Hi, thanks for the response. I suspect that I may need a mic pre-amp, I
read this from my soundcard manual:
The jack farthest from the volume knob is the line-level stereo input,
which is set to a fixed nominal gain of –10 dbV.
On Fri, Jan 6, 2012 at 8:20 AM, Giuliano Pochini wrote:
> On We
On Wed, 4 Jan 2012 14:20:38 -0800
Colin Kincaid Williams wrote:
> Hi, I can't capture sound with my echo indigo io soundcard. I've checked
> and the capture is not muted. So far the steps I've taken are detailed
> here: http://forums.debian.net/viewtopic.php?f=6&t=74415
Audio input cannot be mut
Hi, I can't capture sound with my echo indigo io soundcard. I've checked
and the capture is not muted. So far the steps I've taken are detailed
here: http://forums.debian.net/viewtopic.php?f=6&t=74415
--
Ridiculously easy V
Hi.
It looks like since kernel 3.1 I can't capture anything from laptop
internal microphone. Rebooting back to 3.0.x fixes issue.
Alsa-info:
3.1: http://www.alsa-project.org/db/?f=0d7049d8892542ef89b7a3c40df2b1fd6b194282
3.0: http://www.alsa-project.org/db/?f=4792cc6c466c1dd5d01e2a80df1189ea5e34
Hi,
just today i think i know what the problem was:
First, i've only set "Line" to "Capture".
Now, i've also set "Capture" to "Capture", this seems to solve the problem.
This brings up another question for me:
WHAT CONTROL CONTROLS WHICH BEHAVIOUR?
Is there something like a data flow diagram
Hi!
I don't know, how much inputs your card has and how they are controlled by
alsa. but I had a similar problem myself. Have you tried to mute the
microphone or at least disable its capture-switch. Then do you have something
like: input/output-gain (in alsamixer they would be very much to the ri
Hi everybody,
i can't seem to get my Hoontech DIgital-XG to capture
sound.
It plays just fine, but capture only brings quietness.
The output of the card is connected to an amplifier.
When i connect the input of the card to a CD player,
i can hear the CD sound in the amplifier.
I've set alsamixer
I have an RME96-8/pst and also a Hammerfall lite and am unble to
capture with either. I'm running Alsa from CVS on kernel 2.4.19. I
have been trying for quite a while to caputure successfully but have
had no luck. The card always reports "no valid signal" though I am
certain it is getting o
Hi all,
Since upgraded from b7 to b9, I am unable to capture with
aplay or a similar OSS utility with an sb-live. It just
records silence (all 0) with no errors. I think it must be
a mixer setting but am not sure which.
Capture volume is set to 8 of a possible 15
Ac'97 capture volume is set to
