ed as well.
startosslayer=true
It had been set to false. But in the past that had never stopped the
modules from being loaded.
digger
On Wed, 2004-03-24 at 12:07, Gabriel Ebner wrote:
> Hello,
>
> Am Mittwoch, 24. MÃrz 2004 17:23 schrieb digger vermont:
> > I just switched to
Hello All,
Not sure whether to take this to this list or a hotplug list. I'm
subscribed to this one so...
I just switched to udev from devfs on a powerbook. Kernel is 2.6.4 and
udev is version 022. The snd-mixer-oss and snd-seq-oss are not being
loaded at boot nor are /dev/sound/* and li
Hi Simon,
I have a powerbook g4. This might be a simple solution. If something
else like esd is using the device I've seen aplay behave the way you
describe. You might try:
lsof /dev/dsp
lsof /dev/snd/pcmC0D0p
or something like that to see if the port is being used.
Go
w or where I can use them.
Thanks,
digger
On Sat, 2004-02-28 at 20:09, digger vermont wrote:
> Hello Alain,
>
> Thanks for your reply.
>
> On Fri, 2004-02-27 at 03:13, Alain CrÃtet wrote:
> > Hi digger,
> >
> > The 'PCM Capt' control is th
evel is low. The only control that seems to have
any effect is 'Mic'.
In macosx at a normal speaking level I can easily drive the recorded
level into clipping. With alsa and linux I have to shout to get near
there.
Not that I want to cause clipping, but I need to record some low level
sound
Hello all,
I've a Vxpocket V2 I'm using on a powerbook g4 with alsa 1.0.2c. Using
arecord, the recorded level with a mic (Shure SM57) is low about -30db.
The 'PCM Capture Volume' which I think is supposed to be the
digital-gain or the mic-preamp seems to have no effect. Is this
control
Hi Robert,
In my case I solved it with this:
alias snd-card-0 snd-powermac
alias snd-card-1 snd-vxpocket
options snd-powermac index=0
options snd-vxpocket index=1
digger
On Tue, 2004-02-24 at 14:33, Robert Rozman wrote:
> Hi,
>
> I don't know what I did (if I did) but my two cards ha
Hello All,
I have a powerbook using the powermac snapper module with alsa 0.9.4.
To my knowledge there is no support for either the internal mic or
recording.
It seems that the snapper has been around for awhile. Will the
recorcding functions ever be supported? I'm curious, is
