten, b fut this is not the case. I have seen
they are kept on the client in the fd working dir, file
bacula-fd.9102.state, but I do not know which
I really don't know how to solve this problem? Why is bacula unable to
move to the end of data?
On Oct 15, 2008, at 12:22 AM, Bacula wrote:
> 15-Oct 00:05 chet-dir JobId 754: Start Backup JobId 754,
> Job=Home_Directories_Job_Chet.2008-10-15_00.05.06
> 15-Oct 00:05 chet-sd JobId 754: 3307 Is
On Thursday 16 October 2008 17:40:16 T. Horsnell wrote:
> I had this problem from the start. I ended up with a line in my
> RunBefore script which disabled the backup job:
>
>echo "disable job=Job1" | /usr/local/bacula/bin/bconsole
>
> This disables any further scheduling of Job1 but leaves th
Hello
For about 4 days, I receive this message os a client backup:
"Fatal error: No Job status returned"
The backup completes but when it is going to insert atributes in DB, it
doesn do.
Here is the email of baculal of soto.irontec.com client.
Please help
Thanks
Mensaje original -
Dan Langille ha scritto:
> On Oct 16, 2008, at 6:46 PM, [EMAIL PROTECTED] wrote:
>
>> Hi all,
>>
>> I need to recover some files from a tape but, after loading, bacula
>> cannot mount it.
>>
>> Opening the device with hexer I find the tape starting with a
>> session/job header instead a volume
17.10.2008 09:34, Tilman Schmidt wrote:
> Am 16.10.2008 22:40 schrieb John Drescher:
>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>
> What's the purpose of that final "|cat"?
Ensure a retuen code of 0, meaning "Ok". Grep might not find the
search string, which would indica
Am 16.10.2008 22:40 schrieb John Drescher:
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
What's the purpose of that final "|cat"?
Just curious
T.
--
Tilman Schmidt
Phoenix Software GmbH
Bonn, Germany
signature.asc
Description: OpenPGP digital signature
27 matches
Mail list logo
