Re: crashes on orangepi pc2

2019-01-31 Thread s_graf
I managed to change the Armbian dtb to set the cpu voltage to 1.3v: sypwr0 at iic0 addr 0x65: 1.30 VDC But it did not change anything - still crashes in perl when trying to add packages. Does the openbsd kernel change cpu power and speed to minimize power consumption? -Original Message-

Re: armv7: OpenBSD-current on Lichee Pi Zero (Allwinner V3s)

2019-01-31 Thread Jonathan Gray
On Thu, Jan 31, 2019 at 11:50:25PM +0900, SASANO Takayoshi wrote: > Hello, > > Recently I bought Lichee Pi Zero board, it has Allwinner V3s. > > I tried to run OpenBSD-current, some devices are recognized and > others are not recognized. Both bsd.rd and bsd didn't work > when attaching microSD/ra

Re: crashes on orangepi pc2

2019-01-31 Thread Sebastian Benoit
Mark Kettenis(mark.kette...@xs4all.nl) on 2019.01.31 20:20:21 +0100: > > From: > > Date: Thu, 31 Jan 2019 11:04:25 -0800 > > > > It seems to be related to network usage, although I cannot confirm that. > > Interesting... > > The crash always seems to involve perl as far as I can tell. I've > s

Re: crashes on orangepi pc2

2019-01-31 Thread Krystian Lewandowski
Wiadomość napisana przez s_g...@telus.net w dniu 31.01.2019, o godz. 21:57: > > I borrowed the dtb from the Armbian system (attached file) and it ran for > quite a bit longer than with the > stock dtb, but then crashed in the middle of adding php. It got through > adding nano and wget. > > The

Re: crashes on orangepi pc2

2019-01-31 Thread s_graf
I borrowed the dtb from the Armbian system (attached file) and it ran for quite a bit longer than with the stock dtb, but then crashed in the middle of adding php. It got through adding nano and wget. The Armbian dtb also exposed the temperature sensors and the gpio voltage controller: sypwr0 a

Re: crashes on orangepi pc2

2019-01-31 Thread Artturi Alm
On Thu, Jan 31, 2019 at 08:20:21PM +0100, Mark Kettenis wrote: > > From: > > Date: Thu, 31 Jan 2019 11:04:25 -0800 > > > > It seems to be related to network usage, although I cannot confirm that. > > Interesting... > > The crash always seems to involve perl as far as I can tell. I've > seen it

Re: crashes on orangepi pc2

2019-01-31 Thread Mark Kettenis
> From: > Date: Thu, 31 Jan 2019 11:04:25 -0800 > > It seems to be related to network usage, although I cannot confirm that. Interesting... The crash always seems to involve perl as far as I can tell. I've seen it crash in the daily job as well. That doesn't rule out there is some network-rel

Re: crashes on orangepi pc2

2019-01-31 Thread s_graf
It seems to be related to network usage, although I cannot confirm that. As to the unstableness, I loaded Armbian, download, installed and ran xfce and Firefox, all without problems. Something else that I notice is that the boot sometimes fails and I have to power off and on again to get it goi

Re: crashes on orangepi pc2

2019-01-31 Thread Patrick Wildt
On Thu, Jan 31, 2019 at 11:26:48AM +0100, Mark Kettenis wrote: > > From: > > Date: Wed, 30 Jan 2019 23:11:00 -0800 > > > > I thought I would give openbsd arm64 a try and purchased an orangepi pc2. > > I followed the INSTALL directions and the install of the system went > > smoothly. > > I used th

armv7: OpenBSD-current on Lichee Pi Zero (Allwinner V3s)

2019-01-31 Thread SASANO Takayoshi
Hello, Recently I bought Lichee Pi Zero board, it has Allwinner V3s. I tried to run OpenBSD-current, some devices are recognized and others are not recognized. Both bsd.rd and bsd didn't work when attaching microSD/ramdisk. I attach the log of bsd, built from recent source tree on pcDuino. What

Re: crashes on orangepi pc2

2019-01-31 Thread Mark Kettenis
> From: > Date: Wed, 30 Jan 2019 23:11:00 -0800 > > I thought I would give openbsd arm64 a try and purchased an orangepi pc2. > I followed the INSTALL directions and the install of the system went > smoothly. > I used the lan connection at 1000Mbps to load the system install packages. > > Simple