Hi Pedro,
thanks for your reply. You are right in your suggestion that one
StorageDaemon runs on a USB rack. But this one only does an additional
weekly backup. The daily backups are written on an SCSII harddrive that is
mounted in the same server as the director.
I think that I found the problem
According to the Hardware browser the PV-124T is located on /dev/sg3 but there
is no sg3 under /dev..well there is no sg and when I try to access
/dev/sg3 it just says no such device any ideas?
When I ls /proc/scsi I get the following:
aic79xx/ device_info scsi
Janco v.d Merwe
Net
Title: RE: [Bacula-users] Rescue cd create/make problem
Hi to all!
I took the advice about loading a minimal OS config and then restoring from backup. I have another issue that may or may not be related to the restore...
I used "restore all" from the console, with files being replaced alwa
Forgive my stupidity. It turns out that after sudo'ing that it creates some
environment variables that are passed to subprocesses. I removed these SUDO
environment variables and things worked fine. Sorry.
-
Using Tomcat but
On Sep 12, 2006, at 11:16 AM, Ryan Novosielski wrote:
> My opinion is that the update is a coincidence. I have had this happen
> from time to time and ordinarily it was a tape failure (either on this
It's a disk system, no tape involved. But thanks for the note.
We'll see what happens tomorro
> On Monday 11 September 2006 20:21, Jo Rhett wrote:
>> ANALYSIS: So.. the volume's usage period is being determined not by
>> when it was first written to, but instead by the start time of the
>> first job that wrote to it.
>>
>> Is this behavior known? Is it fixed in current? Obviously it's no
On 9/9/06, Alexander Nolte <[EMAIL PROTECTED]> wrote:
Hello everybody!I just set up a Bacula System that will backup our 4 servers + some clients
but everytime I try to restore some files it just says:09-Sep 15:35 server-dir: Start Restore Jobrestore-server2-usb.2006-09-09_15.35.1309-Sep 15:35 Stor
On Thursday 31 August 2006 23:21, Santiago Alberch wrote:
> I´m editing DirStartUp.py.
> I want to write a script that can check if the
> termination job was:
>
> Termination: Backup OK -- with warnings
This occurs when the JobStatus == "T" and
(JobErrors or SDJobErrors are non-zero).
>
> I ca
My opinion is that the update is a coincidence. I have had this happen
from time to time and ordinarily it was a tape failure (either on this
or the last job -- the initial read/set of the number of volume files is
getting messed up), or a bad exit from the previous job.
That said, I hear Purge Ol
Last night I updated a Pool definition to enable "Purge Oldest
Volume". This is the only change made to the server in a week or
maybe two.
This morning the first backup (which should have purged a volume)
failed, with
12-Sep 11:05 backup0-dir: Start Backup JobId 268,
Job=client.domain.co
On Tuesday 12 September 2006 18:36, Michael Brennen wrote:
> [EMAIL PROTECTED] wrote:
> > I'm running into a frequent situation where Bacula wants a given volume to
be
> > in one drive of our autochanger, and it doesn't seem to find the volume
when
> > it's already in the other drive.
> >
> > T
Thank you Kern, Arno, and Erich for your responses.
Please forgive my impatience. I need to be mindful that not everyone in
the world lives between the Eastern and Pacific (US) timezones. I
thought it was an unusual question that not many had experienced, and
certainly not on the short list of t
On Tuesday 12 September 2006 18:21, [EMAIL PROTECTED] wrote:
> I'm running into a frequent situation where Bacula wants a given volume to
be
> in one drive of our autochanger, and it doesn't seem to find the volume when
> it's already in the other drive.
>
> This is with Bacula 1.38.9, under Li
[EMAIL PROTECTED] wrote:
> I'm running into a frequent situation where Bacula wants a given volume to be
> in one drive of our autochanger, and it doesn't seem to find the volume when
> it's already in the other drive.
>
> This is with Bacula 1.38.9, under Linux (FC1), with a 23-slot, 2 drive
>
I'm running into a frequent situation where Bacula wants a given volume to be
in one drive of our autochanger, and it doesn't seem to find the volume when
it's already in the other drive.
This is with Bacula 1.38.9, under Linux (FC1), with a 23-slot, 2 drive
autochanger and mysql5.
Most backup
Sorry, I'm wrong I have set in my fileset resource onefs=NO, but this
not work to me.
Really sorry, I need spleep.
Thanks anyway
2006/9/12, Lautaro Di Martino <[EMAIL PROTECTED]>:
> but this is not a solution for my problem. I have set onefs=yes in my
> FileSet resource, anyway bacula can't read
In response to "Lautaro Di Martino" <[EMAIL PROTECTED]>:
> but this is not a solution for my problem. I have set onefs=yes in my
> FileSet resource, anyway bacula can't read /backup/nn2 and tell me
> will not descend into /backup/nn2 for backup it.
I suspect there is a language barrier.
onefs =
but this is not a solution for my problem. I have set onefs=yes in my
FileSet resource, anyway bacula can't read /backup/nn2 and tell me
will not descend into /backup/nn2 for backup it.
2006/9/11, Bill Moran <[EMAIL PROTECTED]>:
> In response to "Lautaro Di Martino" <[EMAIL PROTECTED]>:
>
> > hi
My Powervault works with these settings :
#
# An autochanger device with two drives
#
Autochanger {
Name = Autochanger
Device = Drive-0
# Device = Drive-2
Changer Command = "/root/bacula/bin/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg2
}
Device {
Name = Drive-0
Good Day, I'm taking over as one of our sysadmins at work and have found that we're using Bacula to implement our datacenter backups. It seems to have been installed and at one time worked, but our last admin decided documentation was a form of unholy evil and stayed fully away from it. So I'm
Logs usually runs under something like {bacula-home}/var/bacula/workingYou will find a log file there with all the messages.If you want a better help, take the three conf files of the server (bacula-dir.conf, bacula-sd.conf and bacula-fd.conf), make a copy, disguise any personal information (pass
In response to "Keith Phipps" <[EMAIL PROTECTED]>:
>
> When I first logged in I had some messages, I typed 'messages' and got
> them - sort of skimmed through to see what kinds of messages bacula gives. I
> made the poor assumption that they'd still be there when I went back - I was
> incorrec
> Also, if it's stating:
>
> Archive "DATACENTER-TAPE1" is not open or does not exist.
>
Hi Keith,
If you do a 'list volumes' and then look for that tape it should find
it. Hopefully if it's not in the drive he has actually labelled them.
Alternatively put a fresh tape in the sys
First you need to be sure that you have the PV-124T correctly connected.
I bought my PV-124T with a adaptec board scsi with it.
First be sure that the board is recognized by linux.
I didn't understand you message quite well. Does your cat
/proc/scsi/scsi is something like this?
Attached devices:
I forgot to put the list in cc.
Gabriele Bulfon - Sonicle S.r.l.
Tel +39 028246016 Int. 30 - Fax +39 028243880
Via Felice Cavallotti 16 - 20089, Rozzano - Milano - ITALY
http://www.sonicle.com
Da: Gabriele Bulfon <[EMAIL PROTECTED]>A: MaxxAtWork <[EMAIL PROTECTED]> Data: 12 settembr
On Tuesday 12 September 2006 15:29, Silver Salonen wrote:
> On Monday 11 September 2006 16:56, Kern Sibbald wrote:
> > On Monday 11 September 2006 15:33, Silver Salonen wrote:
> > > On Friday 08 September 2006 14:29, Silver Salonen wrote:
> > > Actually the problem would be in files' paths - if a s
Hi, Janco
Try this:
#!/bin/sh
(for i in /dev/sg*; do
echo $i;
mtx -f $i inquiry 2>&1;
echo --;
done) \
| less
Assuming is connected correctly, this will give you which /dev/sg* is
you loader in.
search in the results something like this:
/dev/sg5
Product Type: Medium
Hi, I have an IBM LTO3 3581 autoloader on SuSE and the device to access the
autoloader is /dev/sg2
st*, nst* are for the tape drive using a driver.
The sg devices are "raw" scsi, accessible without any driver, so I can access
the autoloader this way:
/dev/sg1: Drive
/dev/sg2: Autoloader
Try the
On Monday 11 September 2006 16:56, Kern Sibbald wrote:
> On Monday 11 September 2006 15:33, Silver Salonen wrote:
> > On Friday 08 September 2006 14:29, Silver Salonen wrote:
> > Actually the problem would be in files' paths - if a snapshot is mounted
to
> > some other directory, the files' path
Shit..sorry, I missed that
Janco v.d Merwe
Network Administrator
Dunns Stores (PTY) Ltd
Switchboard: 011 541 3000
Direct: 011 541 3007
Fax: 086 632 1708
-Original Message-
From: Kern Sibbald [mailto:[EMAIL PROTECTED]
Sent: 12 September, 2006 14:22
To: bacula-users@lists.s
On Tuesday 12 September 2006 14:16, Janco van der Merwe wrote:
> Hi,
>
> I'm going to ask a really dumb question now, so please bear with me. We just
bought a Dell Power Vault 124 with a LTO 3 now the problem is that I don't
know what device the autoloader is specified in /dev.
>
> I have a
Hi,
I’m going to ask a really dumb question now, so please
bear with me. We just bought a Dell Power Vault 124 with a LTO 3 now the
problem is that I don’t know what device the autoloader is specified in /dev.
I have a nst0, nst0a, nst0l, nst0m as well as st0, st0a, st0l
and st0m.
I have already try "unmount" then "mount" commands and a restart of
daemon but nothing change.
regards,
Sylvain
Gavin Conway a écrit :
>>
>> So, a job 270 is still running and waiting for a new device ? I have
>> try the command "cancel jobid=270" "cancel job=270" "cancel 270" but
>> each time
>
> So, a job 270 is still running and waiting for a new device ? I have try
> the command "cancel jobid=270" "cancel job=270" "cancel 270" but each
> time it say : "Jobs not running" or something like that.
> I that others jobs which are automatically launch each day, but since
> Monday mornin
Hello,
our administrator is currently in holiday and I have a problem with our
backup system : bacula.
We use a powerVault 110T on a EMC² server with Dedian.
Friday, the backup was too large for our storage support. So I have try
to kill the job in the bacula console with "cancel" command and
To workaround the problem, I had to move the Director on the DB machine too.So now, the SD is still on Sun280R, all FD are around unchanged, and Director runs on the Solaris Intel together with Postgres, with a modified dir.conf to connect to the SD on the network.Maybe some bug with postgres whe
On Monday 11 September 2006 20:21, Jo Rhett wrote:
> Simple configuration. Disk backup. 30 volumes, 30 day retention,
> Recycle automatically.
>
> Pool {
> Name = clients_Pool
> Pool Type = Backup
> Recycle = yes # Bacula can automatically
> recyc
Hello Arno,
Could you either send me the new files as an attachment, or better yet make a
new tar.gz of the whole build directory with the new source, and I will
replace the old one in the Bacula distribution with what you send me?
Best regards,
Kern
On Monday 11 September 2006 23:56, Arno Le
.wow.probably the bug is on the Intel installation where postgres now resides?But...I have plenty of Intel installations running postgres, and I usually have no problem using the DB from any host.Do you have any clue to workaround the bug?
Gabriele Bulfon - Sonicle S.r.l
On Mon, 11 Sep 2006, Russell Howe wrote:
Alan Brown wrote, sometime around 11/09/06 16:05:
Personally: I have my phone on an unlimited data tariff
I wasn't aware such a thing existed in the UK, and certainly isn't all
that common around the world. A friend of mine was charged about £200
for
Comments/Questions below.
Richard
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of Arno Lehmann
> Sent: 12 September 2006 08:12
> To: bacula-users@lists.sourceforge.net; bacula-devel
> Subject: Re: [Bacula-devel] [Bacula-users] Can't get DVD
> w
Hello,
On Tuesday 12 September 2006 01:39, Don MacArthur wrote:
> Sorry to be so chatty-
>
> "Failure": when I eject the bacula boot cd, restart the server, after
> the POST when (I'm guessing) it tries to read from the drives I'm
> presented with a blank screen and a blinking underscore cursor i
On 9/12/06, Gabriele Bulfon <[EMAIL PROTECTED]> wrote:
iserver-dir: postgresql.c:77 db_open first timeiserver-dir: bsys.c:70 pthread_cond_timedwait sec=5 usec=0iserver-dir: bsys.c:77 pthread_cond_timedwait stat=145 ERR=Connection timed out
Huh... it seems the failure is during bmicrosleep(), when
I rised debug to 500.Before the I issue the "list volumes" on bconsole, I see a LOT LOT of debug about postgres selects going through very fine.Once I run the bconsole command I find this:iserver-dir: scheduler.c:253 enter find_runs()iserver-dir: scheduler.c:289 Got job: Enterprise Backupiserver-
On Tuesday 12 September 2006 09:12, MaxxAtWork wrote:
> Hello,
>
> I have a minor request/suggestion about documentation: would it be
> possible to generate the manual pages so that in the header or footer
> it is reported document name + chapter + bacula version?
> I ask this because e.g. right n
On 9/12/06, MaxxAtWork <[EMAIL PROTECTED]> wrote:
> Sorry, I'm no expert in postgres but what I would do is:
> - check google results for that postgres error
> - sniff deeper the net and have a look at packet contents, first logging a
> successful connection (e.g. that one from psql) to see what i
On 9/12/06, Gabriele Bulfon <[EMAIL PROTECTED]> wrote:
Trying psql was the first check I did when I saw the problem.As you suggested, I tried with snoop, and verified that the 280 was actually connecting to the correct machine.
So, I looked into the postgres.log of the remote db machine...and fou
Hi,
On 9/12/2006 4:35 AM, Support wrote:
> Dear All
>
> Is there a way to Cancel a job automatically (with a message) if it
> exceeds a certian size as a RunBeforeJob.
You could try a run before job where you pass the job name to it. From
that run before job script, call bconsole with a command
Trying psql was the first check I did when I saw the problem.As you suggested, I tried with snoop, and verified that the 280 was actually connecting to the correct machine.So, I looked into the postgres.log of the remote db machine...and found this :LOG: incomplete startup packetSo I monitor
Hello,
I have a minor request/suggestion about documentation: would it be
possible to generate the manual pages so that in the header or footer
it is reported document name + chapter + bacula version?
I ask this because e.g. right now I found a printout of the disaster
recovery chapter, but I real
Hi,
On 9/12/2006 5:19 AM, Scott Simpson wrote:
> bacula CVS version 2006-09-11
>
> I still can't get bacula to write to a DVD using the latest software on
> Kubuntu. Every time I run it I get
>
> dvd.c:432 Error writing part 1 to the DVD:
> ERR=Running /usr/bin/growisofs -use-the-force-luke=no
51 matches
Mail list logo
