Hello,
Currently the Gigabit network of the ROCK64 media board
doesn't work with OpenBSD 6.3.
Is there a chance in further releases to get this work?
It would be great!
Best reagrds
Johannes Krottmayer
Hello,
Okay, this part is not maintained. But are there public
HowTo's availbable?
(I have a ROCK64 media board and i want to help, to
get the Gigabit network working.)
Best reagrds,
Johannes Krottmayer
Hello,
Sorry, for my bad spelling and the typos. It was a hard day for me.
And i'm not a native english speaker. But i think you can decipher
the content of my question.
The subject should be: Build the system "ON" a amd64 system
Best regards,
Johannes Krottmayer
On Thu, Jun 07
Hello,
Thanks for reply!
How can I do this (initial bring-up)?
I need it also for bare-metal programming of this board.
Want use the OpenBSD bootloader to boot my own real-time
operating system.
Best regards,
Johannes Krottmayer
On Thu, Jun 07, 2018 At 23:16:29 +0100, Stuart Henderson wrote
Hello Mark,
Thanks for the fast reply and this information!
I will try this steps.
Best regards,
Johannes Krottmayer
On Fri, Jun 08, 2018 At 00:20:30 +0200, Mark Kettenis wrote:
>> From: Johannes Krottmayer
>> Date: Thu, 7 Jun 2018 23:23:21 +0200
>>
>> Hello,
>
I want use the ARM port of OpenBSD for my
further electronic projects.
Best reagards,
Johannes Krottmayer
On Fri, Jun 08, 2018 At 00:28:30 +0200, Johannes Krottmayer wrote:
> Hello Mark,
>
> Thanks for the fast reply and this information!
> I will try this steps.
>
> Best re
Hello Mark,
I just installed OpenBSD sucessfully on the ROCK64 media board.
That's very cool. Thanks for your good statement.
Best reagards,
Johannes
On Fri, Jun 08, 2018 At 00:52:51 +0200, Johannes Krottmayer wrote:
> Hello Mark,
>
> I have an additional question. Don'
ins.
Best regards,
Johannes
On Fri, Jun 08, 2018 At 03:42:11 +0200, Johannes Krottmayer wrote:
> Hello Mark,
>
> I just installed OpenBSD sucessfully on the ROCK64 media board.
> That's very cool. Thanks for your good statement.
>
> Best reagards,
> Johannes
>
&
rror message "device is not configured".
Also when i try the devices gpio1 and gpio2.
How can I fix this?
On Fri, Jun 08, 2018 At 11:47:13 +0200, Mark Kettenis wrote:
>> From: Johannes Krottmayer
>> Date: Fri, 8 Jun 2018 03:54:37 +0200
>>
>> Hello Mark!
>>
Oh... Sorry, i have over read your text where you have
explained the state of the rkgpio.
On Fri, Jun 08, 2018 At 22:28:10 +0200, Johannes Krottmayer wrote:
> Hi Mark!
>
> Thanks for the answer. That's very pity.
>
> But i run in a other problem with the GPIO. I have wr
.
On Fri, Jun 08, 2018 At 22:35:24 +0200, Johannes Krottmayer wrote:
> Oh... Sorry, i have over read your text where you have
> explained the state of the rkgpio.
>
> On Fri, Jun 08, 2018 At 22:28:10 +0200, Johannes Krottmayer wrote:
>> Hi Mark!
>>
>> Thanks for the answe
ess
$
My next step is, to configure the spi bus and add a read and
write function.
What do you think about my intention?
Best reagrds
Johannes
On Sat, Jun 09, 2018 At 17:23:09 +0200, Johannes Krottmayer wrote:
> Hi Mark!
>
> I have installed the dtb package. And copied the rk3328-ro
Sorry, have forgotten to add a...@opnebsd.org to CC.
On Sat, Jun 09, 2018 At 23:50:18 +0200, Johannes Krottmayer wrote:
> On Sat, Jun 09, 2018 At 22:32:07 +0200, Mark Kettenis wrote:
>> Works fine for me, but my board is connected to a 100Mbit/s switch.
>>
>> I suspect t
On Sat, Jun 09, 2018 At 23:27:12 +0200, Mark Kettenis wrote:
>
> That's a very basic start in the right direction.
>
Thanks!
I'm new in OpenBSD driver and ARM development. I have
experience with AVR microcontroller and now I want use
OpenBSD for my embedded projects.
But today it is enough wi
Hello,
Is the HDMI output currently working for the ROCK64?
When I try to start Xorg over SSH, I get the following
error message:
$ startx
(EE)
Fatal server error:
(EE) xf86OpenConsole: No console driver found
Supported drivers: wscons
Check your kernel's console driver configur
Hi,
When I try to reboot the system, I get following at the
startup of the kernel:
---
Stopped at dwc_gmac_intr+0xcc:
ddb{0}> trace
0 at 0xff8000706278
dwc_gmac_intr() at handle_el1h_irq+0x6c
handle_el1h_irq() at main+0x36c
main() at $x.2+0x70
ddb{0}>
---
When I power up the board or th
Hello,
Is there an OpenBSD port for the Digilent Zybo Z7 ARM/FPGA
development board available? I know there is a FreeBSD port
for the previous model.
If not, is it hard to port OpenBSD to this platform?
UBoot port and the device trees are available for this
board.
Thanks in advance!
--
Best r
Thank you for ignoring me. I would like to know
what I did. How have I been disgraced?
But I don't give up.
In other words:
How can I figure out and fix this issue for my own,
please?
On 07.02.19 at 00:22, Johannes Krottmayer wrote:
> Hi,
>
> When I try to reboot the system, I
On 14.05.19 at 08:00, Fred wrote:
>
> Hi,
>
> https://www.openbsd.org/ddb.html
>
> Covers the info that the developers would require to be able to help.
>
Okay, I will give another try. This time with screenshots of the serial
console. An I hope, I get more detailed output with ddb.
> I've no
On 14.05.19 at 11:02, Stuart Henderson wrote:
> This isn't the right mailing list to report problems, and it is not very
> widely read. Please see https://www.openbsd.org/report.html and send to bugs@.
>
> In your other mail you mentioned a screenshot, just copy and paste instead.
>
> I haven
Hello,
I would like to start a driver project for the Waveshare RPi
TFT display to use it on ROCK64. Currently I use a clone of the
display from Elagoo.
Technical data:
- 320x480 screen resolution and 262K colors
- Ilitek ILI9486 display controller
- XPT2046 (ADS7846) touch screen ADC
Datasheets
21 matches
Mail list logo
