nterfaces are both supported. Why
>> are the interfaces not showing up in "ifconfig" output?
>>
>>
>> # ifconfig
>> lo0: flags=8008 mtu 32768
>> llprio 3
>> groups: lo
>> # dmesg
>> OpenBSD 6.7 (RAMDISK) #572: Thu May 7 14:08:02 MDT 2020
>> dera
SK
real mem = 958050304 (913MB)
avail mem = 895766528 (854MB)
mainbus0 at root: Raspberry Pi 3 Model B Plus Rev 1.3
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
e
On 2020-05-26 14:44, Mark Kettenis wrote:
Date: Tue, 26 May 2020 14:15:52 -0700
From: Joe Barnett
I have tried installing 6.7 (arm64) onto my Raspberry Pi 3 and it
consistently fails to boot following what appears to be a successful
installation.
I am installing from miniroot67.fs (again, for
> Date: Tue, 26 May 2020 14:15:52 -0700
> From: Joe Barnett
>
> I have tried installing 6.7 (arm64) onto my Raspberry Pi 3 and it
> consistently fails to boot following what appears to be a successful
> installation.
>
> I am installing from miniroot67.fs (again, for
I have tried installing 6.7 (arm64) onto my Raspberry Pi 3 and it
consistently fails to boot following what appears to be a successful
installation.
I am installing from miniroot67.fs (again, for arm64), the installation
appears to be successful, and I am presented with "CONGRATULATIONS!
On Sunday, September 30, 2018 8:25 PM, Andrey Melentyev
wrote:
> OpenBSD -current doesn't boot on Raspberry Pi 3 Model B+.
> Tried snapshots from 2018-09-25, 2018-09-26 and 2018-09-30.
>
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> FDT memrsv map 0: Failed to add to map
Hello,
OpenBSD -current doesn't boot on Raspberry Pi 3 Model B+.
Tried snapshots from 2018-09-25, 2018-09-26 and 2018-09-30.
The hardware setup is: raspberry pi 3b+ is connected to a laptop
using serial console via PL2303HX. There are no more devices
plugged into the pi, except for the mi
On Wed, 13 Dec 2017 21:51:43 +0200
Hannu Vuolasaho wrote:
> Hello!
>
> I have OpenBSD running on the RPi 3. Unfortunately SD card isn't supported
> so I run from USB stick like everybody else. My blazing fast USB stick is
> really slow on RPi :( So I have some motivation to scratch my itch.
btw
nd
https://www.riscosopen.org/forum/forums/9/topics/10637?page=2
And finally the dmesg of OpenBSD 6.3-current on Raspberry Pi 3
Model B+ (PLUS). The lines different to the 3B (without +) booted
with the same image are marked with an asterisk "*":
OpenBSD 6.3-current (RAMDISK) #224: Fri
On Wed, Mar 28, 2018 at 06:44:10PM -0700, Juan J. Natera wrote:
> Hi,
>
> Have there been any progress in this regard? I would love to help out if it
> hasn't.
>
> I just got a raspberry pi 3b+ that I would like to use with OpenBSD.
>
> Also, what about the wireless interface, is it supported?
>
Hi,
Have there been any progress in this regard? I would love to help out if it
hasn't.
I just got a raspberry pi 3b+ that I would like to use with OpenBSD.
Also, what about the wireless interface, is it supported?
Thanks,
JJ
On Wed, Dec 13, 2017 at 2:54 PM, Mark Kettenis
wrote:
> > From:
> From: Hannu Vuolasaho
> Date: Wed, 13 Dec 2017 21:51:43 +0200
>
> Hello!
>
> I have OpenBSD running on the RPi 3. Unfortunately SD card isn't supported
> so I run from USB stick like everybody else. My blazing fast USB stick is
> really slow on RPi :( So I have some motivation to scratch my it
nu Vuolasaho
>
> OpenBSD 6.2-current (GENERICSD) #7: Sun Oct 15 12:20:21 EEST 2017
> vuolasah@openrpi..duckdns.org:
> /usr/src/sys/arch/arm64/compile/GENERICSD
> real mem = 964972544 (920MB)
> avail mem = 909017088 (866MB)
> mainbus0 at root: Raspberry Pi
ICSD
real mem = 964972544 (920MB)
avail mem = 909017088 (866MB)
mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
cpu0 at mainbus0: ARM Cortex-A53 r0p4
simplefb0 at mainbus0: 656x416
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0 added (std, vt100 emulation)
simplebus0 at mainbus0: "soc"
> >> Regards
>> >>
>> >>
>> > OpenBSD 6.2-beta (GENERIC) #18: Tue Sep 19 03:48:00 MDT 2017
>> > dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC
>> > real mem = 964988928 (920MB)
>> > avail mem = 909037568 (
bsd.org:/usr/src/sys/arch/arm64/compile/GENERIC
> > real mem = 964988928 (920MB)
> > avail mem = 909037568 (866MB)
> > mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
> >
> > is running: http://rpi3.crowsons.com/ with OpenBSD.
> >
> > So yes the Raspberr
ds
>>
>>
> OpenBSD 6.2-beta (GENERIC) #18: Tue Sep 19 03:48:00 MDT 2017
> dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC
> real mem = 964988928 (920MB)
> avail mem = 909037568 (866MB)
> mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
>
&g
= 909037568 (866MB)
mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
is running: http://rpi3.crowsons.com/ with OpenBSD.
So yes the Raspberry Pi 3 Model B does work with OpenBSD.
Cheers
Fred
PS I've been lazy so it's not running the latest snapshot :~)
Hi
Has anyone tried running openbsd on raspberry pi model b?
Regards
--
I have seen the Future and I want to code it.
continued
selection of USB wifi is essential .
my run0 did not work .
-
regards
many PC ---(wifi)--->rum0:raspberry:smsc0---(wired LAN)--->internet
# ./comment-out.bat /etc/hostname.smsc0
dhcp
# ./comment-out.bat /etc/hostname.rum0
awk: can't open file /etc/hostname.rum0
source line number 1
# ./comment-out.bat /etc/rc.conf.local
dhcpd_flags=
pf=YES
sorry , i forgot the subject , so i resend.
---
i try arm64 on raspberry pi 3 .
1st time i use only micro sd , i failed.
the message is 'Available disks are: none.'
then 2nd time
i use micro sd card and usb's sd card reader .
the i can finish all install process .
but it can n
23 matches
Mail list logo
