One more funny thing when playing a 44k mono signal, there is no output
on spdif, and neither is there on the DAC.
Some soft squishing noises perhaps, but nothing more. Maybe the 44 k
reported by xmms is not exact. Or maybe mono is the problem?
Cheers,
Thomas
Takashi Iwai wrote:
>
>Done. Now committed cvs.
>please give a try.
>
Sorry for responding so late. Here are the results for the cmipci driver
cvs version as of today:
I see no way to listen to a signal on the digital input.
In a standard setting, there is no signal on the normal analog output
Takashi Iwai wrote:
>
>- Disable all "IEC958 *" switches except for "IEC958 Output Switch"
> (probably "IEC958 5V" too)
>- run "aplay -Dhw:0,2 foo.wav" and get dump from
> /proc/asound/card0/cmipci.
>
This works: I get output on analog and on spdif. Hurray!
Some further experiments: setting ie
Takashi Iwai wrote:
>
>Hmm, did I ever write such a statement?
>Please check my reply to your last post with the register dump.
>Your info was really appreciated.
>
My fault for taking objection. Excuses.
>
>My RTFM post was not directed to you.
>I've seen many bug reports (strangely suddenly at
James Courtier-Dutton wrote:
>If you read posts from the alsa-devel list, you would see lots of
advice on
>how to get it to work, apart from just RTFM.
>
True. But it didn't work for me. The first time I posted a bug report I
got the RTFM response. I did, and after a while came: yeah, spdif
d
>
>
>
>
>ok, obviously there have been enough problems regarding $SUBJECT.
>I don't think that all bug reports on ML are really one, though.
>So, please check the following if you have encountered this problem.
>
>
>
>1. For playing through SPDIF, you need to use the 3rd device,
>namely,
>
Takashi Iwai wrote:
>
>Ok, please try the following configuration:
>
> IEC958 5V enabled
> IEC958 Copyright muted
>* IEC958 DAC To Out muted
>* IEC958 In Monitor enabled
>* IEC958 In Phase Inverse muted
> IEC958 In Valid muted
> IEC958 Loop muted
>* IEC958 Out To DAC enabled
> IEC958 Output
Takashi Iwai wrote:
>
>It'd appreciated if you can send me register dumps for both OSS and
>ALSA drivers.
>
With Alsa loaded, playing a 44.1 KHz mp3. IEC settings in Alsamixer:
IEC958 5V enabled
IEC958 Copyright muted
IEC958 DAC To Out enabled
IEC958 In Monitor muted
IEC958 In Phase Inverse ena
Hi Olivier ,
>
> I have a cmi 8738 card and would like to use the spdif in/out
>features. The driver from cmi is not ready for this, so I downloaded
>the last CVS version of alsa; 2002-01-11.tar.bz2, compiled it,
>
> inserted the module trying "playback_spdif=yes" or "spdif_enable=yes"
>with
Uwe Weissbach wrote:
>I have the same problem with my winfast 6x.
>I think it's not about the a new chip revision but
>the implementation of Leadtek..
>
I doubt it. My card is a 'trust'. Besides there is little to implement
as everything is in one chip. I'm suspecting it is a dependency on
some
[EMAIL PROTECTED] wrote:
>
>i.m using a winfast cm8738 sound card with digital addon board.
>i.d like to use the digital output to pipe ac3 signals from the
>dvb-s sat board to my dd receiver.
>
>i can.t playback clear sound thru the digital output
>(eg. madplay /mp3/test.mp3). i have VERY bad h
Thomas Tonino wrote:
> The option "IEC958 Output Switch" indeed neatly enables the digital
> output with a quiet signal. When I enable the "IEC958 DAC To Out"
> switch I get very distorted output. I'm using XMMS or MPG123 with OSS
> emulation.
I star
Takashi Iwai wrote:
>
>For output of PCM over SPDIF, you need to turn on only "IEC958 Output
>Switch". Please check alsa-driver/docs/CMIPCI.txt for more details.
>
The option "IEC958 Output Switch" indeed neatly enables the digital
output with a quiet signal. When I enable the "IEC958 DAC To Ou
13 matches
Mail list logo
