ok,
i'm making some progress (forcing ogle to go to dev 0 subdev
0 worked).
BUT i can't seem to get any AC3 audio on my amp, and i think
it's because the card(and/or driver) won't change the
"Original" setting
i hacked iecset and added
iec958.status[1]=0x82;
(which sets IEC958_AES1_CON_ORI
sorry, but i'm still stuck.
mplayer doesn't work w/ -ao alsa9
aplay works w/ -D hw:0,0 and hw:0,2
> the IEC958 control is assigned to device 0.
> well, it's not nice to have such an incosistency.
> but usually it's no problem because the difference is absobed in the
> alsa-lib's configuration i
Clemens Ladisch wrote:
>
>> I have no sound output [using ALSA 0.9.8]
>
> Did you unmute and raise the volume of all channels in alsamixer?
>
Yes
>> It's a via82xx card.
>
> You could have changed the subject ...
>
Done :-)
Alberto Monteiro
-
Hi,
I've recently install the new alsa 1.0.0pre
(alsa-drivers-1.0.0pre2,alsa-lib-1.0.0pre1, alsa-oss-1.0.0pre1),for a intel8x0
chipset. Everything seems to work fine except with "quake III": the sound is horribly
jerky. I'm running on a 2.6.0-test9 kernel, with oss-support enabled and I've pass
Hi ALSA folks,
the alsactl segfault I've previously reported is still happening with
alsa-driver 1.0.0pre2 + alsa-* 1.0.0pre1 (installed from the sources).
- `alsactl store` or `alsactl restore` from the init process are segfaulting,
I can also see an oops in /var/log/message.
- when launching
Hi Takashi Iwai,
On Fri, 21 Nov 2003 11:47:24 +0100 Takashi Iwai <[EMAIL PROTECTED]> wrote:
> At Fri, 21 Nov 2003 10:53:01 +0100,
> wwp wrote:
> >
> > Hi Ryan Underwood,
> >
> >
> > On Thu, 20 Nov 2003 21:58:48 -0600 Ryan Underwood <[EMAIL PROTECTED]> wrote:
> >
> > >
> > > Hi,
> > >
> > >
> Steffen Sauder writes:
>> With the Terratec DMX 6fire 24/96 I'm having trouble
>> making stereo recordings from the various input
> I have added some pcm definitions to my .asoundrc to
> easily select the dmx6fires stereo inputs, after adding
> these you should be able to record from your p
Hi.
I've compiled kernel-2.6-test6 with alsa.
I use snd-via82xx module and oss emulation
to play mp3-s in xmms.
Here is the problem:
Sometimes the sound begins to jingle and I feel
that the song plays faster. It lasts for 2 or 3
seconds two or three times a minute and is very
annoying.
I don't know
At Fri, 21 Nov 2003 10:12:22 -0700 (MST),
Henri wrote:
>
>
> it's not? i chose device 2 'cause of this output:
>
> [EMAIL PROTECTED] root]# cat /proc/asound/card0/pcm2p/info
> card: 0
> device: 2
> subdevice: 0
> stream: PLAYBACK
> id: CS46xx - IEC958
> name: CS46xx - IEC958
> subname: subdevice
it's not? i chose device 2 'cause of this output:
[EMAIL PROTECTED] root]# cat /proc/asound/card0/pcm2p/info
card: 0
device: 2
subdevice: 0
stream: PLAYBACK
id: CS46xx - IEC958
name: CS46xx - IEC958
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
am i way off?
> tony wardenburg writes:
> on a Toshiba Satellite 5205 S503 machine with a PCI Model:
> IntelCorp.|82801CA/CAM AC'97 Audio sound card that is not
> being detected,
For the S5100-503 running here with Debian I compiled Alsa
with "--with-cards=intel8x0 --with-sequencer=yes". The chip
identifie
This is the cat /proc/asound/card0/ac97#0
0-0/0: Realtek ALC650 rev 3
Capabilities :
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhanceme
Hi,
The question is : How config alsa to have spdif used by xine and mplayer.
My suspicion: I have no controls IEC958 threw "amixer controls" ???
I just installed last dev release 1.0-pre1 (with alsa-driver-1.0-pre2).
Technical data of my hardware and system configurations are at the end of t
Ivo Santos Cavalcante Carneiro wrote:
> Ok guys, I tried the new 1.0.0 series of the alsa drivers on my AD1980
> on-board (VIA KT400) and wnat to report some minor errors. The board
> works at all, but with minor problems. Is this list the right place to
> put these feedback?
Yes. Or maybe alsa-de
Otto Wyss wrote:
> In the soundcard matrix the M-Audio Transit USB from Midiman isn't
> listed.
Currently, it doesn't work with Linux.
Regards,
Clemens
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net hel
Alberto Monteiro wrote:
> Clemens Ladisch wrote:
> >
> >> What is this? I have no sound output [using ALSA 0.9.8]
> >
> > No rear, or no sound at all?
> >
> No sound at all. Nothing.
Did you unmute and raise the volume of all channels in alsamixer?
> >> do you think it will work if I get a new v
hey all,
New to the linux/laptop world. Recently put RH 9 on a Toshiba Satellite
5205 S503 machine with a PCI Model: IntelCorp.|82801CA/CAM AC'97
Audio sound card that is not being detected, and of course Toshiba will
not support anything other than windows. So, I have been looking thr
Gonzalo Zapata wrote:
> Hi, anyone with a KT4-V mobo with s-bracket with 5.1 sound working right?? I
> don't hace center/LFE output, the best i could do is duplicate the front on
> the rear.
Which codec is this? (see the first line of /proc/asound/card0/ac97#0)
Regards,
Clemens
-
Henri wrote:
> On 19 Nov 2003, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
>
> > Henri wrote:
> >
> > > On 19 Nov 2003, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> > >
> > > > [EMAIL PROTECTED] wrote:
> > > > > it fails on the call to "snd_ctl_elem_write".
> > > >
> > > > What is the error code/me
On Friday 21 November 2003 05:36, Takashi Iwai wrote:
>> Separately, is the code in 1.0.0pre1 in -test9-bk24?
>
>no. the big update to 2.6.0 tree is now stopped.
Seperately, are there docs on howto add the patches to the 2.6.0 tree
in the distribution? I'm currently running the test9-mm4 branch
Hi Takashi Iwai,
On Fri, 21 Nov 2003 11:47:24 +0100 Takashi Iwai <[EMAIL PROTECTED]> wrote:
> At Fri, 21 Nov 2003 10:53:01 +0100,
> wwp wrote:
> >
> > Hi Ryan Underwood,
> >
> >
> > On Thu, 20 Nov 2003 21:58:48 -0600 Ryan Underwood <[EMAIL PROTECTED]> wrote:
> >
> > >
> > > Hi,
> > >
> > >
At Fri, 21 Nov 2003 10:53:01 +0100,
wwp wrote:
>
> Hi Ryan Underwood,
>
>
> On Thu, 20 Nov 2003 21:58:48 -0600 Ryan Underwood <[EMAIL PROTECTED]> wrote:
>
> >
> > Hi,
> >
> > On Wed, Nov 19, 2003 at 10:10:43AM +0100, wwp wrote:
> > > Hi folks,
> > >
> > >
> > > I usually see the message bel
At Thu, 20 Nov 2003 15:12:20 -0800 (PST),
Dave Neuer wrote:
>
>
> --- Takashi Iwai <[EMAIL PROTECTED]> wrote:
> > At Thu, 20 Nov 2003 10:30:32 -0800 (PST),
> > Dave Neuer wrote:
> >
> > > b) any idea what would be required to fix it to
> > allow
> > > no frame pointer?
> >
> > i'm not sure whic
Hi Ryan Underwood,
On Thu, 20 Nov 2003 21:58:48 -0600 Ryan Underwood <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> On Wed, Nov 19, 2003 at 10:10:43AM +0100, wwp wrote:
> > Hi folks,
> >
> >
> > I usually see the message below in /var/log/messages. Using alsa 0.9.8 over
> > a SuSE 8.1's 2.4.19-4GB,
24 matches
Mail list logo
