Hi People.
Ok My HP Surestore Ultrium 230 is dead.
HP dosent want to repair because they say is old. Ok they offer me the HP StorageWorks Ultrium 232 because they say is compatible with my old one.
Them, some here can recomend me this tape drive or have good experienced with...?
OS:
On 4/25/06, DAve <[EMAIL PROTECTED]> wrote:
pedro moreno wrote:> On 4/24/06, DAve <[EMAIL PROTECTED]> wrote:>> pedro moreno wrote:>>> Hi people.>> I already install bacula
1.38.8 no FreeBSD setup my /etc/rc.conf>> file to>>> start bacula, that method is very good, but i have some problem
This is what you said Wolfgang Denk
> In message <[EMAIL PROTECTED]> you
> wrote:
>>
>> I was already using those options in my schedule. It looks like you are
>> saying to add the other pool options for each RUN statement. I had not
>> tried this. Are you already using this, and is it working?
In message <[EMAIL PROTECTED]> you wrote:
>
> I was already using those options in my schedule. It looks like you are
> saying to add the other pool options for each RUN statement. I had not
> tried this. Are you already using this, and is it working?
Yes, I'm using this. It's working fine for
This is what you said Wolfgang Denk
> In message <[EMAIL PROTECTED]> you
> wrote:
>>
>> How do I get a job that has been changed from incremental or
>> differentialto FULL to use the FULL storage device?
>
> Use the "FullPool" and "DifferentialPool" (and eventually
> "IncrementalPool") options, i.
In message <[EMAIL PROTECTED]> you wrote:
>
> How do I get a job that has been changed from incremental or
> differentialto FULL to use the FULL storage device?
Use the "FullPool" and "DifferentialPool" (and eventually
"IncrementalPool") options, i. e. something like this:
Schedule {
Name = "W
Hi,
On 4/25/2006 6:34 PM, Scott Ruckh wrote:
-
Bacula release 1.38.8
-
I thought I would ask this question again as I think it got lost inanother
topic.
I have a schedule that looks like the following:
Schedule {
Name = "WeeklyCycle"
Run = Level=Full Storag
pedro moreno wrote:
On 4/24/06, DAve <[EMAIL PROTECTED]> wrote:
pedro moreno wrote:
Hi people.
I already install bacula 1.38.8 no FreeBSD setup my /etc/rc.conf
file to
start bacula, that method is very good, but i have some problems every
time
i restart my system or try to stop
the b
-
Bacula release 1.38.8
-
I thought I would ask this question again as I think it got lost inanother
topic.
I have a schedule that looks like the following:
Schedule {
Name = "WeeklyCycle"
Run = Level=Full Storage=FSD_FULL FullPool=FULL-Pool 1st sun at 02:05
On 4/24/06, DAve <[EMAIL PROTECTED]> wrote:
pedro moreno wrote:> Hi people.>> I already install bacula 1.38.8 no FreeBSD setup my /etc/rc.conf file to> start bacula, that method is very good, but i have some problems every time
> i restart my system or try to stop> the bacula-dir.daemon.>> 1;
Thanks for the responses guys. I have an email in process to adic. If
they confirm it works with mtx I think I am going to go for it.
See ya.
On Apr 24, 2006, at 11:57 AM, John Boris wrote:
Brett,
I am using Bacula on Fedora Core 3 with the Dell 124T. It took me a
while to get it working but
On Tuesday 25 April 2006 16:52, Rudolf Cejka wrote:
> Kern Sibbald wrote (2006/01/19):
> > > --- src/dird/ua_label.c.orig Thu Jan 19 10:05:21 2006
> > > +++ src/dird/ua_label.c Thu Jan 19 10:07:50 2006
> > > @@ -305,7 +305,9 @@
> > > }
> > >
> > > if (!relabel && (i=find_arg_keyword(
Did you look, with for example wx-console, if the files you didn't want to be
backed up are indeed excluded to make sure if your fileset is or isn't the
problem
Pieter
--
View this message in context:
http://www.nabble.com/Backups-too-big%2C-and-other-questions-t1502635.html#a4083663
Sent from
Kern Sibbald wrote (2006/01/19):
> > --- src/dird/ua_label.c.origThu Jan 19 10:05:21 2006
> > +++ src/dird/ua_label.c Thu Jan 19 10:07:50 2006
> > @@ -305,7 +305,9 @@
> > }
> >
> > if (!relabel && (i=find_arg_keyword(ua, barcode_keyword)) >= 0) {
> > - *ua->argk[i] = 0;
This is what you said Pieter (NL)
>
> I use following filesets. First exclude in options and after that include:
>
> FileSet {
> Name= "bsdserver1 files"
> Include {
> Options {
> signature = MD5
> compression = GZIP
>
Hi Eric ,
Thanks for the advise , seems it was one of my MYI files that were
corrupt (Filename.MYI) to be exact , used myisamchk to repair.
Eric Warnke wrote:
You need to check you database logs, it could be space or permissions
but it's NOT bacula.
Cheers,
Eric
On 4/25/06, *Danie* < [EMAI
I use following filesets. First exclude in options and after that include:
FileSet {
Name= "bsdserver1 files"
Include {
Options {
signature = MD5
compression = GZIP
Exclude = yes
--
This is what you said John Kodis
> On Mon, Apr 24, 2006 at 06:50:33PM -0700, Scott Ruckh wrote:
>
>> I think I have found the culprit, /var/log/lastlog . It is a sparse
>> file and appears to be 1.2TB, which is way larger then the total
>> space of the filesystem, In reality, this file only u
Hello,
i have the same result as before.
Best regards
Frank Stuber
IT Manager
Telefon: +49. 7825. 849-214
Telefax: +49. 7825. 849-48 214
Email: [EMAIL PROTECTED]
janoschka GmbH
Mattweg 1
D-77971 Kippenheim
http://www.janoschka.com
"Eric Warnke" <[EMAIL PROTECTED]>
I know that bacula can be very strange about it's configs.. have you tried removing the semicolon off the end of those lines? Also, I though bacula prefered the /dev/nst device over the /dev/st device.Cheers,Eric
On 4/25/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]
> wrote:
Hello,
if I try the Aut
You need to check you database logs, it could be space or permissions but it's NOT bacula.Cheers,EricOn 4/25/06, Danie <
[EMAIL PROTECTED]> wrote:Query failed: CREATE TABLE temp (JobId INTEGER UNSIGNED NOT
NULL,JobTDate BIGINT UNSIGNED,ClientId INTEGER UNSIGNED,LevelCHAR,JobFiles INTEGER UNSIGNED,J
I've got it working. Problem is the array_merge function. For phplot I've
installed a newer version of phplot (rc2) from
http://www.sourceforge.net/projects/phplot/ in the external_packages/phplot
directory.
There are some other phpscripts i've adjusted
classes.inc:
bsdtest# grep -e "array_merge"
On Mon, Apr 24, 2006 at 06:50:33PM -0700, Scott Ruckh wrote:
> I think I have found the culprit, /var/log/lastlog . It is a sparse
> file and appears to be 1.2TB, which is way larger then the total
> space of the filesystem, In reality, this file only uses 64K of
> actual used disk space, but I a
On Mon, 24 Apr 2006, Scott Ruckh wrote:
I am excluding /BACKUPS in my file list so you can see I am not backing up
my backups.
VERIFY that this is happening. It is very easy to get the syntax wrong and
have /BACKUPS being backed up unintentionally.
I think I have found the culprit, /var/lo
Hello,
if I try the Autochanger Resource in the
Storage Deamon I've got the following error.
Here is my config.
Autochanger {
Name = "LTO-2_1"
Device = LTO-2_1-drive1
Changer Command = "/etc/bacula/mtx-changer
%c %o %S %a %d"
Changer Device = /dev/sg0
}
Device {
Name = "LTO-2_1-
On Mon, 24 Apr 2006, Eric Warnke wrote:
The Bad.
2) SQLite
SQLite is only really there for testing purposes and the odcumentation
makes it very clear that it's not recommended for production systems.
6) Does not track deletions between full backups.
Show me more than 3 (quite expensiv
When I try and do a restore I get the following error :
*restore
Using default Catalog name=MyCatalog DB=bacula
First you select one or more JobIds that contain files
to be restored. You will be presented several methods
of specifying the JobIds. Then you will be allowed to
select which files fr
Hi,
I'm new to bacula, basically looking for new OSS solution for backup.
The setup and basic tests went smooth, having some problems with
rotation config.
My current backup setup is GFS running on two sets of tapes (each set
runs every other day, no Sunday backups)
My question is what are my
28 matches
Mail list logo
