Antwort: Re: Re: [Bacula-users] Autoloader does not change tape

[frank . stuber]

Hello,

i have the same result as before.
   
   
   
Best regards

Frank Stuber
IT Manager

Telefon:    +49. 7825. 849-214
Telefax:    +49. 7825. 849-48 214
Email:        [EMAIL PROTECTED]

janoschka GmbH
Mattweg 1
D-77971 Kippenheim
http://www.janoschka.com

"Eric Warnke" <[EMAIL PROTECTED]> schrieb am 25.04.2006 14:50:43:

> I know that bacula can be
> very strange about it's
> configs.. have you tried
> removing the semicolon off
> the end of those lines?  
> Also, I though bacula
> prefered the /dev/nst device
> over the /dev/st device.
>
> Cheers,
> Eric

> On 4/25/06, [EMAIL PROTECTED]
> <[EMAIL PROTECTED] > wrote:
>
> Hello,
>  
> if I try the Autochanger
> Resource in the Storage
> Deamon I've got the following error.
>
> [Bild entfernt]
>
> Here is my config.
>
> Autochanger {
>   Name = "LTO-2_1"
>   Device = LTO-2_1-drive1
>   Changer Command =
> "/etc/bacula/mtx-changer %c
> %o %S %a %d"
>   Changer Device = /dev/sg0
> }
>
> Device {
>   Name = "LTO-2_1-drive1"
>   Drive Index = 0
>   Media Type = LTO-2
>   AutoChanger = yes
>   ArchiveDevice = /dev/st0
>   LabelMedia = no;
>   AutomaticMount = yes;              
>   AlwaysOpen = yes;
>   RandomAccess = no;
>   RemovableMedia = yes;
>  Alert Command = "sh -c
> 'tapeinfo -f %c |grep TapeAlert|cat'"
> #  Maximum Spool Size = 20000000000
> #  Spool Directory =
> /var/bacula/working/spool
> }
>
> I don't know what's going wrong.
>
>    
>    
> Best Regards
>
> Frank Stuber
> IT Manager
>
> Telefon:    +49. 7825. 849-214
> Telefax:    +49. 7825. 849-48 214
> Email:        Frank.
> [EMAIL PROTECTED]
>
> janoschka GmbH
> Mattweg 1
> D-77971 Kippenheim
> http://www.janoschka.com
>

>
> Michel Meyers <[EMAIL PROTECTED]>
> 06.04.2006 14:11
>
> An
>
> [EMAIL PROTECTED]
>
> Kopie
>
> bacula-users@lists.sourceforge.net
>
> Thema
>
> Re: [Bacula-users]
> Autoloader does not change tape
>
>
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> [EMAIL PROTECTED] wrote:
> >
> > Hello,
> > bacula-sd.conf
> >
> > Device {
> >   Name = "LTO-2_1"
> >   Drive Index = 0
> >   Media Type = LTO-2
> >   Archive Device = /dev/st0
> >   Changer Device = /dev/sg0
> >   Changer Command =
> "/etc/bacula/mtx-changer %c
> %o %S %a %d"
> >   AutomaticMount = yes;  
> # when device opened, read it
> >   AlwaysOpen = yes;
> >   RandomAccess = no;
> >   RemovableMedia = yes;
> >   AutoChanger = yes
> > #  Maximum Spool Size = 20000000000
> > #  Spool Directory =
> /var/bacula/working/spool
> > }
>
>
> Hello,
>
> Try using the newer
> AutoChanger Resource in the
> Storage Daemon:
> http://www.bacula.org/rel-
> manual/Autochanger_Support.
> html#SECTION000297000000000000000
>
> Did you test to see what
> results the manual mtx-
> changer commands achieve?
>
> Greetings,
>          Michel
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2
> (MingW32) - GPGrelay v0.959
>
> iD8DBQFENQV/2Vs+MkscAyURAte2AJ93SCDB7ImDXQDU0ulBzwLwo3WYbQCg9JuA
> xvPc5NohR5VfcPe3OEL4UOE=
> =+Z2h
> -----END PGP SIGNATURE-----