Hello Mark, Thanks for the fast reply and this information! I will try this steps.
Best regards, Johannes Krottmayer On Fri, Jun 08, 2018 At 00:20:30 +0200, Mark Kettenis wrote: >> From: Johannes Krottmayer <krj...@gmail.com> >> Date: Thu, 7 Jun 2018 23:23:21 +0200 >> >> Hello, >> >> Currently the Gigabit network of the ROCK64 media board >> doesn't work with OpenBSD 6.3. >> >> Is there a chance in further releases to get this work? >> It would be great! > > It works in -current. There is also DMA support for eMMV and uSD card > in -current. > > I flashed my board with the firmware provided by "ayufan" that can be > found at: > > https://github.com/ayufan-rock64/linux-build/releases > > The device tree embedded in that firmware doesn't provide the proper > speed for the serial console. Therefore when you boot the board after > installing it the boot messages will not show up on the serial > console. You can fix this by installing the dtb package and doing > > # mount /dev/sdXi /mnt > # mkdir /mnt/rockchip > # cp /usr/local/share/dtb/arm64/rockchip/rk3328-rock64.dtb /mnt/rockchip > # umount /mnt > > You should also check the /etc/ttys file and change the console entry > from std.115200 into std.1500000 if necessary. > > I'll see if I can get that issue fixed. > > Cheers. > > Mark >
