Hey, I'm trying to resolve teething issues on a new motherboard,
Sound plays but I can't configure it with alsamixer, I need to boost the
gain before I have to solder together a +6db line amp...
Alsamixer dies with following when I try to configure "card 2"
tg@tortoise ~ $ alsamixer
cannot load
Hi All,
I modded a Lenovo laptop X61s to get spdif out (from pin 48 on the ad1984 chip
on the mobo via condensatator of 0.1. mf to a bns plug etc.)
With Lubuntu 13.10 – alsamixer version 1.0.27.1—Alsamixer gives spdif options
and it works perfect.
With lubuntu 14.4.1 (and betaversion 14.10) -
I was able to gather enough data to properly go through all the options
for my chipset and codecs. I also found the bugtraq that perfectly
describes the issue I have with teh snd-hda-intel driver. It would appear
that the Alsa 1.0.11 worked plug and play as best as it could out of the
box. Wi
Ok, so for the snd-hda-intel it says I can force my "model"
The model section that has what I thin I have on my laptop is 3 jack (HP
shared SPDIF, z71v option)
ALC880
3stack3-jack in back and a headphone out
3stack-digout 3-jack in back, a HP out and a SPDIF o
On Wed, 2006-06-21 at 12:46 -0700, Nick Ellson wrote:
> I am still unable to find out if I am missing functionality using the Alsa
> drivers on my laptop with the HDA ICH7 sound chipset.
>
> Should Alsa mixer show more than the MASTER and PCM controls for playback?
>
> I am getting sound, it is
I am still unable to find out if I am missing functionality using the Alsa
drivers on my laptop with the HDA ICH7 sound chipset.
Should Alsa mixer show more than the MASTER and PCM controls for playback?
I am getting sound, it is just very low compared to the same file playback
on Windows XP o
On Tue, 2006-05-09 at 17:24 -0400, Weevil wrote:
> hello,
>
> i installed slax 5.1.4 to my harddrive which isn't recommended since
> it's a live cd. unfortunately, it was the only linux so far that ran
> my laptop stablely. livecd worked fine for sound, detected my audigy2
> zs pcmcia. after the h
hello,i installed slax 5.1.4 to my harddrive which isn't recommended since it's a live cd. unfortunately, it was the only linux so far that ran my laptop stablely. livecd worked fine for sound, detected my audigy2 zs pcmcia. after the hdinstall some music apps complain that they cannot find the mix
Hi!
When I try the new kernels (later than 2.6.11) I get my jack-problems, which
still aren't resolved.
And I can't use envy24control, for I'm blind. But alsamixer worked before. I
remember that Takashi fixed it once (in 0.9.6 or something) and from then on
no problem.
By the way, I used corr
On Mon, 2006-02-20 at 08:56 +0100, Julien Claassen wrote:
> uname -a:
> Linux bach 2.6.11.8 #1 Mon May 30 23:30:13 CEST 2005 i686 unknown
>
> /proc/asound/version:
> Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13
> 09:39:32 2005 UTC).
>
> alsa-lib and alsa-utils version is 1.0
Hi everyone!
I still do have the same problem. My alsamixer is buggy and I can't fix that
problem myself. Also I still can't set the ipga-analog volumes, but I couldn't
do that since 2.6.10 kernels. Here I gathered all info I thought necessary
(and perhaps more than that :-))
uname -a:
Linux bac
Hi
I'm running Slackware 9.1 on a machine with a pretty much standard
Realtek AC/97 onboard soundcard, and the problem is that the alsa-mixer
doesn't save the settings. This is just very annoying.
When I installed the system I run 'alsamixer' as root, set the sliders
and then run 'alsactl stor
Ingvald Johansen wrote on 2/26/2004 15:02:
> 'amix' but 'which amix' didn't return any results. I have set the volume
> in gnome using the gnome-mixer in my non-priviliged user-account, but
> everytime I log into X I have to set it all over again.
You need to run alsactl restore at startup, e.g.,
Myk wrote:
On Thu, 15 Jan 2004 16:44:36 -0500 (EST)
Joe Budafuco <[EMAIL PROTECTED]> wrote:
Just finished installing Kernel 2.6.1 and the Alsa
module.
Sound works great but everytime I reboot (and the
modules are reloaded) the volumes are all set to zero
and muted. I have to run alsamixer and
On Thu, 15 Jan 2004 16:44:36 -0500 (EST)
Joe Budafuco <[EMAIL PROTECTED]> wrote:
> Hi:
>
> Just finished installing Kernel 2.6.1 and the Alsa
> module.
>
> Sound works great but everytime I reboot (and the
> modules are reloaded) the volumes are all set to zero
> and muted. I have to run alsami
Thursday Jan 15 16:44:36 -0500 2004 Joe Budafuco <[EMAIL PROTECTED]> wrote:
> Hi:
>
> Just finished installing Kernel 2.6.1 and the Alsa
> module.
>
> Sound works great but everytime I reboot (and the
> modules are reloaded) the volumes are all set to zero
> and muted. I have to run alsamixer an
Hi:
Just finished installing Kernel 2.6.1 and the Alsa
module.
Sound works great but everytime I reboot (and the
modules are reloaded) the volumes are all set to zero
and muted. I have to run alsamixer and turn them back
on. Is there a config file for alsamixer that can be
read when the module
What are the PCM and Master level settings when using the intel8x0 driver for
unity gain, that which causes no volume processing to be done?
Thanks.
Chris
---
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts ov
At Tue, 4 Feb 2003 22:35:04 -0700 (MST),
Greg Watson wrote:
>
> Hi All,
>
> Can someone tell me if Alsa has support to make mixer "groups?" For
> example, I'd like to group all the wave * channels (wave, wave center,
> wave surround, etc) into a group and map that to PCM. So I can then use
> os
Hi All,
Can someone tell me if Alsa has support to make mixer "groups?" For
example, I'd like to group all the wave * channels (wave, wave center,
wave surround, etc) into a group and map that to PCM. So I can then use
oss-mixer to adjust the digital volume. I have a SBLive 5.1 using Emu10k1
ca
Hello!
I don't know very much about the via chip, but as I told you, I also had a
lot of problems with my mic. But maybe you might try to use aumix, which is an
ossmixer. Remember to load the oss-simulation (oss-*). But if you have a real
sb16 or another (not onboard) card, better use that one, f
Thanks to Julien Claassen, my mic record is now working and with boost
on, is stonger.
But, there is one thing I do not understand concerning the mixer. On the
oss Sound Blaster model, mic had it's own individual volume control,
which effects record level, and then a master record volume contro
OK, I now have the sound working finally, but using Alsa mixer to set the
volumn is a little backward. Is there anyway to get the Inspiron 8100 volumn
control buttons to work to do this?
Art
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.
23 matches
Mail list logo
