El Jueves, 22 de Junio de 2006 10:36, Matthias Koenig escribió:
> MNO <[EMAIL PROTECTED]> writes:
> > Now, the 4x4 is on the hardware list, and there it says that it is
> > supported, but in a discussion on the another list I came to the
> > conclusion that the 4x4 needs to load firmware.
>
> Yes,
MNO <[EMAIL PROTECTED]> writes:
> Now, the 4x4 is on the hardware list, and there it says that it is
> supported, but in a discussion on the another list I came to the
> conclusion that the 4x4 needs to load firmware.
Yes, the Midisport 4x4 needs firmware. You can get the complete
package with in
Hello everyone,
I have a question regarding the Midisport 4x4. And i'll try to be as
complete as possible to place my question.
Now, the 4x4 is on the hardware list, and there it says that it is
supported, but in a discussion on the another list I came to the
conclusion that the 4x4 needs to load
hi all
i'm having trouble with my midisport 8x8. i can get it working fine if i
boot into windows, load the firmware, then back into linux without
powering it down, but i can't get the firmware loaded in linux. here's
what apppears in /var/log/messages:
Feb 20 17:10:26 [kernel] hub.c: connect-debo
[EMAIL PROTECTED] wrote:
> it seems that the m-audio midisport devices now come with new
> drivers (both on t he supplied cd and on the website) that do no
> longer work with extractfirmware
I uploaded a new version of the loader package last Friday. Please
complain loudly if that one doesn't wor
Hi Wolfgang,
Am Sam, den 14.02.2004 schrieb [EMAIL PROTECTED] um 19:04:
> Hi,
>
> it seems that the m-audio midisport devices now come with new drivers (both on t
> he
> supplied cd and on the website) that do no longer work with extractfirmware
>
> Any way to go further? (or maybe someone got c
Hi,
it seems that the m-audio midisport devices now come with new drivers (both on t
he
supplied cd and on the website) that do no longer work with extractfirmware
Any way to go further? (or maybe someone got copies of the old driver files to s
hare)
Wolfgang Hamann
---
PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Ivica Bukvic
> Sent: Tuesday, February 25, 2003 3:26 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: [Alsa-user] Midisport 2x2 spawns before Alsa, taking the
> device0 slot event though modules.conf puts snd-usb-midi as 3rd de
Hi all,
I was just wondering how can I force snd-usb-midi to assume device 2
slot, rather than the default 0 when spawning, since at boot time on my
machine USB gets initialized before alsa and therefore if I have
Midisport 2x2 hooked up, it ends up being my default /dev/dsp device
(which actually
> Use virmidi to access all ports. We cannot map all rawmidi device to the
> OSS's address space.
>
> Jaroslav
Ah thanks, I was confused by the hdsp card showing up as 2 midi devices,
and I didn't know about virmidi.
I'm following this howto now:
ht
On Fri, 21 Feb 2003, Johannes Taelman wrote:
> Hi all,
>
> I'm trying to setup my midiman usb midisport 4X4. The driver seems to be
> installed correctly:
>
> #xi:/home/johannes# cat /proc/asound/cards
> # 0 [DSP]: H-DSP - Hammerfall DSP
> # RME Hammerfall DSP (M
Hi all,
I'm trying to setup my midiman usb midisport 4X4. The driver seems to be
installed correctly:
#xi:/home/johannes# cat /proc/asound/cards
# 0 [DSP]: H-DSP - Hammerfall DSP
# RME Hammerfall DSP (Multiface) at 0xf380, irq 5
# 1 [4x4]: USB-Audi
Olaf Giesbrecht wrote:
> i have redhat 7.3 with alsa 0.9 [...] and the midisport 8x8 as an usb
> midi-interface and i do not get the midi interface to work. would
> could i have done wrong ? i thing the firmware-upload has problems
>
> when i start the midi-interface (turn on power), i get the foll
Olaf,
Are you sure the firmware patch applies to the 8x8?
I believe it applies to the 2x2 and 4x4 which if I
recall from reading mailing list posts both have the
same chipset. I don't recall the 8x8 being mentioned
as having that same chipset. Am I unaware of somthing?
I also have an 8x8 and so
i have redhat 7.3 with alsa 0.9 and i run a terratec
ews88mt/ice1712/envy24 as pci-soundcard(the analog devices are not
working yet, but that is another problem...) and the midisport 8x8 as an
usb midi-interface
and i do not get the midi interface to work. would could i have done
wrong ? i thing t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am Dienstag, 7. Januar 2003 15:58 schrieb Clemens Ladisch:
> I've had at least one report that it's working. The only
> problem is that you have to care about downloading the
> firmware at all. (And you need to have some recent version
> of the hotplu
[EMAIL PROTECTED] wrote:
> I have a problem with Midisport UNO too. It is not the
> same product than Midisport 1x1 that Alsa supports,
>From the driver's point of view, it is.
> and I have been unable to make it work.
Please check that you have recent versions of the hotplugging scripts and
fxl
Christoph Eckert wrote:
> on
> http://www.informatik.uni-halle.de/~ladischc/midisport_linux_firmware.html
> I read a hack how to use the win drivers of MIDISport Uno
> with linux, thanks to the author.
>
> Can anyone here tell me that this is working or if there are
> any problems?
I've had at lea
Hello,
I have a problem with Midisport UNO too. It is not the
same product than Midisport 1x1 that Alsa supports, and
I have been unable to make it work.
I have tested the various possibilities:
http://www.informatik.uni-halle.de/~ladischc/midisport_linux_firmware.html
http://member.nifty.ne.jp/B
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
on
http://www.informatik.uni-halle.de/~ladischc/midisport_linux_firmware.html
I read a hack how to use the win drivers of MIDISport Uno
http://www.midiman.de/msuno.htm
with linux, thanks to the author.
Can anyone here tell me that this is wo
20 matches
Mail list logo
